Revolution at 2112 RPM

Posted on October 2, 2011 by Steve Bass

For Tom, the guys at Occupy Colorado Springs, and everyone else:

So, if I sit here and carry on about how we can get out of this grief under which so many of us find ourselves buried by living cooperatively, and no one plays along, it’s like division by zero, an operation that produces no definable solution and the thought of which is so troublesome it caused philosopher George Berkeley to suspect all mathematicians could be devil-worshipers on the side. Seriously. A new friend I met at Acacia Park yesterday asked where the little hullabaloo about banks and bailouts and revolution and such was happening in Colorado Springs was asking the general milieu of rabble rousers where their revolution could be expected to go. (Hi, Tom). Some of the guys there, as one might expect, were so fed up with the obviously unsupportable state of current affairs that they were almost gleefully anticipating violence and war–civil war–right here in the U.S.A.. (Hi, Pat). I certainly can’t blame anyone for thinking that way, given that I hoped fervently for exactly the same outcome from around the 3rd grade til only recently, really.

I’ve already mentioned my opinion of the futility of standard issue revolutions. We’ve tried that. It doesn’t work. We’ve tried Monarchies, ordinary dictatorships, “working-class dictatorships”, Capitalism, Communism, Socialism, Ism after Ism–none of what we’ve tried to do has worked, neither for the oppressed nor the oppressors. We’ve been dividing by zero all the while. You should look that operation in the eye some, so you know what I’m saying. It’s the same as proving a negative, or trying to work out the math of the Singularity, and if you find it difficult, one glance at a graph will turn the lights on a little for you. When I was a schoolboy, I always thought it was supremely bogus to respond to any questions about division by zero, (or other imponderables, for that matter), by asserting the answers to be “undefined” just because a conventional answer might be unsatisfactory. I was a weird kid, OK? Look at the link or find something more techie, (a little help, Kathryn?), and then extrapolate the idea to the business of social revolutions and you’ll find my point, or at least one “quantum” facet of it. You could have a look at a representation of the Ouroborus and get the same notion to materialize in your head, maybe.

The shit we’ve been doing has not worked, is not working, and will not work. The answers we’re after will not derive from the operation we’ve been attempting to apply, no matter what.

We compete. That’s just what we do. We compete against one another, against Nature, and maybe against God, though it’s not by any means compulsory for you to think of it in any sort of Divine sense, or wrestle with religious aversions for the thing to work out the same, here. That’s just me. The competition we’ve been so avid to pursue all these generations hasn’t worked any better for the atheists or the religious. If we pursue yet another bloody revolution, we’ll wind up bathing in another absurdly predictable vat of blood, and maybe you super-rich can stretch your inane Grand Game out for a few more years in your bunkers after some of us useless eaters are dispatched and used as semi-organic fertilizer. The snake will still have a mouthful of tail caught up in its throat, if it lives through this one.

Tom was serious about finding a solution when he came by our little protestation yesterday. Pat was just as serious about the blood, I’m afraid. I’ve had enough of blood, so here’s what I’m doing. See what you think. (Here comes the part that might curdle Mom’s blood a bit, but maybe not…maybe not.) I have completely abandoned ordinary reality. It’s never worked so well for me anyhow, and I was already kinda screwed when I came to this notion, so you are welcome to hold on to your own personal misery and think of me as just another hopeless crackpot, if you want–another useless eater. After all, I’m seriously just an 9th grade dropout and unemployed housepainter with bad joints and a broken back, a tragic character out of a Steinbeck novel if you will. Except I don’t feel tragic at all; I’m the happiest guy I know. No shit.

What does it mean to have abandoned ordinary reality? There are lots of angles to that so I apologize up front for the doglegs I’ll be working as I attempt to answer the question. First, I’ve given up looking for a “job”, or the hope of ownership of anything at all, including money. That doesn’t mean I’ve decided to laze around on someone’s sofa til I die of entropic dissipation; I’ve been incredibly busy since this paradigm shift, with no horizon in sight, really. There are millions of people in the shape I was in over last summer, wells running dry and bankruptcy looming while the whole time work to do abounds. I’ve just given up the game those $game pieces$ track, like a chess player laying down his king. Those guys won. It’s OK–it’s only a game, after all. I was never so good at it–never really gave a damn.

Now I find myself in a brand-new and rather sketchily mapped territory where I’m the president of my own head and nothing else, a monarch of abrogation and apostasy. So when Tom asked about a plan, I had to think about it some before I could even say as much as I am right here, right now. The two biggest differences I can define between this new approach and the other are cooperation and good ol’ hippie-dippie, Jesus freak style love and self-abandonment. And not just on my end, see. I don’t own anything, won’t own anything at least so long as I go down this path, and can’t pay for anything or support myself, or anyone else. Well then. WTF?

I’ve always given. Always. I loved Robin Hood as a kid, and I used to do things like stashing random campfire-scented homeless dudes in the back of my room at night, in hope that Mom wouldn’t discover them and put them out in the snow or, even worse, send them packing to jail. (Neither Mom nor Dad ever discovered any of them. Hi, Mom. Hey, Dad ;)) I give away food for…well that’s a fine question. When asked why I spend so much of my time on things like the Colorado College Community Kitchen, the best I’ve been able to come up with in response is that it’s just in me to do. I think it’s been some sort of psychic trade-off for the ethical compromises and outright violations to which I’ve succumbed in my lackluster prosecution of the game of property collection, which I’ve always vaguely known to be a sort of theft, just like the Marxists say. Follow me, though–the Marxists haven’t show me anything not-dysfunctional, either. (Sorry, Michele, Jon).

This new thing is about giving and receiving, and about a different way of seeing the whole picture, like when one of those optical illusions with the hidden horse and rider amongst the trees suddenly becomes apparent. Nothing changes; it’s just revealed–revelatory. I live at someone else’s house. I bring around food for everyone to eat that I never owned. I smoke tobacco that a gracious host brought to me, and hope my phone and broadband will still be operational next week. You’re welcome to pay it for me while I try to figure out how to do this with no game pieces at all. Message me; I won’t be paying for it. I’m living on a prayer, as the song goes, living on Love. You can too, I swear. Quit your shitty job at Wal-Mart’s haircutting kiosk and cut your neighbor’s hair for free. Don’t worry about game pieces. Come down to CC on Sunday and help us give away someone else’s food. Have some! Bring some pizzas from your shop to the protesters. Retire your jersey if you’re a big winner and forget about the conspicuous displays of wealth. We get it. You won! Yay for you! Now put a few families up in your east wing. Love them. Be tender. Let their hapless lost patriarchs know it’s unnecessary to numb the pain with whiskey, or whatever. It’s OK–we won’t call you a wuss, or anything.

Right now there’s Revolution in the wind. I like to read kind of a lot. It seems the handiest way to find out about shit, and I’ve read about a lot of Revolutions. It can make my head spin. If we pursue Revolution we’ll be running in circles. We’ll be eating our tails. The Earth herself is done with our bullshit, and there’s really not any more tail left to eat. Let’s get off the turntable. We’ll be dizzy for a while, but I think we can walk in a straight line if we get our bearings. Get hold of me. I’ve got these words for you all, for free. This is not a trade. I can paint your house, too, or build you a deck or something. If you want to give me something, or give something to my family, or give something to someone I don’t know and will never meet, then maybe you get it. I won’t take it as payment. I’m not in that game.

I hope this works. I’ve had enough tail. How ’bout you?

http://en.wikipedia.org/wiki/Division_by_zero

(Reprinted from Hipgnosis)

Every dollar wants to be free of the Fed

Posted on October 2, 2011 by NMT

US one dollar bill, circa 1963-present It might stretch credulity that the US Bureau of Engraving encrypted prophetic images of the Pentagon –and the not yet built WTC twin towers– in their iconic Reichstag Fire infamy, unto dollar bills folded just so. But who knows, they might have chosen to encode Thomas Jefferson’s oft-quoted but unheeded chiding to the American people: “Every generation needs a new revolution.” And don’t we especially want to ignore this one? “When injustice becomes law, rebellion becomes duty.”

Want a depressing laugh? See what’s passing for direct action strategy

Posted on October 2, 2011 by Eric Verlo

It begins: “Nonviolence is a great power which, when used correctly, can overturn empires.” You see the hole they’ve dug for themselves… For your reading enjoyment, here’s the entire of the Metta Center’s nonviolence page, unedited, gross assumptions, emphasized.

“Overturn empires” –WHICH? Can you name EVEN ONE? Apparently nonviolence has yet to be “used correctly.”

“that power” –Sorry, unproved.

“it’s our only option” –You wish, I guess. You and the forces of oppression.

“the most effective approach” –So you see the problem here. Every conclusion flows from a false assumption.

————————————

Nonviolence is a great power which, when used correctly, can overturn empires. You will be drawing on that power, the full extent of which comes into our hands when we adopt it deeply and consistently, not because it’s our only option but because it’s the option that allows us to preserve our humanity in the process of struggle, i.e. to not further create the problem we’re trying to solve. Just ends and nonviolent means are a powerful combination, and that becomes clearer the longer the struggle goes on. We also get closer to the full potential of nonviolence when we have trained ourselves to the point where nonviolence is practically a way of life, offering unyielding resistance to injustice but never hostility to the true well-being of any person. Nonviolence is strategically the most effective approach in any situation of oppression particularly; however, its full power comes out when we:

have set a determination to identify core issues for which we are willing to make great sacrifices (and compromises on everything else);

have a well developed program of self-improvement and constructive work, building the world we want without demanding that others give it to us;

have a strategic plan that can carry us forward for the long term, using constructive program whenever possible and active resistance when necessary.

—————————–

“great sacrifices” –Martyrdom, victimhood. “compromise” –Punked.

“self improvement and constructive work” –Blame the victim. Onus for change is apparently the responsibility of the oppressed.

I’m sick already. What follows is nothing better than bad religious dogma, based not on morals but psychological engineering. It’s textbook Dale Carnegie, How to Make Friends And Influence People. As if corporations were people.

You can almost smell the crap. What you have here are missionary opportunists seizing upon strife to convert the oppressed to their pie-in-sky-when-you-die spirituality. No different than trying to convert indigenous peoples instead of educating them. Or making drunkards sing church hymns before they get soup.

————————–

Points for Consideration:

I. Nonviolent Strategy Curve

Explanation:
Nonviolent strategies help to create a state of positive peace, restored relations and a higher image of the human being. There are times when conflict is necessary for this process. A nonviolent person will never shun conflict but will always use an opportunity to deepen his or her practice and connection with others.

This curve demonstrates how to create positive peace by advancing nonviolent strategies when relationships deteriorate and dehumanization increases.

II. Anger Under Discipline

Nonviolence is not passivity; it is a power in and of itself. There are three faces of power, according to Kenneth Boulding: threat power, exchange power and integrative power. Threat power is the power of a military force; exchange power is the power of money. Unlike military/threat or economic power, nonviolence is integrative power or love in action. In order to use its power on any scale–small or large–we must as Dr. King said, “harness anger under discipline for maximum effect.”

Anger, like other emotions, is a powerful force. But it does not need to be expressed in destructive or short-sighted action. Anger can be transformed into the fuel for nonviolent, constructive action with a long-term positive effect. What are some ways to “harness anger under discipline?”

1. Respect yourself and respect the goals of the movement by using the means that will achieve the end for the benefit of everybody (aka nonviolently).

2. Never humiliate another human being; all who watch and participate are potential allies, including perceived opponents.

3. Make your movement irresistible, not alienating, through education, professionalism, dialogue, restorative practices and nonviolence trainings.

4. Be willing to take on suffering and insult if necessary rather than inflict it onto others, at whatever the cost to yourself.

5. Be able to articulate clearly and effectively the goals of the movement and see the media as a way to persuade others to join your efforts. This takes reflection and serious strategic planning. Keep the message focused, clear and easy to understand.

6. Take time each day to take care of yourself spiritually. You need to be at your best when emotions and anger are running high. Take time to meditate and enjoy that you are working for a higher purpose.

III. Three Components Needed

Nonviolent struggle has three primary dimensions:

Constructive Programme: This means building the world you want without waiting for others to give it to you, e.g. alternative institutions, local economies, nonviolent leadership models.

Obstructive Program: This is what Dr. King called “non-cooperation with evil.” This includes tactics such as reverse and general strikes, marches, sit-ins, boycotts, etc.

Strategic Overview: In order to have the maximum effect, a movement needs to know when to switch between CP and OP, when to walk away from the police or when to allow for confrontation, etc.. Strategy can be strengthened by an overall commitment to nonviolence, a coherent message to share with those involved and those watching, and disciplined action.

IV. Learning

Take the time to watch other movements. Do not merely imitate but learn from them: understand what worked and why it worked. For instance, if protesters on Wall Street provoked a police struggle, how effective was it for an overall nonviolent goal and how might a different strategy work better?

Constantly assess and re-assess the situation in light of new information and new situations.

Stay in contact with other movements. Share the lessons with one another.

V. Tips for a Long-term strategy:

Sometimes in nonviolence we don’t get what we immediately set out to change, but in the long-term, the situation is more pliable, flexible and change comes more easily. Do not see short term failures as a failure of the method of nonviolence, and do not let anyone convince you that violence would be a better strategy to take. It isn’t. If one needs greater strength, one can “purify” one’s efforts. A simple way is to increase one’s commitment to nonviolence in thought and word. At this point, other practices such as meditation will be tools.

Statistics show that even if violence “works” in the short run, in the long term, it never makes a situation better. As Gandhi said, “violent revolution will bring about violent self-rule.”

The more comprehensive our nonviolence, the greater effect it can have. This means that instead of focusing all of our efforts on outward change, we can learn to deepen our awareness of how nonviolence works, not only on the level of the deed, but in our words and thoughts.

Nonviolence is a form of persuasion and dialogue, not a one-sided form of coercion. Respect the escalation curve model and always try to deescalate a conflict; avoid using the wrong strategy at the wrong time (this is where a strategic overview is essential).

Satyagraha is a last resort strategy for a discussion (looking for a win-win outcome) and can lead to the need for self sacrifice at the highest degree possible. Do not make this sacrifice before it is necessary e.g. promises of fasting unto death without first a willingness to try other strategies are always ineffective. Satyagraha is a method which “compels reason to be free.” We must be reasonable ourselves to awaken the reason of another; we must be willing to take risks and sacrifices (even to our ego) to open the heart of another.

(At Metta, we would like to change the slogan to “Create a New World! Stop the Machine! because in creating a new world, the machine dissolves more readily.)

That’s right, METTA CENTER can’t help themselves from second guessing the OCTOBER2011 slogan. It’s like antiwar detractors insisting message be FOR something instead of ANTI war. You can be AGAINST injustice, inequity, crime, greed, et al, without having to be on the hook for condescending an alternative.

Pseu Pseu Pseudo-Do-Dah-Day

Posted on September 30, 2011 by Steve Bass

For Rob. Thanks buddy! Say hi to yer Mom.

We’ve been toying with some pretty weird bits of thinking here, and it’s already getting hard to follow. Lemme try and tie a few things together. Also, if you’re still with me, now’s a good time to point out that this humble site is best read in conjunction with the discussions on my Facebook, (Steve Bass), and for this bit, especially within the PPCC Philosophy Club page linked from my Wall or wherever it is.

Remember my mention of Pseudo-statements back at Willie’s story? Elsewhere, in Stage Magick and around about, notably at the PPCC Philosopy Club linked off my Facebook, I put up the business of our inability to prove a negative. The assertion that “This statement does not belong in the set of all true statements,” is a nice example. The statement is internally self-defeating, negated by paradox; it’s internally inconsistent, self-contradictory, neither true, nor false– a pseudo-statement. The “set of all true statements” statement is a tidy example in that attempting an answer produces a nonsense response awfully reminiscent, at least to me, of the sort of thing that happens to those hapless physicists when they try to crunch their numbers beyond the event horizon and into the heart of the Singularity. Lots of PHDs get real pissy if you try and take their numbers and drag them into the “real” world here. Like most of us, abstractions are fine for them. Hanging flesh on the ephemeral turns it into a monster for some. I, on the other hand, have no such qualm. If matter isn’t made of matter, as some rather esoteric physics appears to indicate, that most assuredly effects us, sez me.

The problem of proving a negative is stickier than the “True Statements” statement, because we can somehow tell the essence of the genuinely self-defeating pseudo-statement is True. Something about the very idea is akin to the business of the Singularity–we can’t seem to get there, or even define the nature of that There, but we know there has to be Something, OK? And thinking about it produces notions that resonate in our world.

We’ve also talked some about politics, and here’s the clincher. Our whole system, our World, maybe even our very Selves combine to make a big ol’ Pseudo-statement, overburdened by internal paradox and contradiction, and decorated with infinite concentric, overlapping circles and waves of Pseudo-reality.

The “Doctrine of the Many,” claimed by Zoroastrians, Jains, some Gostics, among others, avers that we humans are compound beings. Some scientists at the fringe have claimed this as well, but let me keep this as political as I can for a moment. The concept surfaces in Western thinking when we speak of “talking to ourselves,” which we all know can be quite an argument at times, and in notions like multiple personality. Most U.S. citizens will agree that we are a “Christian” nation in spite of that pesky 1st Amendment. We’ll acknowledge “diversity” in religious matters, but obviously those other guys are wrong and belong in Hell where they won’t fuck up our Christian Zen, see? The foundational Christian documents upon which the edifice of the world’s biggest group of religions includes a whole lot of admonitions about Love. Yet it is hardly necessary to provide examples of the embarrassing fact that a whole lot of Christians are rabid, violence-loving haters dribbling foam from their chins as the rail about how, “God hates fags,” or whatever. Don’t feel so smug if you’re a Buddhist or an Agnostic or < insert your favorite dogmatic crap here> and you still get that rush of glee when you see Saddam dangling from a rope or hear about the supposed demise of Osama. I may argue that a thing can be both A and non-A at the same time, but you’ll have a hard time convincing me that killin’ a motherfuckah is the same as turning the other cheek. Where is the Love in this set of systems/politicals/religions/nationalisms? It’s in there, but only in the sense that it sets the whole business up as a sort of cosmic, (and often comic), Pseudo-statement.

I spoke a bit with my homeless friend Rob yesterday and he told me about a guy he knows with some brilliant talent–musical, I think–that lives outside. Rob had burned himself accidentally and the topic brought to light his friend’s plight; the guy is a multiple, and periodically his alter will emerge and industriously destroy his life. The fellow named his alter Jack, I think, and knows of his existence from observing the destruction “Jack” leaves in his wake, but the two never interact. The guy blacks out and has no recollection of moving about in the world while Jack is in control. Once Jack put his feet in a campfire til the shared body required a lengthy hospital stay. One day Jack just may kill the both of him.

I’m saying Christendom is just like Jack and his host, and so is American society. So is the whole freakin’ society of the whole freakin’ world. Only we suffer from a far more advanced stage of the condition and our legs are buried in hot coals. Our hair is on fire. Those homeless dudes don’t worry about a house, but we’ve been building a huge edifice on a foundation of shit for so long we think we can’t backtrack, but backtrack we must. This house is collapsing upon us right now, as we speak, so to speak, and we need to get the fuck out, tear down the M.C. Esher thing we’ve been trying to build, and start the fuck over or we’re all going to be buried. Our society, societies, lives, and now even the solid earth is/are collapsing under the weight of internal contradictions of our own making.

Most who’ve read so far won’t need me to explain the function of a keystone–the stone at the top of an arch that concentrates the force and thereby holds the arch in place. When the capstone at the top of an arch at, say, a Medieval cathedral erodes, the arch collapses. The capstone of the Christian faith is supposed to be Love, right? Isn’t that key to a great many doctrines? It seems hard to find a player in all the world that will openly advocate for a doctrine of Hatred. Even the nastiest Devil-worshiping headbanger seeks Love, if only amongst his own within the particular bit of the Chaotic waveform in which he finds himself. Whatever. Our shit is missing its capstone. And its foundation is shit, too.

Don’t you dare get all dogmatically ideological and ignore the fact that I’ve NOT preached Jesus here, or any other tributary. We–and I mean all of us, including those of us clutching the notions of enmity so close to our hearts, and those addicted to power–need to stand back, tear the whole house down, and rebuild something with a thoughtfully drawn blueprint. We need to build an edifice on a foundation of Love, designed toward the capstone of Love. When we do that–oh, what a mansion we’ll have!

What did that one dude John say? “God is Love.” Right? Can I get a witness?

Right. Thus sayeth the housepainter.

http://samaelgnosis.us/books/html/revolutionary_psychology/chapter_12.htm

http://www.adherents.com/Religions_By_Adherents.html

(Reprinted from Hipgnosis)

#OccupyDenver gains speed in spite of counterrevolutionaries hitting brakes

Posted on September 30, 2011 by Eric Verlo

You can point the finger at the angry Anarchists, or at the nonviolence biddies who refuse to mingle, but in the end the Occupy Denver General Assembly emerged unscathed. At issue was the third of the St Paul principles, that activists will not condemn each other over divergent tactics. Of course condemnation provokes… condemnation, so the disruptors succeeded with their divisive interjections, until participants concluded that violence versus nonviolence was a non issue. No one wants or plans violence, why pretend it requires sanction or prohibition? For my part I wonder who says youthful exuberance has anything to learn from voices of experience, experienced at failure? Occupy Together is the common goal. The Denver occupation on the capitol steps is now encamped 24/7 and has organized a permitted demonstration on Saturday Oct 1. Local unions have signed on to march, which mirrors the interest labor is now paying in several dozen cities worldwide, just as Occupy Wall Street garners more and more celebrity and media attention.

Yer in the Army Now….

Posted on September 29, 2011 by Steve Bass

So much has been happening lately I’m afraid this will be a big confused mess, but what th’ hey, right?

The world is in a Meltdown. Hell that’s the reason I have time for this crap, ya know? This is NOT a surprise. We’ve all known it’s been coming for a looong time now, though it’s hard to nail down that specific moment when we knew. Maybe we always did. I’ll get to how I think we’ve known, and how we didn’t know we’ve know a different time. For now, a somewhat more imminent thought. Here’s one place to find a buncha bone-chilling stats http://www.theglobaleducationproject.org/earth/index.php . The numbers are everywhere. This is only one source, and far more officious, (don’t mess with me, I used that word on purpose), sources are available. YOU look ’em up. Anyone wanting to look fuckin’ stupid can tapdance around them til–well, til the Apocalypse–and they’re not gonna change, cause tapdancin’ won’t change it. If it was gonna, it woulda! I already put it more or less in a nutshell: WE’RE FUCK-ED!!

But we’re not. We’re still breathing, still eating, drinking, fucking, pumping out babies, and so on. I have two accidental children whom I love without bounds. I genuinely thought it would be rude, at best, to sire a new Person and foist all this bullshit upon him16 years ago when the pertinent romantic interlude took place. Maybe it is, in way, but in plenty of other ways life is as always a thing of such great, broad, deep beauty that I think all potential for its fulfillment ought to be pursued. (Don’t imagine I’ve converted to Catholicism or something–that though was rather more metaphysically driven, and you should put on a raincoat if it looks like rain. Or waders if it looks like–you know ;)) Look around, though. We’re ALIVE!! More than we know. And life shows us in every discrete packet of light entering our retinas that it will rise, no matter what. We can’t kill the Earth. I rather think she’d prefer us to work this out, but she’ll be fine. We can certainly destroy our ability to live here as Humans, though.

In Consider the Lilies, I started to explain what I’m up to here. Every time I approach that question, the answers that come to me sound more and more absurdly grandiose. Save the world? I mean, reeealy! when I was a young child, like in the 3rd grade or something, (no shit–ask Mom), I was politicized and set in a frame of mind opposed to fascism, oppression, and unkindness, for lack of a better term. Everyone knows this is the course of idealism, though, right? I got out in the “real” world and it struck me that one must make some pragmatic concessions to get by. Right? We all learn this, don’t we? Usually when it “strikes” us it’s like a brick in the head. It’s usually thrown at us by some cog in the Fascist machine.

If you’ve read the earlier posts, or caught my live rant, you’ve likely been puzzled by my carryings on about money being a bad metaphor. It’s outdated poetry, good for a time, now hopelessly outdated like that ridiculous, overwrought Victorian romance shyte you may have read in college or high school. (Leave them kids alone, teacher!). “All bad poetry springs from genuine feeling, ” wrote Oscar Wilde, and the old thing has gotten us a long way, in fact, it’s gotten us right here. Fucked. Or on the cusp of some spectacular event(s).

We live in a competitive world. Whichever doctrinal approach one embraces, whether scientifically mechanistic or holding out for divine fiat, it’s the scrabbling over game pieces that has us in this sinking boat. Everyone has to have a buncha shit they don’t need, in order to display for all the other poor losers how dominant they or their team has been in the Game. This isn’t a fuckin’ game anymore, though. Look at those numbers again. Do you really think a little half-assed reduction in increase in greenhouse gas emissions over the next 100 years or whatever is going to save the human race? Get real! Do you really think we might someday pay off our $23 trillion debt, or whatever it is? What’s that shit, anyways? To whom do we owe it? When did we sign that contract? Didn’t someone steal that from us last month? Do we really think we can survive a collapse of the oceans, the food chain, the watersheds, etc, etc, and so on?

I may be grandiose and ridiculous, but I can read the writing on the wall, in the sky, on the face of the Moon. We’re gonna need to stop fiddle-fuckin’ around and wrestle this shit to the ground, or we’re all gonna die. Our kids are gonna die. Our grandkids, if we live to see them, will be mutant freaks like Goldbloom’s fly monster, just like the poor fucked up three-eyed fish around Chernobyl and downstream of a BHP Billiton mine , (BHP: Broken Hill Properties. It’s only a secret if you close your eyes, kids). They’ll die miserably, and the Earth will breathe a sigh of relief, having fought off a pestilent Virus. Or we can CHANGE EVERYTHING.

I saw a panel discussion at the community college yesterday, (PPCC). A Bahai, a Buddhist, a Pagan, and a Christian philosopher walked into a bar and the bartender said, “What is this, a fuckin’ joke?” Oh–sorry. They actually sat behind a table and spoke as cogently as they were able, and we all took them fairly seriously, if with the standard portion of salt–you know it’s still all bullshit, right? A thematic keystone was the notion that we’re all One, that it’s all All-One. You’ll notice me playing that riff for all I can wring from it. It’s got a lot of Soul, and it sounds good. When I say we’re all gonna die, I don’t mean all us minor league players. The whole stadium is collapsing. It’s already collapsed in a lot of ways. Check out my friend Skip’s posts about the Federal Reserve. Don’t be tapdancing when you read. The Fascists will die with us. Their secret bunkers won’t do. Competition is over; the game pieces are reduced to Parker Bros. parts. Cooperative living is at hand.

Only LOVE will save us. That’s right, y’all.Think that’s hokey? Sure. It is. But that’s a view from the old game. I put this shit up because I believe it. I’m just as much like water as anyone else. I’d stay comfortably here at the lowest level if it seemed for one second to me like that might be an option. It does not. It is not. Change or die. Right now. Today. Look me up. I have a couple ideas, and I bet you do too, if you were to stop concentrating on that tapdance.

There are many, many more things to say about all this. Come back and see us, eh?

Viva la rivoluzione!
Viva l’Esercito dell’Amore!

(Reprinted from Hipgnosis)

NY #OccupyWallStreet protest is going to be this generation’s Woodstock. Are you going to miss it?

Posted on September 25, 2011 by Eric Verlo

If you can’t bum a ride to New York City, you are going to miss out, it’s plain as that. But you can make the revolution happen where you are. The Egyptian victory in Tahrir Square wasn’t achieved without simultaneous demos in Alexandria and Suez, etc. The earliest heavy casualties actually happened outside Cairo. In the Colorado capitol, a nascent #OccupyDenver is building steam. President Obama is making a campaign stop in Denver on Tuesday at Lincoln High School at Evans and Federal. That will be an excellent chance to force the media to break its blackout against the anti-capitalist uprising. What’s there to say to President Obama? Nothing right? He’s shown he answers only to Wall Street. But the message to the TV coverage of Obama, and to the people of Denver can be: Why is the bank-owned corporate media not telling you about #OccupyWallStreet? Reclaim our democracy from the bankers.

Colorado Springs is gaga for warmongers, bigots, Zionists and conservative educational campuses. The local Intelligence Quotient doesn’t rise to the level of critical thinking, which is a heartbreaking trait in its youth. But there is an ongoing effort to aid #OccupyWallStreet’s visibility. It’s held on the noon hour, at Tejon and Colorado Ave downtown, at the Booz Allen Hamilton Building, where area war profiteers laugh all the way to the investment banks across the hall, passing by the local FBI office, btw. Our protest doesn’t have the music, mahem & hijinks of NYC Liberty Plaza, but none of the beatings either. Come a few minutes late and you get to pass reserve cops hiding out of our view in the alleys around the critical intersection, in case the bankers want their critics squashed. Possible messaging: DON’T LET BANKERS FORECLOSE ON DEMOCRACY, OCCUPY WALL STREET NOW!

WALL STREET BANKS ARE STEALING YOUR HOME, HEALTH, RETIREMENT, STANDARD OF LIVING, & WORLD RESOURCES. #OCCUPYWALLSTREET –LOOK IT UP.

The revolution will not be televised, emailed unfiltered, or allowed to trend on Twitter, but it’s starting without you

Posted on September 24, 2011 by Eric Verlo

OCCUPYWALLSTREET- Eighty nonviolent #OWS protesters arrested Saturday by NYPD, some penned in and maced, others manhandled, as they marched in NYC against America’s bankster oligarchs. Wall Street proper remains fortified by anti-invasion barriers preventing pedestrians and demonstrators from getting anywhere near. The protest encampment in Liberty Square enters its second week and today’s baptism of police brutality ensures that the Second American Revolution is taking wing.

What are their demands, everyone asks? At the crux, the same as Tahrir Square, REGIME CHANGE, a decapitation of corporatist imperial fascism. The trouble of course is that to average Americans, a “regime” is a foreign entity, usually incorrigible. So long as the MSM defines the terms, the concept of a US regime doesn’t compute. Another reason why #OccupyWallStreet has to be vague about its goals is because calling for the overthrow one’s masters is not legal. For now, what the protesters against Wall Street say they want, is what they want. If you want to have a say in what direction they take, go there and take part. Otherwise, settle for this, their ONE DEMAND:

A Message From Occupied Wall Street (Day Five)
Published 2011-09-22 07:51:42 UTC by OccupyWallSt
at OccupyWallStreet.org

This is the fifth communiqué from the 99 percent. We are occupying Wall Street.

On September 21st, 2011, Troy Davis, an innocent man, was murdered by the state of Georgia. Troy Davis was one of the 99 percent.

Ending capital punishment is our one demand.

On September 21st, 2011, four of our members were arrested on baseless charges.

Ending police intimidation is our one demand.

On September 21st, 2011, the richest 400 Americans owned more than half of the country’s population.

Ending wealth inequality is our one demand.

On September 21st, 2011, we determined that Yahoo lied about occupywallst.org being in spam filters.

Ending corporate censorship is our one demand.

On September 21st, 2011, roughly eighty percent of Americans thought the country was on the wrong track.

Ending the modern gilded age is our one demand.

On September 21st, 2011, roughly 15% of Americans approved of the job Congress was doing.

Ending political corruption is our one demand.

On September 21st, 2011, roughly one sixth of Americans did not have work.

Ending joblessness is our one demand.

On September 21st, 2011, roughly one sixth of America lived in poverty.

Ending poverty is our one demand.

On September 21st, 2011, roughly fifty million Americans were without health insurance.

Ending health-profiteering is our one demand.

On September 21st, 2011, America had military bases in around one hundred and thirty out of one hundred and sixty-five countries.

Ending American imperialism is our one demand.

On September 21st, 2011, America was at war with the world.

Ending war is our one demand.

On September 21st, 2011, we stood in solidarity with Madrid, San Francisco, Los Angeles, Madison, Toronto, London, Athens, Sydney, Stuttgart, Tokyo, Milan, Amsterdam, Algiers, Tel Aviv, Portland and Chicago. Soon we will stand with Phoenix, Montreal, Cleveland and Atlanta. We’re still here. We are growing. We intend to stay until we see movements toward real change in our country and the world.

You have fought all the wars. You have worked for all the bosses. You have wandered over all the countries. Have you harvested the fruits of your labors, the price of your victories? Does the past comfort you? Does the present smile on you? Does the future promise you anything? Have you found a piece of land where you can live like a human being and die like a human being? On these questions, on this argument, and on this theme, the struggle for existence, the people will speak. Join us.

We speak as one. All of our decisions, from our choice to march on Wall Street to our decision to continue occupying Liberty Square, were decided through a consensus based process by the group, for the group.

Will occupying the streets Sept 17, Oct 6 and 15 precipitate an American Fall?

Posted on August 29, 2011 by Eric Verlo

“American Fall” would be a pun, yes. A pan-Arabian-like Spring causing the US anti-democracy to tumble, being the objective. The English riots have put a dark spin on what might be Middle America’s reception to popular uprising, but mark the dates, because the brass ring nears whether you have the courage or not, and you won’t have the stomach for the alternative.

You’ve probably already sensed the buzz about #SEPT17, campus groups across the country have been bypassing the conventional chaperones to coordinate OCCUPY WALL STREET. Can they do it? Not without your help, and that doesn’t mean switching your phone service or knocking on doors to Get Out The Vote.

Donate, organize or help with the logistics. If you’ve the temerity, attend in person. At the very least, you’ll have your expenses reimbursed when the city settles your civil suit against them for false arrest. New York City already budgeted for the insurance policy that will pay the legal settlements for the probably now textbook law enforcement practice of kettling inconvenient protests. Or, thinking positively, you may just witness history. To make history you have to make it. Don’t leave it up to the Little Red Hen if you want a piece.

Next up is #OCT6, although the day varies regionally. The date marks the 10th anniversary of the Afghan invasion, but social justice groups of all stripes are throwing their sundry complaints unto one banner and have organized marches nationwide. Of course the nationals aims to SEIZE DC, where activists will converge on Freedom Square, English for “Tahrir Square”, with plans to camp there until the people’s voice is heard. DC has passed ordinances against overnight protests, but Freedom Square may be cut some slack for being off the National Mall. It’s a smaller public space which lies on the diagonal between the White House and the Capitol Building, abreast of General Tecumseh Sherman’s horse actually.

The determination to reclaim American Democracy with an action in DC hopes to recreate Madison Wisconsin on the Potomac, with the same grassroots support for a broad set of issues to which both parties have shown themselves unresponsive.

A successful DC foothold will get real traction being closely followed by an international call for a worldwide uprising. #OCT15 is being spearheaded by Spain’s movement for GLOBAL DEMOCRACY. Will it dilute regional efforts to have actions running concurrently, or will synchronized demonstrations overwhelm our transnational overseers? We can wait and see, or we can give it our best shot.

Here are more graphics in support of the kickoff September 17. Borrowing from Tunisia and Egypt, and before that Chicago 1968, it’s US Days of Rage.

In the course of a single spring we’ve seen massive demonstrations which provoked governments to interrupt cellphone service, shut down internet access, and answer protestors with direct gunfire. To what extreme will the USG be driven? What rights remain inviolate in the US? Not communication. Activist cellphones were blocked on the BART in San Francisco to thwart protests against police brutality.

Organize, but think outside the school

Posted on August 3, 2011 by Eric Verlo

I love this graphic, it’s clever, it’s instructional, sort of. It offers at least the illusion of parity in a big fish eats little fish world. Because you know, it’s not going to work unless one of the little fishies is packing a spear gun.

Oslo bomber was less Christian Jihadist than Dexter, Arrested Development

Posted on July 27, 2011 by Eric Verlo

Another excerpt from Breivik’s dairy, covering the preliminary phases, backdated to 2002:

Personal reflections and experiences during several preparation phases April/May 2002

I am the Norwegian delegate to the founding meeting in London, England and ordinated as the 8th Justiciar Knight for the PCCTS, Knights Templar Europe. I joined the session after visiting one of the initial facilitators, a Serbian Crusader Commander and war hero, in Monrovia, Liberia. Certain long term tasks are delegated and I am one of two who are asked to create a compendium based on the information I have acquired from the other founders during our sessions. Our primary objective is to develop PCCTS, Knights Templar into becoming the foremost conservative revolutionary movement in Western Europe the next few decades. This in relation to developing a new type of European nationalism referred to as Crusader Nationalism. This new political denomination of nationalism will become the foremost counterweight to National Socialism and other cultural conservative political denominations, on the cultural right wing. Everyone is using code names; mine is Sigurd (the Crusader) while my assigned mentor is referred to as Richard (the Lionhearted). I believe I’m the youngest one here.

I am going to discontinue my involvement in the Norwegian Progress Party as I have lost faith in the democratic struggle to save Europe from Islamification. After 65 years of harsh political oppression, demonization and ridicule from the communist-globalist cultural establishment, directed at any and all who opposes multiculturalism, there are still no indications that this communist-globalist hegemony will ever allow PP to take control. My party is systematically vilified and sabotaged by a united media before every single election. And even if they ever did manage to form a majority government with Høyre (the Conservative Party) their principles and party program would not be conservative enough to halt the ongoing Islamic demographic warfare OR increase the ethnic Norwegian fertility rate from 1.4 to 2.1. The only thing PP has achieved so far is to give false hope to Norwegians. They say that democratic struggle is the only solution, when it is clearly already lost. How can we democratically compete with a regime that is mass-importing hundreds of thousands of new voters? The PP is pacifying Norwegians by giving them false hope and I refuse to continue to have any involvement in this. Armed struggle appears futile at this point but it is the only way forward.

2002-2006
I am required to build a capital base in order to fund the creation of the compendium. I don’t know if I will ever proceed with a martyrdom operation at this point as it simply seems too radical.

My plan A is to attempt to acquire 3 million Euro, in which case I plan to establish a pan- European organizational platform that will attempt to grow organically as a support organization which will distribute a “legal version” of the compendium.

If I fail to generate the specified amount I will move forward with the operation, in order to market the compendium that way.

As of 2005 I have managed to generate 500,000 Euro, but I am still 2.5 million Euro short. I will attempt to generate the remaining amount through continued stock/options speculation. I can afford to lose up to 250,000 Euro without it compromising the completion of the compendium and the subsequent effectuation of the operation.

Stock/option speculation did not work out. I will need to cut my losses and proceed to plan B.

After cutting my losses, I now have a minimum of funds to complete my two tasks (in excess of 250,000 Euro).

2006-2008
Researching and writing the compendium: “A European Declaration of Independence”

Autumn – 2008
I attended a birthday party in Oscarsgate, Oslo. We were attending a birthday party organized by a good friend of Axels’ girlfriend, Synne. I noticed the woman who celebrated her birthday was working as a judge. A majority of the people at the party where jurists – judges and lawyers in the public sector. I chatted with most of the people at the party. It really struck me how incredibly politically correct everyone were, as if they were all members of the Norwegian Labour Party. I have never before experienced a group of people who are completely freaked out about discussing political issues relating to multiculturalism and Islamization. I noticed a majority of these people were Labour Party sympathizers. I guess they don’t really have a choice considering the fact that they are all climbing the public sector hierarchy. A thought occurred. The judges during WW2 who had party affiliations with the NS or any affiliation with the SS were prosecuted and imprisoned. Is it therefore only fair that judges of high rank with party affiliations to the Labour Party and the other parties who support multiculturalism (and therefore Islamization) are to be considered category B or C traitors? They obviously have a considerable responsibility and should be considered traitors of their people. I would imagine most of them would be considered category C though as their influence is considerably less prevalent than that of any parliamentarian, editor/journalist or university professor/lecturer. In any case, nice people though and we had a good time. If only they had any idea that one of their guests was a Justiciar Knight of an organization affiliated with the Norwegian and European Resistance Movement, I would be thrown out immediately most likely. It is completely understandable as their careers would be over if they had any affiliation with such organizations or individuals.

Autumn – 2009 – Birthday party
My best friend, Peters, 30th birthday. We are going to Budapest to party hard for 5 days. This is my second trip to Hungary. I really love that country and the people. Clubs in Buda are top notch. Excellent elektronica scene, among the best in the world. Hungarian girls are hot as hell, too bad I have to avoid relationships for the good of my mission. Doesn’t hurt having fun though 😀 I don’t think I’ve consumed this much alcohol for many years, totally awesome. My best friends, Martin, Axel, Marius and Peter went down and hooked up with another band of Norwegians we have known for some years. One of Martins best friends are Jon-Niclas, really cool guy. He’s a rather well known Norwegian comedian, together with his partner and friend Anders, and a few others. We had a lot of fun down there, the ten of us. Most of us know each other from Nissen High School in Oslo.

Autumn – 2009 – Phase shift
I’m in a phase shift with my project. The compendium is complete and I currently preparing for the next phase. I’m creating two different and “professional looking” prospectuses for “business ventures”. A mining company and a small farm operation. The reasoning for this decision is to create a credible cover in case I am arrested in regards to the purchase and smuggling of explosives or components to explosives – fertilizer. In this regard I created a new company called Geofarm, which might act as a credible cover for such activities. I spent about 2 weeks cannibalizing an existing Mining prospectus. In addition to the prospectus I have created I will create two websites and business cards. I also intend to contact suppliers of equipment related to these industries so that they may act as future witnesses, collaborating my story, should I ever need it. If I do get arrested in this “acquirement phase” I figure that they will have a hard time proving that my intention is to contribute and fight in the ongoing European civil war. Sure, they will attempt to charge me with terror but they will not have enough evidence to incarcerate me (due to my covers). Also considering the fact that I have never done anything illegal in the past. If I do get caught I will, however, be placed on every imaginable watch list for the rest of my life and will thus be unable to partake in any advance operation. In this case I will have to cancel the primary operation and instead go with my secondary operation of lesser significance. Such is the life of a resistance fighter.

November – 2009
I’ve spent a few weeks contributing to set up a cultural conservative newspaper with national distribution in Norway. The idea is to develop Document.no, a cultural conservative blog into a newspaper company with 12 publications per year. I’ve developed a relatively complex strategy and forwarded it to Hans, the editor and manager. I have made a few attempts to seek funding although my efforts haven’t materialized yet. I tried to formalize cooperation between the Progress Party and Document (both moderate cultural conservative entities), at least in an incubation period. However, after discussing this with both FrP and Hans it would appear as they do not want to take part in any form of cooperation with each other. I have spent approximately 50 hours developing potential strategies for Document.no, pro bono, but I will have to limit any further involvement due to my primary operation. Hans Rustad, the leader of Document.no, seems like an odd fellow. I’m usually excellent in psycho analyzing people but I haven’t figured him out at all. I know he has a Marxist background and I believe he is in fact something of a rarity – an actual national Bolshevik, and thus not a real nationalist. He likes to criticize the multiculturalist media hegemony in Norway but is completely unwilling to contribute to create any form of political platform or consolidation. He seems extremely paranoid and suspect of most people and he likes to attempt to ridicule and mock Fjordman, every time he writes a comment. Document.no has developed into a kind of moderate cultural conservative think tank where moderate cultural conservatives exchange thoughts and make comments on the articles posted. Hans likes to criticise cultural Marxist media (MSM) but is unwilling to present any solutions or to contribute to any form of consolidation of an “alternative”. Despite of that, I don’t mind contributing somewhat as it benefits our cause, regardless.

December – 2009
I’ve now worked with email farming for two months. God, I wouldn’t have imagined it was going to be this f…… boring 😀 I’m using Facebook to target various nationalist related groups and inviting every single member. I’ve managed to farm approximately 1,700 email addresses this way. I did generic swipes of various blogs and internet sites earlier this year as well. Total number of email addresses is approx 3,000-5,000, haven’t made an exact count yet <3 Ofc, it’s a quite tedious task due to the fact that Facebook has a 50 invitations cap per day. Even with my two accounts I’m limited to inviting a maximum of 100 per day, where an average of 40-50% accepts. Of these 40-50% around 90% have email addresses whereas approx only 50% are checked on a regular basis. So of 1,000 Facebook friends I will achieve a penetration rate of around 20-30%. Not optimal but then again, I can’t think of a more efficient way to get in direct touch with nationalists in all European countries. Christmas – 2009
Have been in a few Christmas parties with friends, fun although I’ve gained some extra kilos 😀 I’m currently 7 kg overweight up 3-4 kilos the last three months. I started the hardcore training program a few months ago but chose to end it in order to complete the book and email farming process. At this point I’ve extended the writing phase 4 times due to the urge to extend certain chapters. These delays are starting to severely affect my budget leaving me with less than 42k Euro in direct funds and another 25k in credit. I really need to finalize this compendium soon and move on to next phase (research into weaponry, armor and explosives followed by acquirement phase). Will have to destroy my old hard drives and buy new ones before the research phase, and then destroy these ones again before acquirement phase. It takes ages to farm quality email addresses from Facebook.

Anyways, moral is on an all time high but physically I’m at an all time low. I really need to start my training program soon… but still aprox 1-2 months before my time budget allows me to focus on this. Btw, I just read that an alleged Swedish neo-Nazi group, who allegedly planned to assassinate Swedish category A and B traitors, had been uncovered in connection with the theft of the “Arbeit macht Frei sign”. Hmm, I always wondered if these guys are actually National Socialists or if it’s just typical cultural Marxist propaganda. Perhaps it’s my fellow co-founder of PCCTS, my sister-cell??? I guess I won’t find out unless they publish the names. I doubt it though. They seem to be using the outdated, traditional and vulnerable hierarchical military cell-model which indicates that they are from an old school and un-related resistance fraction.

January 2010
I was out with Peter and Didrik today. We had some drinks at Peter’s bachelor pad near Bogstadveien, probably the most prestigious place to live for bachelors in Oslo and not far from where I used to live when I was still in the “game”. We then went on to a nearby restaurant, had an incredible meal, drank some more and met Peter’s girlfriend and her friends. We had a few beers and talked, very cosy <3 I remember telling Christine about my career as a writer, telling her that I wasn’t planning on actually selling the book but rather to distribute it freely in order to more efficiently propagate our cause to a broader audience (they were all cultural conservative btw). Christine told me that she believed I was driven by idealism, which is of course true, but that I actually lived my dream. While I didn’t want to start to argue that particular factor, as I don’t like appearing like a pooper or to risk blowing my cover, it got me thinking. Are, we, the reactionary revolutionary conservatives really living our dream or are we making a sacrifice? To be honest, if I felt that other people could do my job I would not do what I do, that I can guarantee you. I don’t want to do what I do, I would rather focus on starting a family and focus on my career again. But I can’t do that as long as I feel like a person caught in a burning spaceship with nowhere to go. If you see the ship is burning you don’t ignore it and start cooking noodles do you? You put out the fire even if it endangers your life. You don’t enjoy putting out the fire but it is your duty to yourself and your fellow crewmen. And let’s say your crewmen have been infected with a rare virus that shuts down their rational senses and they try to stop you from putting out the fire. You can’t really allow yourself to be stopped by any of them as it will lead to your collective death. You will do anything to put out that fire despite of the fact that they are trying to stop you. Anything else would be illogical. But sacrificing yourself for others who probably detest you for it doesn’t necessarily have to be a miserable experience. After all, we have the truth and logic on our side and we will learn to find rewards and comfort in our actions. After all, sometimes being uncompassionate is the most compassionate thing you can do. Anyway, back to email farming on Facebook, aaaaarrrrggh :/ It’s driving me nuts, lol. I’m currently working on French leads/FB groups. An extremely tedious and boring task – preparing quality contacts from scouring patriotic Facebook groups and sending out 100 select invitations per day (from 2 FB accounts). I’ve been doing this for 60 days straight now, 3-4 hours per day. FB networking isn’t all that bad though as you do meet a lot of interesting, like minded people. This is the main reason why my book has been delayed. I just feel that I must send my book to at least 10 000 primary nationalists in the European world and I’m currently at 6000 email addresses. Good vocal trance music makes this task a lot less boring ;). My funds are depleting gradually though; currently at 50,000 Euro + 30,000 Euro in credit limits (12 credit cards ftw), which will force me into the next phase of the operation soon. A usual day for me involves email farming, writing, sharing “moderate” resources from my book on debate groups to coach fellow cultural conservatives, smoking, eating chocolate lol, taking a daily 1 hour walk/motivational meditation and doing some occasional battlegrounds in WoW on my badass Horde resto druid. I just completed Dragon Age Origins not long ago. A brilliant game! 😀 It’s important to have fun a few hours every day. I regret to admit that I’ve become a notorious downloader of pirated movies, series and games etc. but have noticed that an increasing number of sites have been closed down lately. Stealing is bad, I admit, but then again, when you have devoted your entire life to a good cause you can allow yourself some naughtiness especially if it can contribute to conserve your funds, cough ;). Yes, yes, no one's perfect 😛 February 2010
I just bought Modern Warfare 2, the game. It is probably the best military simulator out there and it’s one of the hottest games this year. I played MW1 as well but I didn’t really like it as I’m generally more the fantasy RPG kind of person – Dragon Age Origins etc .and not so much into first person shooters. I see MW2 more as a part of my training-simulation than anything else. I’ve still learned to love it though and especially the multiplayer part is amazing. You can more or less completely simulate actual operations.

I’ve continued with email farming until now, on a daily basis. The email farming phase is coming towards its end and I will conclude it by at least attempting to acquire as many email addresses to members of parliament in Western European countries as possible. Because I think focusing solely on distributing the compendium to patriots would be a mistake as they have little to no political influence in the EUSSR/USASSR hegemony. It is important that our enemies know “how we see what they are doing”. The national intelligence agencies of Europe will do everything they can to limit its distribution. They will not allow the parliament members of any nation to read it, so we must send it directly to them.

It’s a shame I have to purge my 5,000 Facebook contacts. It took so much time and work to acquire all those contacts and I get the feeling I’m purging a little piece of my life, lol. But I did get what I came for after all; every individuals email address.

It is still too snowy and cold to initiate the acquirement phase (acquirement of weaponry and armor etc). My agenda the following months looks like the following:

1.
Conclude email farming

2.
Conclude the writing of 2083 and secure it. This post will be one of my last entries. I will have to secure the compendium at a safe location until the week before operation (today is Feb 7th btw).

3.
Change hard drives (phase shift), purge all evidence from other phase.

4.
Initiate the research phase: research the possibilities for the acquirement of weaponry and armor, the making of WMDs (explosives), acquirement of components of WMD, research of logistics and storage opportunities.

I have budgeted 2 weeks for the research phase, but it might take up to 6 weeks.

The research phase will be followed by the acquirement phase where I have budgeted 4-8 months. The acquirement phase will be followed by a one week only construction/preparation phase.

Btw, I just received what looks like a mass recruitment message from one of my 5000 Facebook contacts (he’s wearing a balaclava in his pic btw with a t-shirt with the SS skull insignia). The message goes like this:

Hails!

“help support are worldwide organization ATB Aryan Terror Brigade a branch Of blood and honour, if you are interested reply…..”

While I have to admire the young lad’s initiative and probably noble intention (he probably doesn’t have the faintest clue what National Socialism or constructive and meaningful resistance is) the lack of subtlety and discretion is unfortunately the current trademark of many European amateurish resistance groups. They probably want recruits in their Jew/immigrant bashing efforts… Many of these people are causing so much damage to the nationalist cause that I sometimes wonder if they are on the payroll of the cultural Marxists. Regardless, my hope is that this compendium will contribute to a significant “leap in evolution” of the current climate of cluelessness and incompetence.

March 2010
I have ended my “email acquisition phase” ending up with a grand total of 5,700 Facebook contacts (2 accounts) and a total of 8,000 high quality email addresses (representing all spheres of cultural conservative thought). I now have a direct way forwarding my compendium to a good portion of the most dedicated nationalist oriented individuals in all Western European countries, including the US, Australia, Canada, South Africa, certain Eastern European countries, Armenia, Israel and even India. This task has taken me several months and it pained me to purge all my FB contacts. I’ve talked and discussed with hundreds of patriotic individuals (many whom are nationalist oriented intellectuals fighting the good fight), many good people, which made the decision to purge the contacts even harder. I have now moderated by FB profile considerably and transformed it to a politically correct profile. I do fear sometimes that my endeavors relating to the research of the book, and acquisitions of these addresses has resulted in me being put on various watch lists. I know that at least a few of the profiles I invited are fake, and used for information gathering for various European and US intelligence agencies. The question is; have they flagged me? I guess I will find out eventually…

I went ahead and sold some of the last sets of items I possessed, from my former life, which had value. It was a complete 40 piece Versace-Rosenthal dinner set worth approximately 5,000 Euros. I bought it a few years ago for 2,000 Euros and just sold it for that price. I know I should sell my Breitling Crosswind (new price: 7,000 Euros), but sentimental value has thus far prevented me from doing that. Actually, I still have a corporate HP printer (new price 4,000 Euro). I may attempt to sell that later as it’s pointless for me to own one. I do have a quite large booze and wine collection which I have collected over the years. Several of the red wine flasks are from 1979, and therefore possibly worth a fortune. I do appreciate a glass of vintage red wine so I may actually drink it, prior to execution of operation. I have given away a few of my paintings to friends. I will keep the rest hanging, as I still appreciate the works.

The compendium is in its last phase. I have worked quite hard the last two months to complete it. I estimate that I will be able to complete it within 2 weeks.

Time is of the essence, and I really need to start the research phase (for the actual operation) and begin on the physical transformation phase. I have to wait until I have secured the compendium at multiple locations and purged and destroyed my hard drives.

Moral is peaking. I can’t wait to share the compendium with fellow brothers and sisters. This will be one of the last entries btw. I may or may not add more to this log prior to execution of operation.

July 2010
I recently successfully finished the “armor acquisition phase” and have created an armor cache by secured a full Pelican case underground. I basically dug it down somewhere deep in the Norwegian forest. It was my first experience with this type of assignment and I underestimated the planning needed to complete the job. A few days ago, I got up at 5.00 in the morning and spent a couple of hours packing for the trip. By using Google Earth I had selected a desolate location (approx), deep in the forests of Norway. I did not yet know the exact location when I set out on the trip, loaded with my cargo. The Pelican case contained a complete set of Lokis armor – shield included, caltrops, police insignias and various other equipment needed for the operation. I was unable to place the Damascus FX- 1 Flexforce riot suit and the Molle, pouch carrier in the Pelican case so I stashed it on the attic marking it as “air soft equipment”. That will have to do… The Pelican case was so full I had to physically sit on it to be able to lock it properly.

Anyway, after about a 3-4 hour drive I arrived at the area and I started to scout for small roads of the highway, as a car parked by the highway would cause unwanted attention. I found one potential location and drove my little Hyundai weenie car down a dirt road. These cheap urban cars are obviously not for off road use so I almost ended in the ditch. I parked the car and scouted the area on foot for an hour but with little success. An appropriate location involves finding an area with soil that you can actually dig in so it excludes areas close to rocks or near trees (all the roots will make it too hard to dig). I drove for half an hour and started scouting another location. I found what I thought could be an appropriate dig site and fetched the shovel and two big plastic covers for initial testing of the soil. I could tell by the topography that not many people had been here before. The forest was very compact with a lot of spider webs, and hundreds of flying bugs around. I have serious issues with spiders so I just had to block those thoughts out. Of course, it was a giant rock just 10 cm below the soil of my first attempt… Regardless, I continued digging close by and eventually found a suitable spot. When in the “identification process” you should expect a few unsuccessful attempts. You should at least dig 1.5-2 meters vertically and you obviously need a little bit of luck. I was considering getting an echo sensor gadget for this purpose, which can reveal whether there are obstructions below the ground etc. However, getting one would be a hassle, so I just decided to do it the old fashion way.

I started digging at 11:00 and continued for three hours straight. There were a lot of mosquitoes annoying the hell out of me despite of the fact that I was covered in anti-mosquito oil. Why oh why didn’t I bring a mosquito head-net… Due to the intensity of constantly digging, the heat and sweat forced me to remove everything except my boots and my Skins compression gear. The bugs had a field day for sure… Digging for hours is exhausting but I continued pushing my tolerance level as I really wanted to finish before dark. At around 16:00 I was out of water, I had emptied by 1.5 litre Camelbak pouch. I had been digging continuously for 5 hours and was completely exhausted, yet I hadn’t even finished digging the hole… I was getting increasingly frustrated as I couldn’t go on much longer without water. As I didn’t want another day of this hell (4-6 hours driving total + digging) I made the best out of the situation and went to prepare the cargo in my car for transportation to the dig site. I had originally planned to split the content of the case into four and carry it in my backpack to the site. The case was too heavy to transport in one go without problems. Unfortunately, with my water issue I really had no choice. I literally dragged the 70 kg case to the dig site. It was extremely exhaustive but it saved me approximately 30-60 minutes. At 18:00 I had secured the case underground and filled in all the dirt. I then spent around 40 minutes concealing the dig site by transporting branches and leaves from other parts of the forest. After one and a half hours drive I finally reached a gas station. I was quite dehydrated at the time. Needless to say; that was the best coke and hotdog I had consumed in ages…

I realize that I rushed the end process due to the fact that I had underestimated several aspects of “dig site management”. I will not make the same mistake when I’m securing my weapons after the “weapons acquirement phase”. Lesson learned.

August 2010, 1
Phase shift – armor phase to weapons phase; hard drive replaced with new one, and all evidence from former phase purged. I’m preparing for a car trip to Prague to establish a weapons connection for the acquisition of an assault rifle, a Glock, splint grenades and AP ammo (grenades and AP ammo is a bonus). Prague is known for being maybe the most important transit point for illicit drugs and weapons in Europe. I spent a couple of days planning the trip as it takes around 15-17 hours to drive and it involves the car ferry from Sweden to Denmark and another ferry from Denmark to Germany. I might just take a car ferry from Oslo to Germany. It will be hard to avoid using my visa during this trip but I will try. My mobile will be turned off during the entire duration and will only be turned on in an emergency. I have researched all relevant information; hostel info for Copenhagen, Berlin and Prague. If I fail to accomplish my objective in Prague my secondary attempt will be in Berlin. If that fails as well I will drive all the way to Serbia. My encounter with the criminal networks in Prague will not go without risk. I will have to try to establish a connection via Taxi drivers, and/or through the clubbing/prostitution scene. I just hope I make it out alive… I will at least avoid all ferries and electronic payments on the return trip and cross the northern border (it has minimal presence of custom officers), just in case I am somehow under surveillance. Better to be safe than sorry etc. When I return and secure the weapons I can finally initiate the “explosive phase”. More on that in another chapter.

August 2010, 2
As the “armor acquirement phase” has been successfully completed it is now time to move on to the “weapons research phase” followed by the “weapons acquirement phase”. I’m planning a road trip to Denmark and Germany as backup targets and Czech Republic as the primary destination with the intention of buying an AK-47 (7.62) and a Glock 17 or 19 (9 mm).I’ve spent the last two to three weeks researching clubs or similar places where medium-scale drug dealers frequent. Drug dealers are the best bet when looking to establish a weapons connection, after all. They, or their suppliers, have functional smuggler routes from other East bloc countries, the Balkans and from Turkey. While they prefer to trade drugs, due to the space efficient nature of narcotics, they are usually able to provide weapons as well. If they don’t have any weapons in stock, they are usually able to order arms from their couriers.

I can’t say I’m looking forward to this trip. I’ve heard that Prague is the most dangerous capital in Europe with a lot of very brutal and cynical criminals. There is a chance ill get killed down there by some desperate criminal individual. In any case; I’ve prepped by car, hollowed out the back seats of my Hyundai Atos and it should be room for weapons, a few frag grenades and AP ammo. The car is really crap so I hope it won’t break down in the middle of the autobahn. Several people on the Hyundai forum said I would never reach my destination and back in that car, lol. I guess we will see… The reason I chose it in the first place is that it looks like a pensioners car, so it not likely that I will be stopped in customs controls when I smuggle the arms back to Oslo.

Today is the day; I’m driving down to the ferry now. It will take me from Oslo to Kiel, whereas I need to drive approx 9 hours straight to Prague where I have booked a 6 day stay at a relatively cheap hostel. I have usually gone with hotels in the past but they are not great for socializing. Nothing beats a Hostel when it comes to partying and getting to know people etc. This trip is going to be a fascinating experience. I’m just trying not to think too much about what might happen when I approach drug dealers. I’ve decided I want to get most out of the trip so I have made a schedule including visits to all of Prague’s tourist attractions. I will do this during the day time, and go clubbing at night looking for a connection.

I’m been two days in Prague. I’ve sorted a few tasks I wanted to do. One involved professionally printing prospectuses which will serve to strengthen my cover stories in case I get apprehended pre-operation. The prospectus is basically a Mineral Extraction business plan explaining in detail why I would need to create explosives. The cover story involves the manufacturing of explosives without a permit. Everything is specified in the prospectus which should be enough to create a reasonable doubt regarding any potential terror charges, should I ever get caught. I also got several police ID badges and other related insignias professionally printed, paying cash of course. Printing these back in Norway would only result in the clerk notifying the authorities.

So only one thing remains; I need to find my weapons connection within 4 days…! I failed miserably yesterday; I went to two brothels and a couple of clubs. The people I approached got really nervous and thought I was either a cop or completely nuts, lol. I have had to refine my approach pitch. It started off really bad. Whatever you do when trying to establish a gun connection, never be too direct;

Hello there; I want to buy an AK-47, 4 frag grenades, 1 Glock and AP bullets. (Guy will run for the hills before you have completed the last sentence 🙂

This city doesn’t seem dangerous at all btw. I have no idea why that BBC documentary would present such incorrect information. In fact, I feel even safer here than back in Oslo. Probably because there is basically no Muslims living in this country. Most of the criminals here are Christian Gypsies and I have found out that most of them have been basically chased away from the capital, Prague, to other Czech cities. I can understand why the government would want to do this. Prague is like a giant Museum of ancient European historical sites and attracts millions of tourists annually. All the criminals that was here a few years ago was bad for business. I have never seen this many tourists in any other European city; Paris, London and Berlin included. Downtown Prague is packed with thousands and thousands of tourists, even now in September.

Day 5 in Prague. I’m getting desperate. This is the first major setback for me during my operation. I am so disappointed by myself. I realize now that Prague is far from the ideal city when looking to buy arms. Western European capitals are probably a more suitable location to establish a connection as that is the end destination of the arms that come through here. Prague may be a transit point but finding the actual couriers or sellers has proven to be a hard task. Also, I guess I wasn’t motivated enough, considering the fact that I could have just purchased a legal semi automatic rifle and a Glock in Norway. I have approached several shady looking individuals but I would have tried a lot harder if it weren’t for the fact that I could buy guns legally.

I have now decided to abort this sub-mission and rather focus on acquiring the weapons I need legally, back in Norway. Regardless of the outcome of this mission; I have had a great vacation and have experienced most of the historical sites and a lot of amazing architecture. I’ve also partied a lot with the people I met at the hostel. Time to go home…

The trip back was a bore. My Ipod batteries died halfway to Copenhagen. I stayed the night at a hostel and drove from Copenhagen to Oslo the next day.

September 2010
I originally wanted to try establishing a connection with Hells Angels in either Prague, Berlin or Copenhagen. However, I lost my motivation completely during my first few days in Prague. I now have to acquire a semi-automatic rifle and Glock legally. I don’t think the rifle will be a problem, as I have completed the 1 week duration hunter course, and I have had a Benelli Nova Pump-Action shot gun for 7 years without incident. I don’t have a criminal record so there is no reason why the police should reject my application.

I have now sent an application for a Ruger Mini 14 semi-automatic rifle (5.56). It is the most “army like” rifle allowed in Norway, although it is considered a “poor man’s” AR-15. I envy our European American brothers as the gun laws in Europe sucks ass in comparison. However, the EUSSR borders to Turkey and the Middle East so acquiring illegal arms isn’t exactly rocket science providing you are motivated enough. In any case; I would rather have preferred a Ruger Mini 30, but I already own a 7.62 bolt rifle and it is likely that the police wouldn’t grant me a similar caliber. On the application form I stated: “hunting deer”. It would have been tempting to just write the truth; “executing category A and B cultural Marxists/multiculturalist traitors” just to see their reaction 😛

Acquiring a pistol, legally, is more tricky. I have been a member of Oslo Pistol Club for a few years but it is required that you train regularly in order to be eligible. I will have to train more often this winter and ensure I build up a solid track record, which in turn should enable me to get a permit.
I have now changed my hard drive, again, and I’m now going to start the “explosives research phase”. I’ve been looking forward to this phase for a long time.

October-November 2010
I have just completed the “explosives research phase” and have summarized several new chapters for the compendium. My rifle application came through and I have now ordered a 800 Euro silencer specifically created for automatic and semi-automatic rifles. The Ruger Mini 14 costs about 1,400 Euro including a customized trigger job from the gun smith. I will have to buy a new stock with picatinny rails (400 Euro) and 30 bullet factory mags (60 Euro per mag) from a US supplier.

I have now cleared out all of the information (evidence) from the previous phase and changed my hard drive once again. I am now ready to start the chemical acquirement phase…! 🙂

I was at a party yesterday with a few friends from high school. One of them, Trond, who apparently had evolved into a relatively extreme Marxist, often joining ANTIFA (Blitz) demonstrations… We were both into hip hop back then and he had apparently continued down that road. We had some interesting debates that night while drinking… 🙂 Can you believe the hypocrisy of some people? The guy lives in a Norwegian only area in the middle of a Muslim ghetto at Tøyen in Oslo. I asked him; don’t you consider yourself to be a hypocrite considering the fact that you support mass Muslims immigration and at the same time refuse to actually live with them, and instead barricade yourself in a safe Norwegian area? Needless to say, he didn’t have a good answer… I went on about the fact that there is no such thing as a Palestinian. The concept known as Palestine and Palestinians is a Syrian effort to justify Jihad etc (this is a classic and awesome way to infuriate Marxists :-). We managed to push his buttons over and over again without him realizing that we were using him as a supplier for top notch entertainment :-). God, that was actually quite mean but I honestly think he will re-evaluate his Marxist world view after that night.

I’ve now ordered 50 ml, 99% pure liquid nicotine from a Chinese online supplier. 3-4 drops will be injected in hollow point rifle bullets, which will effectively turn it into a lethal chemical weapon. However, I am quite worried about any potential customs related issue as pure nicotine is considered an illegal substance. In a worst case scenario; a customs official will open the package, get a few drops on his skin and die, and I will have a full SWAT team serving me cock sandwiches at my door the next morning… However, I specifically instructed the Chinese supplier to send the package by courier to my company name, with extra wrapping and chemical labeling.

I have now made my first order for one of the chemicals required for my initiator from an online-based Polish supplier. I will have to order another 4-5 different ingredients online before I am done.

Needless to say; this is an extremely vulnerable phase. In fact, it is the most vulnerable phase of them all. If I get through this phase without trouble I will be very close to finalizing my operation. I am somewhat concerned but I have credible cover stories for each individual chemical (with the exception of one) should there be any complication.

It has been decided that the operation will be effectuated in Autumn, 2011. However, I cannot go into factors concerning why, at this point. My current funds are running low, and I have less than 15,000 Euro left with a 30,000 credit backup from my 10 different credit cards. My primary funds should cover all planned expenses without spending any of the credit.

So what do I do when I’m not working? I’m in the middle of another steroid cycle at the moment, training hard to exceed my 92 kg record from July. I’m currently at 90 kg and hope to reach at least 95 kg. Perhaps ill even reach 100 kg before I end the cycle in 4 week’s time! 🙂 I have a more or less perfect body at the moment and I’m as happy as I have ever been. My morale is at an all time high and I’m generally happy with how things are progressing. I may create an ideological Knights Templar Youtube movie this winter. I have some time to invest while I wait for my chemicals to arrive. My sister in Los Angeles invited me to spend Christmas with her, Kevin and my niece Kaia and nephew Tyler. I’m tempted to visit her for the fourth time but I don’t know if my budget will allow it. My sister supports the fundamental principles of the cause but she couldn’t care less about the struggle and politics in general. They are both career cynicisms and only really care about feeding their own egos. I understand that mentality though as I’ve been there myself. Still, such apathy is the root cause of both US and especially Western Europe’s problems.

I’ve been partying occasionally with my friends; Marius, Axel, Peter and a few others, since I came back from Prague. The cover story I used as justification towards everyone I know was that I was promoting my book.

I am happy to see that Axel is finally coming to his senses regarding his views on the Islamization of Europe. And I expect him to use his vote on the only anti-multiculturalist party during the election in a year’s time.

I am currently watching Dexter, the series about that forensic mass murderer. Quite hilarious. I’m also looking forward to watch the new movie-series about Carlos the Jackal (the Marxist-Islamist and Che wannabe scumbag). Hopefully, it will be as good as the Baader Meinhof Complex. I really enjoyed that one. Oh, and I’m also playing Fallout 3 – New Vegas atm after just finishing Bioshock 2. I’m also going to try the new World of Warcraft – Cataclysm when it is released in December. Time to dust off my image…

As for girlfriends; I do get the occasional lead, or the occasional girl making a move, especially now a day as I’m fit like hell and feel great. But I’m trying to avoid relationships as it would only complicate my plans and it may jeopardize my operation. And I don’t feel comfortable manipulating girls any more into one night stands. I am not that person any more. I did screw two girls in Prague though, but that was mainly because it was a realistic chance that I would end up dead during the process of establishing a weapons connection. I won’t make any effort to try to completely justify it though. Human males are imperfect by default as they are plagued by their biological needs. Nevertheless, screwing around outside of marriage is after all a relatively small sin compared to the huge amounts of grace I am about to generate with my martyrdom operation. And it is essential that you do what is required to keep moral and motivation at a high level; especially, just prior to operation critical moments. I have reserved 2000 Euro from my operations budget which I intend to spend on a high quality model escort girl 1 week prior to execution of the mission. I will probably arrange that just before or after I attend my final martyrs mass in Frogner Church. It will contribute to ease my mind as I imagine I will get tense and very nervous. It is easier to face death if you know you are biologically, mentally and spiritually at ease.

I received the 50 ml of 99% pure liquid nicotine shipment from China today. I’m relieved to see that there were no complications whatsoever.

I thought I’d add a little comment about general expenditure during the pre-operational phases. It is essential to maintain a low budget to conserve your limited budget. The importance of this cannot be stressed enough as having sufficient funds for the operation is everything! Approximately 4 years ago, in 2006, just before I started writing this compendium, I decided to move from my apartment in Frogner, one of the most priciest areas in Oslo, home to my mother. She accepted as she knew I would have to conserve my funds while I was writing the compendium. The cost of renting my old apartment was 1,250 Euro. My current accommodation expenditure (food included) is 450 Euro, a sum I transfer to my mother monthly for renting a room and for food. This wouldn’t have worked in my old life, when I was an egotistical career cynic as it would devastate my social image. However, individuals who choose to become a Justiciar Knight cares little about image (the pursuit to project a desirable façade to impress friends and potential mating partners). Sure, some people will think you are a freak for living with your parents at the age of 31 but this is irrelevant for a Justiciar Knight. The only thing that matters is to ensure that you have enough funds and free time to complete the objectives necessary to execute your individual mission. As for keeping secrecy while living with another person; sure, you need many cover stories and you need access to the loft and/or basement storage areas. As long as you ensure that there is no possibility that the person you are living with will find out what you are really working on, living with others shouldn’t pose a big problem until you initiate your manufacturing phase. My armor is dug down in the wilderness somewhere and I will soon dig down another pelican crate with my weapons, once I get them. I have a large Pelican chest in my room where I have secured items that might raise questions. Besides that, everything is on my PC and individual storage pins which I keep stored safe in the attic (they are 3 very small USB pins which are stored inside walls and properly concealed). They contain the required information for each of the coming phases. As soon as I have completed one phase I extract the information for the next phase from my pin, after I destroy my old hard drive. This has worked flawlessly so far. However, when I will start the actual manufacturing phase in a few months time, I will have no choice but to rent a cottage and/or small farm as I will require total anonymity while manufacturing and storing tons of materials.

I will not be able to update this log for a couple of months as I have to purge my old hard drive and store this information on a chip, externally. When this is done I will initiate the most critical of all phases; the “chemicals acquisition phase”. If I succeed with this phase I will have everything needed except the AN.

December, January and February 2011
When initiating the “chemical acquirement phase”, in end November/early December, I must admit I was filled with some angst. This was after all a critical phase, perhaps the most dangerous of all phases. If I messed this phase up, by being flagged, reported to the authorities etc. I would be neutralized before I could finalize my operation. Even when taking all possible precautions; I estimate it is a 30% chance of being reported to the system protectors at the national intelligence agency during this phase.

My concerns and angst relating to this phase impacted my motivation, to a point where I had to initiate specific counter-measures to reverse the loss of morale and motivation. I decided that the correct approach to reversing it was to initiate another DBOL steroid cycle and intensify my strength training. I also spent some time locating and downloading some new inspirational music. A lot of new vocal trance tracks and some inspirational music by Helene Bøksle. In addition; I decided I would allow myself to play the newly launched expansion: World of Warcraft – Cataclysm. The combination of these three counter measures, in addition to my 3 weekly indoctrination/ meditation walks, resulted in my morale and motivation again peaking.

I would now initiate the most critical of all phases; the “chemical acquirement phase” I will include a list of some of the items/components acquired during this period:

…

Continuation December log
As already mentioned; I initiated a second steroid test cycle: 3 first weeks on DBOL tabs (40 mg per day). Weight increased from 86 kg to 90 kg. No side effects. Cycle cancelled after three weeks because I felt I had to prioritize other tasks.

Pistol training November, December and January
Pistol training was initiated in order to fulfill the government requirement for purchase. 15 training sessions in November, December and January was completed and documented. The application for a Glock 17 was sent in mid January. Documentation and activity requirement was met. I joined my local pistol club back in 2005 for the first time but have only sporadically attended training until November 2010. The fact that I joined the club as early as 2005 was a planned move to increase my chances for obtaining a Glock, legally.

Rifle training December and January
3 rifle training sessions was completed during this period. The intention was to acquire a minimum of experience with, Gungnir, my semi automatic Ruger Mini 14, .223 caliber and to calibrate my Eotech sights properly at 100 meter distance.

December and January –
Rifle/gun accessories purchased –
10 x 30 round magazines –
.223 cal at 34 USD per mag. Had to buy through a smaller US supplier (who again ordered from other suppliers) as most suppliers have export limitations. An alternative supplier was located in Sweden but it would have cost 1.5 times more. Another possibility would have been to use Jetcarrier (or similar freight forwarder which allows you to order from a US address) but some companies have no- sale policies to New Jersey for this reason. Total cost: 550 USD

From Midway
– GG&G Picatinny Style Scope Base Ruger Mini-14, Ranch only: 95 Euro

– Aimshot Laser Sight and Flashlight Tri-Rail Barrel Mount: 30 Euro (3x picatinny/weaver rail)

– Allen Buttstock Shotshell Ammunition Carrier, 5 round Nylon (mounted on shotgun): 10 euro

– Loctite Blue Aluminum Threadlocker, cost 10 USD on Ebay, excellent for tightening screws on the alu rails used for fastening the holographic sight and 3 x sight.

From other suppliers
– LaserLyte Pistol Bayonet Quick Detachable – a picatinny/weaver rail bayonet purchased from Ebay using VISA/Paypal, cost: 62 USD.

– 4 x 30 round magazines for Glock 9mm from a national supplier, Capsicum Solutions, using VISA, cost: 230 Euro.

– Cammenga Easyloader for AR15/Mini14 from a national supplier, Capsicum solutions, cost: 70 Euro

– Hollow point ammo for .223 from a national supplier, 500 Euro. Had to research and use a cover when buying; bird hunting ftw.

– Slugs ammo for shotgun, 100 Euro, cover when buying; deer hunting ammo.

Equipment needed for creating chemical/biological ammo-

DREMEL Universal tool 200 series (the drill) –

DREMEL Workstation (used for stabilizing the drill in a stable 90 degree position) –

DREMEL Multichuck (allows you to use conventional drill bits on your dremel tool)
Total cost for these three items: 140 Euro from Pixmania.com

– 65mm Drill Press Vice (Quick Release) from Lathe Mill, ordered from Ebay via Paypal, cost: 33 USD (Anchortools.com). This item will hold the cartridge in place while I drill a portion of the lead core out of the bullet.

Note; I have concluded that .223 ammo is not suitable for creating bio rounds. The bullet simply lacks the size required to fit a deadly doze. 7.62 ammo would be preferable as it is more than double the size. 9 mm bullets are ok for this purpose, but I have to wait for my Glock license before I get access to 9 mm ammunition.

Other items bought from Clas Ohlson, general store:

– Manual filing set – Super glue, used for plugging the bullet after injection – De-isolation thong that lets you cut of the tip of bullets (looks like a wirecutter)

Other items ordered:

Marketing related
Casio EXZ 330 SR digital camera, for marketing purposes, from Expert, cost: 80 Euro. This would allow me to complete a photo session, without the need to use a professional photographer. I have used a professional in the past but it is obvious that the regalia I intend to use in the photo session will generate suspicion and threaten the security of the operation. Lack of professional digital equipment, green sheet background and other related and expensive photo gear can be compensated by my Photoshop skills.

Operational gear, components and accessories

– Latex tubing/surgical tubing 10” 1?4 1/32 wall latex tubing from Ebay 50 USD, used as the outer layer on a fuse to prevent early detonation.

– Ruger Mini 14 from national supplier, cost: 1100 Euro

– Trigger job on Ruger Mini 14, 100 Euro (bought in October I believe), to make the trigger lighter to press for rapid fire,

– Training ammo: 200 Euro – Barley Crusher MaltMill with 7 kg hopper, from barleycrusher.com, cost 250 USD incl shipping.

Received the Barley Crusher in January. I haven’t yet tested if it works but according to my calculation it should enable me pulverize fertilizer prills at record speed. When you attach a drill using a 3/8 drill motor at 500 RPM it should give you a crush rate of 3 kg per minute making the pulverization process of 2 tons of fertilizer fast and easy. The crusher rollers are adjustable at both ends so they can be adjusted according to prill size to ensure proper pulverization.

Fitness/muscle supplements

– 100% Whey Protein 9kg, cost: 250 Euro, for increasing muscle mass, 100 g per day in combination with training, top ranked protein supplement, short protein

– 100% Casein Protein 2 kg, cost: 70 Euro, for increasing muscle mass, 25 g per day before you go to bed in combination with training, top ranked protein supplement, long protein

– No-Xplode, cost: 50 Euro, pre-workout energy booster, this should also be used 10 min prior to mission

– Milk Thistle Herbal Supplement , 3 boxes, cost: 45 USD, Ebay, needed to strengthen the liver when using steroid tabs (Winstrol/DBOL). As steroid tabs are toxic for your liver you should use this liver supplement (3 tabs per day during a steroid cycle).

Logistic failures
I ordered an ASE Utra CQB-QM silencer (cost was 800 Euro) for my semi automatic rifle in September 2010 and the supplier, Intersport Bogstadveien, told me it would arrive in early January 2011. In January, the supplier told me ASE had suddenly cancelled all private orders due to the fact that they had just received a large military order… I’m not going to take the chance with a regular non-auto silencer because it might overheat and explode during rapid fire, with the risk of destroying Gungnir. I was not able to find another supplier of semi automatic silencers that could be sent to my country directly from the supplier or by jetcarrier. The only bonus I guess is that by eliminating the silencer aspect allows me to order and equip a bayonet instead. So I guess; “Marxist on a stick” will soon become an exclusive Knights Templar Europe trademark :D.

February
Initiated third steroid test cycle: 3 first weeks on winstrol tabs (40 mg per day) followed by 3 weeks of DBOL tabs (40 mg per day). Weight increased from 86 kg to 93 kg. No side effects. Cycle completed with great success. I have never in my life been more physically fit than I am today. Strength increased by 30-50% which will prove useful.

Creation of marketing movie trailer
Feb 15th to Feb 26th: created a 12.5 minute movie trailer (slideshow trailer) promoting the compendium: “2083 – A European Declaration of Independence”. All the slides were created in Photoshop. After 12 days of hard work I can say I am somewhat satisfied with the end result. I would love to make it even better but I really can’t afford to invest any more time into this trailer which might never see the light of day… Not happy with end resolution but higher res would just make the AVI file too large for efficient distribution. Was planning to hire a low cost Asian movie guy through scriptlance.com but I have to conserve my funds.

Other social related matters
After 5 years in the Freemasons I was finally accepted for rank 4-5 (it’s a combined rank). However, due to lack of time I decided to decline the offer. I told them I would be unavailable until Autumn 2011, due to extensive traveling.

Purchase of containers – primary, secondary and tertiary

To calculate the required size for cylinders (for primary, secondary, tertiary charge housings)

Google for an online Density Mass & Volume Calculator, like the following:
http://www.1728.com/density.htm

Mass: 12 gram (DDNP detonator content) You now need to find the volume and density Density: example density of water is 915 kg/m3 so density of the primer is approximately 700 Now, with the density and mass (700, 12) you can now calculate the volume

To calculate cylinder volume:
http://www.online-calculators.co.uk/volumetric/cylindervolume.php

With these calculations you now know the size of cylinder required for 12 gram primary, 500g secondary and 50 kg tertiary charge.

Cylinder housings purchased
Primary container (small, fits 12-20 grams) I bought the primary containers (detonator housing) from a general supply store. It was actually a long alu pipe which I intend to cut into three detonator housings. I also bought screws so that I may create lockable “ends” by using appropriate sized coins (placing two screws above and two below the coin. I was uncertain whether to select alu, copper or steel for the primary container but eventually decided to go with alu. Cost: 50 Euro Size: 10 x 1,6 cm (12g)

Secondary container (medium, fits 500-800 grams) I bought the secondary container (x 3) from IKEA, a metal toilet brush housing, the most expensive and robust alternative they had. I had reviewed various suppliers prior to concluding this transaction. Cost: 80 Euro. Size: 30 x 7 cm (692g), alternatively: 30 x 6,5 cm (597g)

Tertiary container (large, fits 50-60 kg) Ordered 3 x 61L barrels with a removable end cap(tertiary container) from a national supplier (Greif). Due to a minimum quantity policy I was allowed to leech on a main order placed by another company. After 3 weeks the order was ready for pickup. Cost: 90 Euro Size: 60 x 30 cm (52,8kg), alternatively: 75 x 45 (71,57 kg)

Fertilizer PP woven bags purchased
I was unable to find a supplier of this product in my country. I therefore ordered 60 units of large plastic bags able to contain 50 kg content (woven polypropylene, waterproof and robust fertilizer type bags, excellent for storage and transportation of chems). Chinese supplier found through Alibaba.com, cost: 50 USD for bags + 290 USD for EMS shipping courier. Paid by Western Union.

Cover story; I contacted 30 companies, a majority of them located in China and explained that I was planning to order 200 000 units per year with intent for distribution in Scandinavia. In this context I wanted to order 60 units for testing.

I don’t like lying, but I know from experience that you need a story like this if you want to prevent being ignored. These companies usually just ignore small purchases/inquiries.

I received the 60 units shortly after and they are optimal for their intended use.

Social life and continuation of cover
My best friends; Peter, 31, Marius, 31, Axel, 32, and Martin, 32, are now all in the process of settling down. Peter’s girlfriend Pia has a daughter, Mina, from another relationship. They are about to buy an apartment together. He’s currently in the process of selling his apartment close to Bogstadveien (not far from where I used to live), probably the best and most exclusive place to live as a bachelor in Oslo. Peter works as a co-captain on a supply ship outside the coast of southern US. He works 4 weeks on, and then has 4 weeks off etc. Although he and his parents fled from Soviet Hungary, they are unwilling to condemn the current cultural Marxist regime in Norway, possibly because they feel gratitude to the regime for welcoming them in the past. Peter loves to discuss politics but he’s not willing to take a clear stand on multiculturalism, possibly because he fears a future regime change, in our favor, may jeopardize his legal status. I have tried to convince him that it will not affect Christian Europeans, but he remains somewhat unconvinced. Regardless, he’s my closest friend and has been since I was 19. I have influenced him considerably the last few years, and vice versa, but I don’t consider him to be a fellow nationalist, as he doesn’t really care about anyone except the interests of himself, his family and his friends. This code, or rather lack of code, applies to the large majority of people though, so I don’t hold it against him.

Marius lives only 5 minutes away from my home. He’s been dating a very cute and nice girl named Christine for a couple of years now. She wants to settle down but he’s trying to delay it for as long as possible. He works as a fireman, quite ironic as I will soon ensure he gets his hands full… He has helped me out with my training regime as he is a die-hard fitness/bodybuilding person who has kept a very strict diet for several years. He’s a good friend (we’ve been “on-off” best friends since we were 11 years old – 21 years now)) and I often drop by his house. I guess Marius is the least ambitious of our group as he has traditionally focused all his energy on optimizing his physical and social image in relation to fitness for the purpose of hooking up with as many new girls as humanly possible, often at the same time. I think he has been with close to 1K atm including a Swedish midget :D. When it comes to partying, he’s a demi-god and I guess I can call him a master at what he does. His whole lifestyle revolves around having an optimal bad boy Playboy’ish image which includes multiple tattoos, perfectly toned muscles and endless partying etc. That lifestyle appeals’ to a lot of guys but few get to live it so fully. From my own experience, such a lifestyle does get very repetitive after a while though and you eventually just feel lonely and empty inside as everyone except yourself settles down. Regardless, he’s a great standup guy, and very fun to be around. Just ensure that you keep him at a miles distance away from your girlfriend when he’s drunk and it’s no problem at all :))

Axel works as a contract lawyer in the Norwegian Defense Department, quite ironically, with the acquisition of military equipment on behalf of the military forces pledged to defend the multiculturalist Kingdom of Norway. He’s currently the most career oriented of my friends. He and his girlfriend Synne has just purchased a new 650 000 Euro apartment. Everyone expects her to get pregnant soon as she is 35, he being 32. Axel is a really standup guy and is considerably more interested in high culture and discussing politics in general. Despite of the fact that he knows everything about the current Islamisation process and the indirect genocide of Europeans, he still says he supports “Venstre” (a multiculturalist party known for harsh demonization and vilification of cultural conservatives) but I now suspect he’s just saying that to tease me :))

Martin works for one of the more prestigious real estate brokers/developers in Oslo, Selvaag, and has just moved to Drammen with his girlfriend where they bought a house together, not long ago. She’s only 22 but has a son from another relationship. I haven’t seen Martin much the last few years as he has focused most of his energy on career advancement and his girlfriend.

Me, Peter, Marius and Axel (and a few other common friends) have seen a lot more of each other the last few months as I’ve had the opportunity to take some time off from the project. Traditionally, I have been the “glue/social administrator” of the gang, but in my absence, Peter has stepped up and has taken initiatives the last years. I still enjoy considerable respect and admiration from them in relation to my past achievements (establishing my company with 7 employees and making my first million at 24 and 4 million at 25-26). I believe, less than 5 self made individuals have accomplished more at that young age in my country. However, they just can’t comprehend why I halted my career at that point, which is understandable. It’s not like I can tell them that the only reason I generated those funds in the first place was to fund my current operation…

They, along with my sister Elisabeth, are constantly bugging me about getting a girlfriend as I’m the only one who is still single. I told them I will be dating again from August 2011, as I told them I will be moving to my own place then. I guess it’s the easiest way to avoid the social pressure. I also told them that I’m in the end phase of completing the research phase of 4 different business plans, one of which, I said, I will initiate from August. I’ve told them that one plan involves farming, one involves the design, creation and distribution of body armour with intent to become a supplier for the Norwegian Defense Department, one involves distribution of survival, gun accessories and other security related gear and I have also made hints about the mining project. Controlled distribution of information regarding these projects will potentially help me in the future, should one of them ever manage to stumble across sensitive information. Up until now, there has been absolutely no suspicion from them whatsoever as far as I can tell. I also told them that I’m in the end phase of my book project, which will be concluded by a final publishing tour visiting cultural conservative organizations in Western Europe followed by email distribution to 10 000 cultural conservatives around the European world.

I’ve also scheduled to meet my stepmom, Tove Øvermo, in March. She used to work as a director in Norwegian UDI (the foremost government organization tasked with approving applications and granting foreigners (mostly Muslims) legal permits). Ironically, UDI is a highly valued target for Knights Templar in Norway as it is an essential tool and facilitator for the Norwegian multiculturalist regime. However, I think she’s retired now, so she is currently not in danger of any KT attacks. Although I care for her a great deal, I wouldn’t hold it against the KT if she was executed during an attack against UDI, as she used to be a primary tool and category B traitor for the multiculturalist regime of Norway, high treason she should be familiar with. Tove, being very intelligent and committed in the advancement of her own career under the multiculturalist regime, is fully aware that she is a willing and participating subject/tool for the Multiculturalist Alliance in the indirect genocide of Norwegians through the continued Islamisation of Norway. People in her position are just unwilling to make any meaningful sacrifices as her career would be immediately terminated by the regime if she criticized them. Career termination followed by blacklisting and harsh vilification and character assassination is not a price most people of her position are willing to pay. Just like essential NS tools were guilty of facilitating the NSDAP, people in her position are guilty of facilitating the Multiculturalist Alliance. Regime sub-leaders such as her are on auto pilot though, and partly disconnected from reality and thus partly unaware of their own war crimes, since the multiculturalist media is ensuring that the public remain disconnected from reality and the truth. So when I meet her I will probably just end up talking about the usual social BS, to prevent raising any red flags. During our last meeting, I remember we discussed the central aspects of Wahhabism, and I was really impressed with her knowledge on the matter.

I have been storing three bottles of Château Kirwan 1979 (French red wine) which I purchased at an auction 10 years ago with the intention of enjoying them at a very special occasion. Considering the fact that my martyrdom operation draws ever closer I decided to bring one to enjoy with my extended family at our annual Christmas party in December. I brought the other flask to Marius` party a few days later and shared it with my friends. It was an absolutely exquisite experience that will not be forgotten. My thought was to save the last flask for my last martyrdom celebration and enjoy it with the two high class model whores I intend to rent prior to the mission. My interpretation of being a “Perfect Knight” does not and should not include celibacy, although some of my KT peers might disagree with me on this point. I believe that in order to strengthen the resolve, morale and motivation prior to a martyrdom operation, the Justiciar Knight should be encouraged to embrace and take advantage of a significant reward system designed to increase focus and remove any last doubts. A pragmatic approach, which involves acknowledging the primal aspects of man for the purpose of preparing him for a martyrdom operation, should always take precedence over misguided piety, which only increases the chance of jeopardizing the execution of the operation. And I believe the majority of war strategy analysts will agree with me on this.

Continued philosophizing about the future cultural conservative political model, when we, the cultural conservatives, again seize political and military power at one point between 2025-2083

I have been thinking about my post-operational situation, in case I survive a successful mission and live to stand a multiculturalist trial. When I wake up at the hospital, after surviving the gunshot wounds inflicted on me, I realize at least for me personally, I will be waking up to a world of shit, a living nightmare. Not only will all my friends and family detest me and call me a monster; the united global multiculturalist media will have their hands full figuring out multiple ways to character assassinate, vilify and demonize. They will possibly do everything they can to distort the truth about me, KT and our true objectives, and attempt to make even revolutionary conservatives detest me. They will label me as a racist, fascist, Nazi-monster as they usually do with everyone who opposes multiculturalism/cultural Marxism. However, since I manifest their worst nightmare (systematical and organized executions of multiculturalist traitors), they will probably just give me the full propaganda rape package and propagate the following accusations: pedophile, engaged in incest activities, homosexual, psycho, ADHD, thief, non-educated, inbred, maniac, insane, monster etc. I will be labeled as the biggest (Nazi-)monster ever witnessed since WW2.

I have an extremely strong psyche (stronger than anyone I have ever known) but I am seriously contemplating that it is perhaps biologically impossible to survive the mental, perhaps coupled with physical torture, I will be facing without completely breaking down on a psychological level. I guess I will have to wait and find out.

Regardless of the above cultural Marxist propaganda; I will always know that I am perhaps the biggest champion of cultural conservatism, Europe has ever witnessed since 1950. I am one of many destroyers of cultural Marxism and as such; a hero of Europe, a savior of our people and of European Christendom – by default. A perfect example which should be copied, applauded and celebrated. The Perfect Knight I have always strived to be. A Justiciar Knight is a destroyer of multiculturalism, and as such; a destroyer of evil and a bringer of light. I will know that I did everything I could to stop and reverse the European cultural and demographical genocide and end and reverse the Islamization of Europe.

I guess it is tempting for the many who have endured years of vilification, to just start believing the propaganda and embrace NS fully. However, I remain a staunch anti-Nazi and I blame NSDAP for the situation we are in. Hadn’t it been for the actions of the cultural right wing extremists known as the NSDAP our Western European countries would not be dominated by the cultural Marxist extremist regimes we witness today. If the NSDAP had been isolationistic instead of imperialistic(expansionist) and just deported the Jews (to a liberated and Muslim free Zion) instead of massacring them, the anti-European hate ideology known as multiculturalism would have never been institutionalized in Western Europe, because the Marxists would never have been so radicalized to begin with. The cultural conservatives would have been in a very strong and dominant situation today. Western European countries would have had cultural conservative doctrines similar to what we see in Japan and South Korea.

We must keep this lesson in mind. When we seize political and military power in the future; while tempting to unleash hell to avenge all our ravaged and dead brothers and sisters, we must keep in mind that replacing a cultural Marxist extremist regime with a cultural conservative extremist regime will only fail to break the cycle where history always repeats itself. So instead of replacing this tyrannical and extremist multiculturalist regime with an equivalent right wing one, we must think and act pragmatically with a long term objective. We must manage to break the historical “Marxist vs. Conservative” cycle or we risk that the cultural Marxists will emerge as a dominating force again after 20-100 years. As such, we should limit the executions of category A and B traitors to 200 000 in Western Europe. A better alternative than execution of the remaining, the category C traitors, would be to establish a large multiculturalist zone in southern/eastern Europe, perhaps Anatolia, or on other territories which has been invaded and occupied by Muslims. In these newly created zones; the cultural Marxists category C traitors and those of the non-Europeans considered as politically disloyal will be deported to and allowed to live and create their imaginary utopia. A cultural Marxist or a so called “internationalist” does not feel much love for his ancestral country as he believes we are all citizens in a global community. So they should recover easily from the process of being deported to another country.

Norwegian Intelligence Agency (PST) annual estimates – 2011
Feb 28th: The Norwegian Intelligence Agency (PST) just released its annual report on terror estimates in Norway. I have been waiting for this report for several weeks now. Apparently, it’s the same expectations as usual when it comes to Islamic terror; imminent danger. However, they then specify that the largest right wing threat in Norway is that a subsidiary of English Defense League (EDL); Norwegian Defense League (NDL) is in the process of gaining strength. They also state, between the lines, that both EDL and the NDL are dangerous and violent right wing extremists that adhere to racism, fascism and Nazism.

They conclude that they will ensure that any attempt to further develop NDL in Norway will be harshly suppressed.

I am not surprised that PST makes statements like this as the report has been designed by the Norwegian Labour Party, and does not reflect the views of actual PST operatives. The head of PST, Janne Kristiansen has never even worked as an intelligence officer, and is nothing more than a planted Labour Party agent, placed to lead the PST, against the will of most PST employees.

I know that the above description is nothing more than vile lies, a part of their psychological propaganda warfare against all cultural conservatives. I know this for a fact as I used to have more than 600 EDL members as Facebook friends and have spoken with tens of EDL members and leaders. In fact; I was one of the individuals who supplied them with processed ideological material (including rhetorical strategies) in the very beginning. The EDL are in fact anti-racist, anti-fascist and anti-Nazi. They even have many members and leaders with non-European background (African and Asian). They have worked so hard, and continue to work hard, to keep National Socialists out of the organization, but yet they are strategically labeled as racist-fascist-Nazi-monsters by the multiculturalist authorities. The EDL, although having noble intentions are in fact dangerously naïve. EDL and KT principles can never be reconciled as we are miles apart ideologically AND organizationally. The EDL even rejects taking a stand against multiculturalism which proves that they are even more naïve than Sarkozy, Merkel and Cameron who have all admitted that multiculturalism has been a failure and a disaster for Europe.

KT was formed back in 2002 as a revolutionary conservative movement because we had lost hope that the democratic framework can solve Europe’s current problems. The EDL, on the other hand, IS a democratic movement. They STILL believe that the democratic system can solve Britain’s problems… This is why the EDL harshly condemns any and all revolutionary conservative movements that employ terror as a tool, such as the KT. And this is why, we, the KT view the EDL as naïve fools, wasting all their energy monkey- screaming to deaf ears while they should instead have focused on means and methods that are meaningful in regards to achieving true political change, in regards to tearing down the multiculturalist regime known as Britain. Unfortunately, the only meaningful resistance at this point in time is to use military force. So instead of monkey-screaming, they should instead focus on strategically demolishing one of the many British nuclear power plants, which effectively would completely cripple the British economy, contributing to creating an optimal climate for significant political change.

Regardless; it is so obvious that the Multiculturalist Alliance feels it is important to label anyone who criticizes multiculturalism as racist, fascist, Nazi-monsters. It makes their job easier, as they can justify harsh suppression methods of all cultural conservatives. The truth of the matter is that the Multiculturalist Alliance and their tools are about to lose this propaganda war. The peoples of Western Europe are not stupid, and they know that less than half of the targets of character assassination are not what is claimed. I’m optimistic about the fact that the MA appears to have managed to paint themselves into a corner, and their false and desperate propaganda outbursts appears, for an increasing number of Europeans, to be stuck on auto pilot (similar to what was witnessed in the Soviet Union in the 70s and 80s). People are in the process of learning the truth about what is going on and the continued desperate propaganda outbursts only makes our job easier. It is not the cultural conservatives of Europe that are the monsters. It is in fact the Multiculturalist Alliance that are the true racist, fascist, Nazi-monsters. It is possible to avoid reality for up to several decades. The Soviet Union is proof of this. But eventually, the truth will be known as you cannot avoid the consequences of avoiding reality.

It is no longer a question IF the MA will crumble but WHEN the MA will crumble. They will lose when the Western European economy shatters, in combination with further Islamic colonization. And when this happens; the majority of the 340 000+ nationalist militants in Western Europe must be ready to strike hard and without mercy with the objective of seizing political and military power. We still have 14 years (2025) to arm ourselves, so let us continue to prepare for the coming coup d’état. Guns and ammo alone is not enough, you will need quality body armor, com/radio devices, rations and certain survival accessories as well. Chop-chop<3 For those of you who does not want to wait this long, should immediately ordinate yourself as a Justiciar Knight for the KT. Economic status (as of March 1st)
I decided to sell my dear Breitling Crosswind and my Montblanc Meisterstück pen in January in order to strengthen my operational budget. I was able to sell my Crosswind for 1800 Euro and my pen for 200 Euro.

My remaining budget is now:
In bank: 3750 Euro In cash: 3750 Euro Value of car: 4500 Euro Credit (9 credit cards): 28 750 Euro

Logistical plans ahead (as of March 1st)
I will shortly convert the public listing/definition of my company from regular to agricultural. This will allow me to acquire (rent) and register a farm with accompanying fields. The fields, registered through my company, will give me a specific “farming ID number” which is a requirement for ordering large amounts of fertilizer from the national supplier.

The cover I am using is; test production of sugar beet. I have created a 10 page “business plan” for this purpose, and have familiarized myself with the related terminology. As such, I am soon ready to place “rent adds” in agricultural newspapers, with intent to rent the farm/fields.

As soon as I rent the farm; I plan to move all my equipment to the farm house and initiate the “explosive manufacturing phase”. The operation will be executed shortly after the manufacturing phase is completed. Will attempt to initiate contact with cell 8b and 8c in late March.

Remaining items/components to buy:

• Plastic sheeting: 30 Euro

• Alu/wood ramp for loading/unloading truck: 30 Euro

• Fertilizer – large 500 kg bag: 1 x CAN, 1 x N34, 1 x 0-5-17 (for show), repeat after a couple of weeks: 2000 Euro

• Sementmixer – rent or buy: 100 Euro

• Ethanol 96%, x 6L: 30 Euro

• Blue Police – flashing LED light – for one of the trucks: 150 Euro

• Face – splash proof face mask: 30 Euro

• Fork jack – for 600 kg sacks: 200 Euro

• Plastic base for 600 kg sacks (used with above): 200 Euro

• Refrigerator: 100 Euro)

• Freezer: 100 Euro)

• Fume hood: 1,000 Euro, not yet decided

• Microballoons, 20 kg

• Glock 17: 700 Euro

• More ammo: 1,000 Euro

• Dunnage air-bag for transport load securing (centerload.com), bought from Ebay: 100 Euro

• Straps/net for securing large load in truck, may use alu/metal profiles with screws to support

Manufacturing of Picric Acid/DDNP
Foreword – why the manufacturing of picric acid as a secondary/booster and DDNP as a primary is the most rational approach:

As of 2011; the most popular primary explosive seems to be AP also referred to as Satan’s Mother. AP, although quite easy to manufacture, is an EXTREMELY dangerous substance which is likely to cause you great injury or even death. In the guides I have read about DDNP it is stated that this primary is very often disregarded since it is so difficult to make. This is deliberate misinformation as it is simply incorrect (If a chemistry amateur like myself can make Picric Acid AND DDNP on the first try then ANYONE can make it!!!). After merging 4 DDNP guides, I – who has no chemistry experience whatsoever, managed to synthesize DDNP on the first try. I tested the batch, and I confirmed the result myself. I even managed to create the first batch of DDNP with relatively impure picric acid. DDNP is more than 10 times as stable as AP and has more or less equal VOD (velocity of detonation). I even think that synthesizing DDNP was easier than manufacturing picric acid (which is considered to be perhaps the easiest secondary/booster to manufacture). In other words, the only reason you would not want to create DDNP as a primary is because you for some reason can’t get access to the materials required. So let’s review these materials and some of the equipment needed;

The following should be easy to acquire unless you’re called Abdullah Rashid Muhammad…:

Generic lab glassware
(EASILY OBTAINABLE): beakers, conical flasks, glass temperature rods etc.

Fume hood and fan
(EASILY OBTAINABLE): fume hood can easily be purchased or created using improvisation by using PVC plastic plates, screws, duct tape etc. You can use a 100 euro dust blower as a fan (I did and it worked perfectly).

Sulfuric acid
(EASILY OBTAINABLE): PA and DDNP – if you are having trouble buying this in bulk containers then simply buy 15 car batteries (new or used) which should contain approximately 2L of 28-37% sulfuric acid each. Just drill a hole in it (using protective gear) and pour it in a larger container. If you don’t need 1,5kg of PA booster and just want to create DDNP primary the required amount of sulfuric acid is less than 3L (which is boiled down to 1L of 90%+)!

Acetylsalicylic acid
(EASILY OBTAINABLE): PA – just buy aspirin at any drugstore. There are several brands of Acetylsalicylic acid (aspirin equivalents).

Sodium Nitrate
(MODERATELY OBTAINABLE): PA – you can order this at any drugstore as it is an essential substance for tanning/preserving meat. Hunters that needs to process hundreds of kilograms of meat before freezing it needs Sodium Nitrate (1 teaspoon for every 25kg of meat to prevent the growth of bacteria). You can also synthesize sodium nitrate quite easily (as long as you do it outdoors) by using ammonium nitrate (you get this from ice packs) and caustic soda (or was it acetone) if I remember correctly.

Sodium Nitrite
(MODERATELY OBTAINABLE): DDNP – you can order this at many drugstores as it is an essential substance for tanning/preserving meat. Hunters that needs to process hundreds of kilograms of meat before freezing it needs Sodium Nitrate (1 teaspoon for every 25kg of meat to prevent the growth of bacteria).

Sulfur powder
(EASILY OBTAINABLE): DDNP – you can easily acquire this from aquarium filters or by ordering online. It is an essential ingredient in Wiccan culture/religion so they can’t ban it for religious reasons.

Caustic Soda – powdered
(EASILY OBTAINABLE): DDNP – you can easily buy this over the desk in all countries.

Acetone – liquid
(EASILY OBTAINABLE): DDNP – you can easily buy this over the desk in all countries.

Ethanol (95%)
(EASILY OBTAINABLE): PA – you can easily buy this over the desk in all countries. Just buy concentrated sprinkler fluid (blue) used to clean windshields on cars. There are many names for the appropriate compound: isopropanol and butanol are other names. Go for ethanol or isopropanol if possible. I’m not sure about bio-ethanol sold at gas stations (from pumps) but that may work as well.

Detonator
(EASILY OBTAINABLE): there is no reason to make this more complicated than it has to be… by using mobile phone detonators etc. As DDNP is easily detonated by fuse; just order a few meters of regular visco fuse in December during the fireworks season. There are thousands of pyrotechnic enthusiasts doing this all over Europe and most of the shipments get through with little consequence if detected. Just order from a couple of suppliers so that you will get at least one of the shipments. You can also create your own fuses, in which case; just visit online pyrotechnic forums (every country has at least one) for instructions. When creating the detonator skeleton cylinder you can also add a couple of grams of gunpowder (the flaked gunpowder used in shotgun shells are good) layered above the DDNP in the detonator. For most fuses; 1 cm equals 1 second, so if you want 2 minutes delay just use 120 cm of fuse. Visco fuses are excellent for this purpose but there are even better ones at some sites.

General pyrowares:
much of the above can also be ordered online from pyro-chem sites. The best are located in Eastern Europe since regulations are less tight.

Conclusion:
there is absolutely NO GOOD REASON why anyone (unless flagged by the intelligence agency) shouldn’t be able to acquire the above materials and gear WITHOUT detection. The only thing that is holding you back is unfounded fear or laziness! Your fear for detection cannot be justified, unless you have an Islamic name <3 Ingredients needed for 1,5kg of Picric Acid secondary/booster

1. 10 liters of 90%+ sulfuric acid (requires 2 days of labour, cost: approx 200 euro)

2. 1.6 kg of Acetylsalicylic acid (requires 4 days + 2 days of labour, cost: approx 1500 euro)

3. 3 kg of Sodium Nitrate (pre-ordered at apothecary, 1 week delivery time, cost: approx 500 euro). This can also be synthesized relatively easily if you are having trouble buying it.

4. 80 liters of distilled water/distilled ice cubes (cost: approx 440 euro)

1.
10 liters of 90%+ sulfuric acid
Estimated time required: 1-3 days to purchase the product (28-37%) and it requires 2-3 days of labor to concentrate it to 90%+.

Boiling down 35 liters of un-concentrated sulfuric acid (28-37%) to 10 liters of 90%+ concentration

In order to concentrate sulfuric Acid bought from stores (containing 28-37%) you will have to boil down the liquid. In order to get 10 liters of 90%+ sulfuric acid you need approximately 30 liters containing 28-37%.

I bought a container of 25 liters (28%) from one supplier (supplies car shops etc) and I bought 5 bottles from 3 other retailers each containing 1 liter. I also bought 4 car batteries in case I needed more.

I was uncertain how I should approach the “boiling down process” at first. The guides I had reviewed suggested you use specialty hot-temperature porcelain plates, use of specialty lab beakers, use of cooking stones to prevent sprouting and to use all necessary protection gear. As such; I assumed you needed specialty cooking plates that could reach very high temperatures and that I would need boiling stones and specialty laboratory glassware that could sustain extreme temperatures. Needless to say; the guide was wrong on all accounts! You don’t need any of this to concentrate sulfuric acid! Not hot-temperature porcelain plates (any plates will do), not specialty lab beakers (any regular Duran lab beakers will do) and not boiling stones (I tried with boiling stones and it made it harder).

I initially bought 3 induction plates (flat porcelain) but they didn’t function as my 2L beakers didn’t cover the minimum diameter required for the induction plates to function. I used standard inexpensive lab beakers made from Duran glass btw. I also broke two other beakers made from Duran glass (crushed them to small pieces with a hammer under a towel) in order to use it as boiling stones (to prevent the liquid from sprouting).

As the induction plates didn’t work for me I purchased 2 regular single cooking plates; the more expensive ones with iron plates retailing for 140 euro a piece. I had a very cheap single plate from before. Using the boiling stones was a failure for me so I reduced the amount of stones until I decided to remove them all and try without. I was also unsure how to store the concentrated sulfuric acid once I was done boiling. Some sources said glass was required while other said you needed specialty plastic. This was incorrect, as I stored my 90-95% acid in regular plastic bottles, in both 1 liter bottles (the bottles which were intended for 28% sulfuric acid) and 4 liter bottles (bottles produced for distilled water). I encountered absolutely no problems doing this whatsoever ( I had them in these bottles for up to 6 weeks).

Boiling procedure
I did the boiling outside using a 10 meter electrical extension cord and I placed the cooking plate on a wooden TV rack I had carried outside. I wore a lab coat with apron with standard nitril washing-up gloves and a 3M half mask with 3M acid filter (nr. 60923 – multifilter). Skipping the stones made wonders and it quickly started boiling (set it on the highest temperature from the start). After 1,5 hours of boiling (concentration at about 70-80%) the more or less unnoticeable water damp developed into thick smoke (NOx gas). After around 2 hours of boiling the smoke was so thick I got really worried that my neighbors would notice it so I quickly cut the power. Even after turning it of it generated insane amounts of white smoke (NOx gas) for 20 more minutes. I then decided I had to do the rest during nighttime, not to attract any attention.

That night, I started the next boiling session with 3 boiling plates at around 21:30 since it got dark at 23:00 when the heavy smoke would begin to generate. I started with 1.8L of un-concentrated sulfuric acid in each of my 2 x 2L beakers and 600ml in my 1 x 1L beaker which was used on my “weaker” plate. I worked from 21:30 to 07:00 in the morning for three consecutive days before I finally was done. End note: I tried to extend the working day past 07:00 on day two which almost ended in disaster. At around 09:00 AM, I was about to put on my hazmat suit and 3M gas mask to start another boiling session when I noticed the neighbor just outside the house entrance. Had I not noticed this in time I would have to explain to him why I was wearing the protective gear, and that wouldn’t end well… So if possible, even when on an isolated farm; do the boiling between 23:00-07:00 if possible. No use taking unnecessary risks. I spent 5-6 days on this process considering the fact that I had to combat false information, misconceptions and work out efficient procedures . If I had access to this guide before I started I would have been able to shorten down this process to 2 days.

Additional boiling tips:

a. Consider buying 5 or even 6 single cooking plates to reduce the boiling time drastically. Cutting the boiling time in two will drastically reduce your vulnerability to detection considering the fact that you are forced to work outdoors.

b. You will quickly learn your “progress” (purity level of sulfuric acid) by evaluating the thickness of the smoke and how many ML has been boiled away. If you start at 1.8L of 28% purity just boil it until it reaches 550ml or so to be sure you have 90%+.

c. Unless you are using identical cooking plates you will want to adjust the amount of ML per cooking plate so that you have maximum uptime and so that the concentration reaches 90% on all plates at the exact same time. You will learn this after the first session.

d. Let the acid stand for 30-40 minutes after you cut power to the plates by unplugging the electrical cord extender.

e. You can store 90-95% sulfuric acid in plastic bottles.

f. Concentrated sulfuric acid does not fume or evaporate.

g. You don’t need to go overboard with protection. It will take 10-20 seconds for 90%+ sulfuric acid to burn through regular nitril gloves (medium thickness washing-up-gloves) and several seconds for it to burn through clothing. Just be rested and careful and you’ll be fine. I got several drops on my gloves on several occasions and I just wiped it off with a napkin (napkin quickly turns black) before it could burn through. Avoid the “one-time-use” super thin gloves, even if its nitril. The most important things to wear are regular nitril gloves, an apron and some kind of full face visor. 3M masks are excellent since they prevent fogging on the visor.

2.
1,6 kg of Acetylsalicylic acid
Purifying the aspirin to pure acetylsalicylic acid. All the guides I reviewed, around 8, had flawed or even dysfunctional methods. I had to locate an entirely different method from YouTube which proved to work excellently.

Estimated time required: 4 days to purchase the product in a secure manner (assuming each apothecary has a 2 box cap). You would need to set up an “apothecary route” visiting 20-30 apothecaries in one day, then wait 1-2 weeks for safety and repeat 3 more times the next 4-8 weeks. As soon as you have all the aspirin it will require 10 minutes to pulverize it with a regular stationary or handheld blender and approximately 2 days to synthesize.

Other reagents needed: distilled water, mineral and distilled ice cubes: around 40-50 liters

You will need purified aspirin equivalent to 2.5kg of aspirin tabs/270 boxes of 20 tabs (mostly containing 440mg (producer: Nycomed, brand name: Globoid) but about 1/6th was a different brand containing 500mg tabs (producer: Bayer, brand name: Aspirin). You will be synthesizing 1.6 kg or more of pure acetylsalicylic acid from 2.5 kg of impure aspirin tablets. The reason you need to purify the aspirin is to remove the 17% of so called “fillers”, stark etc. The maximum yield of pure acetylsalicylic acid you can extract from aspirin is 83%, if I remember correctly. I managed to extract aprox 67% (1.68kg out of 2.5kg) which is a good yield. It’s worth noting that all the guides I could locate online were either incorrect or significantly flawed. All the guides I read failed to inform me that if you heat the aspirin to more than 70ºC it will destroy the acetyl and convert it to salicylic acid which is worthless for our purpose.

Of course, I had to learn it the hard way and managed to create a lot of worthless goo… Fortunately, I eventually managed to locate a method that worked optimally and I only ruined the first batch.

a. Grinding the aspirin;
some retarded guides suggested I use a mortar and pestle… Needless to say, after a few hours, my wrists hurt like hell, and I realized this was an extremely poor method for the quantities I was working with. There must be a better way? I ended up experimenting and I found a very nice method. I put out a large plastic sheet on the floor and poured approx 1000 tabs on it, spreading it evenly. I then used a 20kg dumbbell (single hand weight used for weight training) and crushed the tabs with even strokes by using gravity. It took me less than 4 hours to crush all the tabs. In retrospect I realize that using a blender would be even better. Providing you use a blender (I prefer stationary, but I guess handheld works as well) which assures a good and even spread/circulation as you grind them (same principle as when grinding AN prills) it should only take you 10 minutes to grind up 2.5kg of aspirin tabs. It’s worth buying several brands of blenders to find out which offers the best circulation. Basically; only 1 out of 5 blenders offers appropriate circulation. Handheld blenders are probably the exception here since your motion determine the circulation, providing you grind it in an appropriately shaped container. With circulation I mean that as the lower part of the tabs get ground to fine dust, the heavy pieces of the tabs rise to the top until they are “sucked” down the “downward whirling current” – providing optimal grinding. I bought a total of 8 different blenders and only 2 of them worked efficiently for this purpose (at least for AN prill grinding). When completed; you now have 2.5kg of fine aspirin powder.

b. Manufacturing method

• 2.5kg of aspirin powder

• 5L of 95% ethanol (you can use the concentrated blue ethanol used for cleaning the windshield of cars for example, other types of alcohol works as well like isopropanol or butanol)

• Distilled water, distilled ice cubes: 40-50L
You will need 1ml of 95% ethanol for every tablet. This means that for 50g of aspirin (114 tabs x 440mg) you will need 114ml ethanol. Since you have larger quantities of materials you should use higher ratios as an effective way to save time:

I used the following ratios when manufacturing (these ratios are optimal!):

• 1040ml ethanol (I used primarily Isopropanol, 80-95% concentrated blue sprinkler fluid)

• 400g aspirin powder

• 6L distilled ice water

Alcohol note: I believe I used 95% concentrated sprinkler fluid: ethanol-Isopropanol (the liquid used for cleaning car windshields) but it might have been lower grade (80%?). I can’t know for sure since it wasn’t specified on the bottle. I performed a fire test and it burned, that’s all I know… 😛 I also made a batch with butanol (concentrated red spirits used as a fuel for some apparatuses). Since this batch was successful as well, I assume a large range of alcohols will do the job. However, I have read that methanol is not suitable.

1. In a 2L beaker, heat up 1040ml of 95% ethanol on a hot plate stirrer. Drop a spin bar in the beaker and start mixing in 400g of acetylsalicylic acid powder, under stirring, f example as the temperature reaches 50ºC. Very important; keep the heat between 60-70ºC. Do NOT let the heat surpass 70ºC as it will start to break down the acetyl and convert the compound into salicylic acid, which is useless for our purpose! The acetylsalicylic acid should be dissolved within 5-10 minutes if it is powdered, 10 more minutes if it is clumped, and up to 45 minutes if you are using whole tablets.

2. Filter hot, for regular gravity filtration you should use 4-6 funnels with 1-2 coffee filters in each (I used 1 but you should probably use 2) over f example 4-6 x 600ml beakers. Wash the 2L beaker with a small amount of ethanol and pour it through the filter to collect any residues. Then you may wash the filter 1-2 times with a small amount of ethanol to collect any residues. The compound left in the filter will be the aspirin fillers. Discard the filters and its content.

3. As you now have approximately 1.4L of ethanol-acetylsalicylic acid in your 2L beaker; pour 350ml into 4 x 2L beakers.

4. Place the first 2L beaker with hot 350ml of ethanol-acetylsalicylic acid mix into an ice bath. As an ice bath container; you may for example use a regular 10 liter plastic bucket (a 2L beaker fits this type of bucket perfectly with enough space for ice) filled with 0.5 liter of cold spring water and 3-4 plastic-pocket-sheets of distilled ice-cubes. You must use a weight of some sort to keep the 2L beaker submerged in the ice-water mix or it will float to the surface and fail to properly chill. You must now measure out approximately 5 times the volume of your ethanol-acid mix in ice cold distilled water that you cooled earlier. So for 350ml you will need 1750ml of distilled ice-water (very important; ensure that the distilled water is as cold as possible or you will not achieve maximum yield!). Add the ice cold water to the ice cold ethanol mix. This should more or less completely fill up your 2L beaker. The addition of the distilled ice-water will cause the acetylsalicylic acid to precipitate as it is insoluble in ice cold water.

5. Now filter the white slurry by gravity filtration using 6-10 funnels/filters/ 500ml beakers. You will obtain a white slurry-like compound in the filters. Remove the filters and its content, by wrapping them (so that the contents doesn’t fall out) and temporarily store them in a large plastic box. Empty the beakers (just pour the liquid in the sink) and get ready to repeat this process as soon as possible with your 3 other 2L beakers filled with 350ml of hot ethanol-acid mix. Try to complete the batch while the ethanol-acid mix is still hot as it might impact the yield if the hot ethanol-acid mix is allowed to chill to room temperature. I used more than an hour from start until I completed the last beaker and I didn’t notice any difference regarding the end result though.

Note:

• If you follow the above “aggressive” manufacturing method you should be able to complete all the batches (1.68kg total) within one single day of laboring.

• I managed to achieve a 67% yield (1.68 kg out of 2.5kg aspirin) because I was a bit sloppy when chilling the ethanol-acid mix (did not use weight to keep container submerged, and I could probably have chilled the ice water even more). If it hadn’t been for that I would have managed to increase my yield.

• The guide further suggest that you purify the acetylsalicylic acid a second time. I did not purify the acetylsalicylic acid. I do not know how this would impact PA production. Will the picric acid yield achieved be lower or even significantly lower if the acetylsalicylic acid isn’t purified a second time?

• Alternatively; you may use vacuum filtration for speed if you have the equipment.

Source:
http://www.youtube.com/watch?v=xHg1hx7Rf64

This method – further discussed:

Q1: Can you use cheap 70% isopropanol or methanol?

A: The extra water in 70% IPA would reduce the solubility of ASA and increase the amount of water required to precipitate most of the ASA. As for methanol, you have a lower BP and higher vapor pressure to deal with. You have to prevent loss of solvent (round bottom flask + condenser) and deal with the fire hazard (methanol is significantly more flammable, vapors even more so; and the flames in a well lit lab aren’t visible).

A: I used the 70% IPA and it worked fine. Just used a little more distilled water…

A: You don’t want to use too much alcohol otherwise you will dissolve other impurities such as triacetin. The ratio mentioned is the best ratio that has worked for me.

Q2: Is there any way to check if what I got is ASA?

A: An absolute way to test would be using FTIR spectroscopy or NMR spec. which may tell you what else is in the precipitate. If you want to test *only* for the ASA/SA in the precipitate, you could add sodium carbonate (CO2 = positive for ASA or SA), test melting point, etc. The easiest way though would be to add some metal cation that would selectively precipitate the ASA such as Cu+2, Ni+2

c. Gathering and drying
I chose to store wrap up the coffee filters containing the wet acetylsalicylic acid in a large plastic container until I was ready to process it.

I placed the filled filter papers on a super absorbent rag 5 times to get out most of the water. Afterwards I gently squeezed another rag on top of the papers absorbing even more liquid. I then used a plastic board, opened the seaming on the coffee filters and flattened them out like a pancake scraping off the content using a rubber scraper (the item used to evenly distribute cream on cakes is optimal).

After I had scraped out all the acid from the filter papers I spread the substance out evenly on the plastic board and placed the board in a room with an oven set to max. The temperature rose to around 30 degrees in the room. The day after much of the water had evaporated. I then semi ground the acid clumps and again spread it out evenly. After three to four days the acid was completely dry. Note: I’m not sure whether this is optimal way of drying as it takes several days for the acid to dry this way.

It would probably be a better idea to dry the acid in a large glass Pyrex dish in the oven at around 50-70ºC. 1.6kg would be too much for one dish so you would in this case have to divide it into 400g batches. However; I do not know for sure how this will impact acid, which is why I chose the hard way. It is definitely worth testing though as you will save several days drying it in the oven versus my other method.

You now have 1.6kg of acetylsalicylic acid and you have just completed the second most tedious task of PA manufacturing.

3.
Sodium nitrate
Sodium nitrate can be purchased from specialty chem stores, online or at an apothecary. It is commonly used to prevent bacteria growth in meat so many hunters buy it to prepare meat before freezing. Half a teaspoon is mixed with salt and other herbs and rubbed into 25kg of moose meat for example.

Alternatively; you may synthesize sodium nitrate relatively easily. However, I will not add the guide for this manufacturing method here.

4.
Distilled water
Always use distilled water when preparing and manufacturing acetylsalicylic acid and picric acid. You may buy it in car-stores as it is used as battery water. I ended up buying a total of 170L for creating 1.5kg of picric acid.

Practical tips – preparing large quantities of ice cubes: acquire a big freezer where you can store a lot of distilled ice (you fill the plastic “pocket sheets” with distilled water and squeeze the frozen cubes out of the plastic as your need arises). I converted 40-50L of distilled water into ice cubes this way (took me about 10 hours) and I filled up a large freezer for this purpose. You can only prepare smaller batches of ice cubes at a time though as you can only stack 2 layers of plastic ice- cube sheets at a time. Then you will need to wait 30-60 mins for it to freeze or the weight of the water will cause leakage in the lower levels of ice cube sheets. I also prepared ice cubes made from spring water. Just mark the plastic sheets of mineralized water with a large black X, from a permanent marker, on each side, prior to filling, so you know which sheet contains distilled and which contains mineralized water.

Producing Picric Acid
Now that you have prepared 1.6kg of acetylsalicylic acid and 9-10L of 90%+ sulfuric acid you are halfway into manufacturing picric acid.

See guide
I used the following measurement for creating PA. I had a negatively disproportionate amount of sulfuric acid so I used a little more acetylsalicylic acid and sodium nitrate.

In a 1L conical flask I heated 600ml (700 is optimal) of 90%+ sulfuric acid in a 1L conical flask up to 60ºC. I then, over the next 2-4 minutes mixed in 112g of acetylsalicylic acid under stirring (using a hotplate magnetic stirrer). I then turned off the heat as the nitration would ensure enough heating.

I then started the nitration process (adding 190g of sodium nitrate slowly the next 140 minutes. I added 0.3g each 15 seconds for a total of 1.2g per second making sure to keep the temperature between 60-70ºC. I kept the temperature at around 66ºC to be precisely. Keeping the temperature stable at around this heat is essential. After about an hour I had to turn up the stirring power to max as the liquid thickened.

After 140 minutes the solution was fully saturated (even though I had 24g of sodium nitrate left) and it “bloomed”. Blooming is like a reversed melting process in which the solution solidifies and no amount of stirring can stop it. I do not know for sure if this is correct as I have never seen a guide describing it. Regardless, I kept on stirring every 5 minutes for the next 30 minutes, and then every 10 minutes for the next 30 minutes to prevent the increasingly “growing” substance from overflowing. This was one of my “successful” batches which contained approximately 40-50% pure PA crystals. 80% of my batches “bloomed” in this manner. It took around 4-5 hours for the container with the unpurified PA to reach room temperature. The 1L conical flask was 800ml full. At this point, I could continue the process by slowly scraping out 400 ml of semi-clumps of PA into a 2L beaker with 500ml of distilled water and the rest distilled ice cubes (filled up to 1400 ml). After proper precipitation I poured it into 6 x 500ml beakers with the same amount of funnels/filter papers, saving the filtrate and pouring out the liquid into a 100L plastic bucket (which was later to be dumped near a death-sentenced-bush, outside 🙂

Corrections to previous guide based on my own experiences and research while producing 10 batches of unpurified PA. When I first started this production process I assumed I would end up with a relatively pure end product, perhaps 70-80% pure after washing a couple of times. Needless to say; it was significantly more time consuming than I thought and I had to learn the hard way due to significantly lacking and even misleading guides. The positive surprise though, was that handling PA was significantly safer than I thought. I started out as overly careful as regards to PA and metal. Although you have to be careful, know that PA is perhaps the most safe booster you can work with. Unpurified PA isn’t, in most cases, even flammable. So you don’t need an exceptional fume hood and fan. An improvised version will work just as well for this purpose. After I had bought a fume hood I invested in two fans, one cheap version (it was actually just a dust collector suction fan) retailing for 140 euro. I also invested in a much more expensive fan (especially manufactured to prevent explosion) retailing for 950 euro. It would seem I was way too paranoid as the only dangerous gas you ever need to worry about when manufacturing PA or DDNP is the NOx gas during nitration and also H2S and SO2 during DDNP manufacture when acidifying the sodium picramate solution but these gasses aren’t explosive at all. I was somehow worried that the anti-metallic nature of PA would prevent me from using a metallic fan-tube. However, using one is not a problem at all as all the PA remains in the beakers. So don’t worry at all about explosive gasses cause there aren’t any. And you don’t need a hazmat suit either. Just use regular nitril washing-up-gloves and a good 3M face mask with visor and acid filter/vapor gas filter (nr. 60923 – multifilter) and you’re more than fine.

A few guides states: after you mix in the acetylsalicylic acid with the 90%+ pure sulfuric acid, slowly mix in the sodium nitrite. A few guides did not even specify in more detail than this.

1. What many guides failed to mention and which I had to learn the hard way after ruining several batches; it is ESSENTIAL that you do the nitration (mix in the sodium nitrite) between 60-70ºC. I found out that if you mix in the sodium nitrite below 60ºC some of it turns into a layer at the bottom of the conical flask which grows ever thicker. This layer can potentially sabotage and ruin your whole batch. If the temperature suddenly rises this layer may suddenly “melt/loosen” and cause a nitration “overdose” as it mixes with the rest of the content which may increase the temperature with up to 20ºC within minutes and severely deteriorate the yield of the batch. This layer may also affect the magnetic stir bar and cause it to not stir properly. So make sure you prevent this from happening by keeping the temperature around 65ºC and never let it drop below 60ºC.

2. What ALL the guides failed to mention was the fact that the addition of the sodium nitrate increases the temperature of the content. So basically; as you start the nitration just after you add the acetylsalicylic acid at around 50-60ºC, you don’t need any heat at all during the process as you can keep the heat between 60-70ºC by adding sodium nitrite (or potassium nitrate). Rapid heat fluctuations is the most severe threat to your batch and temperatures above 70ºC (not exactly sure about 70ºC perhaps 75ºC) will deteriorate your batch and cause a significantly lower yield. By deteriorating I mean lowering your yield of pure PA crystals from an optimal 50% down to 10% in a worst case scenario.

3. What all except one guide failed to mention was the importance of the glassware you are using. I used 2 x 1L beakers and 1 x 1L conical flask. All of my beaker batches ended up with a very low yield for the following reason; the magnetic stir bar works significantly better in a conical flask. I had problems in the beaker as the stirring was significantly reduces (even at max power) due to the shape of the container and the fact that I had a glass temperature rod which very presence significantly reduced the stirring output created by the stir bar. In any case; use a conical flask instead of a beaker if possible.

4. On my most successful batch I used a 1L conical flask with 600ml of sulfuric acid (90-95%). On average; I added 1.2g of sodium nitrate per minute (for my two most successful batches). Instead of dropping 1.2g in one go each 60 sec, I added aprox 0.3g every 15 sec (in other words 4 times x 0.3g per minute). I sat there for 2 hours and 15 minutes doing that on my most successful batch (with 2 x 5 minute breaks). You can imagine the agony of sitting there with a 3M gas mask on a rotten chair with your back hurting adding 0.3g every 15 sec. Its repetitive, extremely boring and frustrating. You will start to curse the fact that you didn’t set up a TV nearby, or the fact that you only bought one hot plate stirrer instead of three. The prospect of doing this 10 times can be psychologically challenging. So take all measures to make your time more efficient. I managed to barely survive with my sanity intact thanks to my iPod <3 5. Acquire 3 x hot plate stirrers if possible. The nitration process is an extremely tedious and frustrating process. With three hot plate stirrers you can add 0.3g in three separate conical flasks speeding up this bitch of a task 300%. A hot plate stirrer retails for 300-500 euro so its affordable. Also, it's less suspicious to buy 1 than 3 🙂 as three mostly indicates that you are going to resell them <3 6. Creating PA proved to be a very unforgiving manufacturing method. Several things can go wrong, and most of these things relate to impatience -> too much sodium added per minute -> temperature rising to fast f example; I took a break a couple of mins too long and came back to see the thermostat at 59ºC. I tried to compensate with a little extra sodium nitrite, which didn’t seem to have any effect on the temp. I added more and suddenly the temperature exploded and ended at 81ºC. A couple of other times I got too impatient and added too much per minute (although at the time I believed that a temperature above 70ºC wouldn’t make a difference – I eventually learned that it makes all the difference). You need to be rested and focused before you begin this process (I was exhausted on several occasions which made me lose focus a few times and thus ruin the batch). As long as you focus and add the sodium nitrite 2-4 times per minute x 0.2-0.4g you should be fine.

Prepare mentally for the nitration process. Don’t start if you are physically tired or if you need to eat any time soon. Just prepare and if possible have a radio, TV or iPod at your disposal.

7. Don’t assume that the precipitate you end up with will be above 60% purity. Consider the precipitate you end up with grapes, whereas the actual pure PA crystals are the seeds in the grapes. If you do the process flawlessly the seeds will be large, but if you make mistakes, they will be significantly smaller. This will save you the disappointment I encountered:-). Out of 1.2kg of unpurified PA substance I ended up with only 200-300g of pure PA crystals. Had I done everything optimally I would have ended up with 1.5kg of unpurified PA substance and perhaps 0.8-1kg of pure PA crystals.

8. You can mix in the acetylsalicylic acid quickly. I never spent more than 5 minutes mixing it in, in the beginning of the process. As soon as you have mixed it in and it has fully dissolved you can start the nitration process. I usually mixed it in at around 60ºC and started the nitration process at around 60-65ºC.

Washing
It says in most guides that you need to wash with ice cold water 2-10 times. Basically, if you want to do this; just pour water over the filter to clean away sulfates. However, as you need to purify your yellow PA substance anyway, it is pointless to wash it! As I didn’t know this at that time I washed the PA-substance 2 times, and the batch intended to create DDNP; 4 times.

How to find out whether your yellow unpurified PA substance is pure

Fire test:
Purified (<80%) PA burns, unpurified PA (>60%) does not! I would imagine it would burn faster and more consistent the purer it is. I tried the fire test on all my batches of un-purified PA substance and none ignited, not even my best batch, even though I heated it until completely dry in the oven. I would therefore assume that you need a certain % of pureness for the substance to ignite – perhaps 50-60%+

Eyesight:
I found this out myself by observation of substance and comparing to the yield achieved by the purification process. The more pure your PA substance is the more it will “sparkle”. It is the pure PA crystals that make it sparkle. Needless to say; the more crystals, the more sparkles. Usually, an optimal produced batch of unpurified PA substance is pale yellow that “sparkles”. It’s worth noting though that one of my pale yellow batches had a very low yield so color isn’t everything and 100g of pale yellow PA substance can in fact prove to yield less than 20% of pure PA crystals.

IMPORTANT: DO NOT assume that your unpurified PA substance is suitable as a high explosive booster! On my test blast I used 3g DDNP with 50g unpurified PA substance as a booster. At this point in time I believed it was potent but wanted to test for sure. Needless to say, the completely dry impure PA substance did not detonate and was just spread all over after the blast. I later (when I purified the rest of the same batch) found out the yield in that batch was a lousy 10%, so no wonder it didn’t detonate.

Purification
Time required: 3-4 days for 1.5kg of unpurified PA substance.

Purification of the yellow unpurified PA substance is required as you need to be sure that the substance is potent. You will need approximately 40-50 liter of distilled water to purify 1kg of unpurified PA substance. You also need a 2L beaker for boiling/mixing and 20-40 other glass containers for chilling the liquid after the boiling/mixing. The chilling process will take up to 1-2 days so unless you have enough time, you should get A LOT of glass containers, to do everything in 1-2 batches.

Boil up 1.3 L of distilled water (70-80ºC) in a 2 L beaker. You don’t need a hotplate-magnetic stirrer for this as a limited amount of stirring is needed. In fact a regular plate would go considerably faster since it heats up faster.

Start to dump in the unpurified yellow PA powder (powdered or clumps – around 50 g, exact weight isn’t important). If the amount doesn’t saturate the liquid you can put more in, until it is no longer soluble and bits of PA floats around. Just ensure everything dissolved before you go to the next step. Have a container of 500 ml additional water nearby and add it once you need to dissolve the insoluble PA. You can regulate the temperature somewhat with adding additional water to ensure the temp doesn’t exceed 80ºC. I don’t know for sure whether temps exceeding 80ºC will deteriorate the PA but I read from another source to keep temp between 70-80ºC so no harm following that advice. It said another place to remove the brown oil droplets. I tried this in the beginning with a plastic spoon but noticed that it impacted the yield of pure PA as I also removed some pure PA floating around with the droplets. I only noticed the brown droplets in my first batch which was very poorly made, but not in the other batches. There will hardly be any so just ignore this altogether.

1 L of liquid is saturated with 15 g of pure PA so this fact allows you to measure the yield of your yellow PA powder and the number of grams you can expect to purify. 50g of yellow PA powder in my case yielded from 10-50% of pure PA crystals. My poorest yield was my first batch. 300 g of PA powder was almost inert and yielded only 30g of pure PA crystals. The other batches of PA powder was a better yield ranging from 15-50%.

When the liquid is saturated (you should have 1.8L of PA liquid), filter hot into glass containers. Filtering hot is not very important unless your PA powder is very unclean, like my batches (it was everything from bugs to other small impurities like pieces of plastic). I filtered 1.8 L into 4 x 500 ml beakers but since I only had 10 of these beakers I eventually started using all types of glassware. Since the crystals (when cooling slowly) “grow” slowly like bacteria I assumed using items which they use to boost bacteria growth would work in these cases as well. I experimented with various glass containers, different shapes and sizes. I used flat, long (long drink glasses), small, with everything from glass rods and plastic sucking straws in.

My findings were not 100% conclusive, in fact I’m still very uncertain, but I got the impression that certain shapes and sizes will allow for a greater yield. Smaller containers seemed better than large containers and adding plastic sucking straws so the crystals got more “surfaces” to grow from was a slight bonus. Beakers larger than 600ml yielded a lower result. I ended up buying 18 long drink glasses (each 300ml) which yielded an ok result. I was surprised to learn that the best yield was from a large circular glass bowl (5 liters) which I placed 1 liter of liquid in. It was an unclean bowl I had previously used to store my bananas in (in a plastic bag). In any case; the yield of pure PA crystals was 100-200% better than in other containers. I do not exactly know why; perhaps it was the dust particles in the bowl or possibly bacteria that promoted the increased growth. In any case; it indicates that the described purification method is flawed and the issue is worth investigating further. For obvious reasons, I don’t have time for more research into this issue. Also keep in mind that larger glass containers uses considerably longer to cool (several extra hours).

Cool the two 600 ml beakers to room temp. For a 500 ml beaker this took 4.5 hours and a few hours extra for the 2L beakers. I notices, however, that when I let the beakers sit overnight (for a total of 12 hours) there was considerably more PA crystals generated. However, I do not know for sure if this will impact the total of crystals generated after you have further cooled it down in the fridge. When the beakers and other glassware you might have used are at room temp (don’t hesitate to let it stand for several extra hours, perhaps up to a day or two, after it has hit room temp) – then, put the beakers in the fridge. It said in another guide that I was to put it in the fridge for one hour but I’m pretty sure he meant that I chill the liquid down to 4ºC. Considering that I was purifying 1kg of unpurified PA powder and I had A LOT of beakers and other glass containers, it took 12 hours in the fridge for the beakers to reach 4ºC (since the room temped containers raised the refrigerator temperature from 4ºC to 12ºC within the first hour…:-) So, if you have a small fridge, like I did, consider chilling the containers in a “transit location”, if possible, in order to shorten the “fridge time”. I used the cellar floor which holds 8ºC. This saved me a total of 36 hours of “fridge time”. Filter once the liquid hits 4-5ºC (perhaps we can even increase generation rate if we let stand even longer. I am really not sure about this but it is worth investigating further.

The other guide said: scoop the crystals out of the filter. However, I like to save the crystals in the filter until I have a large enough batch to process as it maintains the moisture well and keeps it cool. I also like to process the filter papers all at once by using a 2m x 1m plastic board. I open the “seam” on the coffee filter papers and flatten it out like a pancake. Then I use a plastic/rubber spoon like object (the item used to smear cream on cakes) to get all of the content out.

Storage
When you have taken out all the crystals from the filters, put them in a plastic box and keep them with at least 20% water content (no problem if you take them out of the moist filters – newly moist filters = approx 100% water content).

These should be used within 2-3 weeks or they may start to deteriorate and/or may increase sensitivity and thus become more dangerous to transport (according to another guide). If you store them saturated with alcohol in a sealed glass container, you can basically store them safely for 100 years +.put in oven for an hour.

Drying before use
Dry in oven for 30 mins to 4 hours based on water content between 50-80ºC before use. I dried the unpurified PA substance in the oven (no problem) but haven’t yet confirmed with pure PA crystals. It should be safe because I dried DDNP in the oven the same way, which should be considerably more sensitive.

Preparing 1,800kg of AN prills (CAN 27-0-0)
There are large 300-600L diesel tanks in most farms (for fueling the tractor) so just call the supply company and order the required amount of diesel. My 300L tank was almost half full so I ordered an additional 150L this way. I also bought 5 x 20L gas tanks to transport the diesel from the equipment building (where the diesel tank was) to the barn cellar (where I was going to manufacture the ANFO). Since a 20L plastic tank is too heavy to handle efficiently I poured the content into 5 x 4L plastic bottles which I had leftover from all the distilled water used previously.

When you make the order at your local farming supplier (the supplier near the farm you are renting) you should order twice as many “dummy fertilizer). Obviously, before you can make an order in the first place you need to register a “farming company” and acquire a “producing number” from your government. In other words, you have to register as an “official farmer” or you will not be able to make an order from the farming supplier. You should also have enough farming land to justify the order you are placing. 50-90 decares (5-9 hectares) should allow you to easily justify the purchase of 4-5 tons of fertilizer whereas half being CAN 27-0-0. If you do not take these precautions there is a chance you may not pass the scrutiny of the farming supplier as red flags will arise. Also. f example when you order 3 x 600kg bags of CAN27 you should also order at least 3 x bags of the two other types of fertilizer. I ordered 5 x 600kg bags of CAN27 and 5 x of 600kg “dummy bags” which proved to be too much for one person to process.

I then told the office to place the CAN inside of the equipment building and the rest outside. The supply truck uses a “hook” that can place the bag in a 3m radius of the truck. The positive thing about this is that I could close the building sliding door (3 x 3m) and further process the AN without anyone outside noticing.

I then brought 14 x 50kg fertilizer bags (previously ordered from a Chinese company, the bag has two layers, a carry layer and an inner plastic bag that prevents moisture getting in or out) and filled up the bags, transporting them to the barn basement by car (the barn basement is 100m away from the equipment building). When I had emptied 3 x 600kg bags I had around 36 x 50kg bags which I had transferred to the barn basement. Don’t worry about water absorption at this point as the prills have a layer that prevents the prills from absorbing liquid.

I bought several different blenders (both stationary and handheld) and found a suitable machine, which I bought 8 of. This blender, a stationary Electrolux machine with an ice crushing function offered optimal circulation of ground material vs. prills which allowed me to grind 1kg every 30 seconds. I set up 4 of these blenders 5cm from each other on a work bench with an empty 50kg fertilizer bag next to a bag filled with 45kg of AN prills (placed just below the 4 blenders so you can empty the blender glass containers quickly and pour it into the empty bag). You fill up each blender and put it on the lowest strength grinding (you don’t really need more grinding power than this and higher power will most likely wear out the blenders considerably faster). I made a nice rotation ensuring that the uptime of the 4 blenders. I then prepared 12 x 4L containers of diesel close by. Although ANFO requires 7% diesel for optimal detonation you should add 10% or perhaps even 13% like I did to account for any evaporation etc.

As you crush the prills to fine powder it will immediately start to absorb water from the air, so as soon as you have ground a portion you must hurry to pour the content in the empty bag. Once I had filled up 1/4 of the bag I added 1.7L of diesel, before continuing. You add approximately 1.7L at as you fill up the bag with 1/4, 2/4, 3/4 and 4/4. When completed I wrapped the inner bag (like the way you make a pig tail on hair) and closed it with 10 cm of duct tape. Then continuing to wrap, I left 2 cm of empty space before doing the same again. I then bent the upper wrapping down on the lower wrapping and closed it with more duct tape. I then wrapped the outer bag with two portions of 20cm duct tape. I don’t know for sure if this is optimal, but I couldn’t think of a more efficient way to seal the bag properly. After I had grinding 600kg of prills the first blender broke down (the knife handle broke). The second machine broke down shortly after. I replaced these with the backup blenders and continued until I was done preparing 34 bags x 50kg ANFO. By that Time 3 blenders had completely broken down and one more was partly dysfunctional.

Time required to prepare 1 x 50kg bag of ANFO using the above method
It took around 30-40 minutes to prepare each 50kg bag of ANFO. So I spent around 3-4 nights (from 23.00 to 8.00) working this way until I was completely done. I chose to work at nighttime because I wanted to do everything I could to prevent detection. I covered the windows and closed the door on the inside (I had to install a closing mechanism on the door). Due to the loud noise made from the 4 blenders you can’t really hear anyone approaching so I wrote a note on the door of the main building which encouraged them to call my mobile if they needed my presence (add a smiley <3). This work is very tedious so I had my iPod on for most of the time at max volume. I took a 5 minute break for every 2 bags I completed (so basically every 120 minutes). Occasionally, I would have to drive to the equipment building and fill up my 20L diesel containers. I originally planned to process 2 more 600kg bags of AN prills but I was so exhausted that I decided 1800kg would have to do. Mixing in aluminium powder and micro balloons in the ANFO
Adding 10% (by weight) of aluminium powder and 2-3% (by weight) of micro balloons will increase the sensitivity and power of your ANFO substantially. Considering the fact that we do not have access to 34-0-0 (much purer AN) I assumed adding at least the micro balloons would be required to ensure detonation.

Considering the fact that AN powder will absorb water so quickly I concluded that it would be appropriate to add the AL and MB after I had saturated the AN powder with diesel.

You now have around 36 x 50kg bags packed with ANFO

Adding aluminium powder and micro balloons
Commercial ANFO contains approximately 2-3% of micro balloons according to a couple of sources, which makes the ANFO more sensitive and thus requires only a standard blasting cap to detonate. However, commercial ANFO is much purer than the 27-0-0 CAN available to farmers.

I’m now going to mix in the AL and MB using:

45kg of ANFO 5kg of AL (I’m using 400 mesh(62 microns) leafed AL 1,2kg of micro balloons

For a total of 51.2kg per bag

The 150kg of AL came in 4 hermetically sealed drums each containing around 37kg of AL. After reading the “security precautions”, however, I was completely freaked out. The drum openings where wielded with a soft metallic substance so it was not going to be easy to open them without extreme risk (I thought). According to the warnings; contact with oxygen will risk detonation of the AL, contact with metal, concrete and even plastic will significantly increase the chance of static electricity which can cause a detonation. Friction and shock can also cause detonation. Close proximity of oxidizers (gas, diesel) or close proximity to electrical outputs etc can cause detonation.

At first, I thought I would manage to create enough picric acid booster material (1.5kg in total) to disregard the addition of AL powder. But considering the fact that I only managed to produce 200- 300g of booster I had no choice than to continue the AL addition.

I first planned on creating an outdoor mechanism that allowed me to thrust a steel spear like object, by using gravity, creating a 3 cm hole in the top of the drum. However, I ended up taking a regular knife and starting to file down the wielded enclosure, even if it involved high risk. Eventually, I manage to file open the enclosure. I then considered putting the drum upside down in one of my empty fertilizer bags to prevent the presence of an abundance of oxygen.

This method proved to be too exhausting since I had to hold up the 37kg drum with my hands. I ended up with putting a large 3 x 4m plastic sheet on the concrete floor and carefully pouring the AL powder out of the opening. Small clouds of dust began to generate but nothing happened. I carefully continued until the drum was empty rolling the side of the drum in a circular pattern from the center of the AL powder already poured out, until the drum was empty. There were small clouds of AL powder generated but the biggest one was approx 20 cm in diameter, which settled down after a while. I continued after the small clouds had settled. It’s also worth noting that I had closed all the windows of the cellar basement so the humidity was relatively high, while oxygen level was below average.

In any case, this method worked well and I had gathered all the AL powder on the sheet, and thus preparing it for the addition to the ANFO.

I plan to mix up 1.2kg of micro balloons per 45kg ANFO. I have a total of 40kg of MB in 5 large bags. It is a powder-like substance and inert. But according to the sources; when mixed with ANFO or ANALFO it will generate hot spots and thus making the ANFO or ANALFO more sensitive. I just hope I have the correct type of micro balloons… I assumed that the micro balloons were 2 mm in diameter but these seems to be 0.2 mm or so.

Are you there God? it’s me Anders. The impersonal diary of Oslo Bomber and Mass murderer Anders Behring Breivik.

Posted on July 25, 2011 by NMT

So there’s a Mexican vigilante drug ring declared itself a law-keeping fraternity of the Knights Templar, now the Oslo gunman/bomber claims accreditation. The “2083” manifesto which Anders Behring Breivik released through a carefully harvested email list includes a curious diary/progress log, including this passage after a technical setback on day 42:
“I prayed for the first time in a very long time today. I explained to God that unless he wanted the Marxist-Islamic alliance and the certain Islamic takeover of Europe to completely annihilate European Christendom within the next hundred years he must ensure that the warriors fighting for the preservation of European Christendom prevail.”

That’s about as much as God, spirituality, or conscience make an appearance. Breivik’s candid musings share the desensitized voice of his favorite TV show. And he may be the first real serial killer to use emoticons.

I think that Breivik’s affable, sometimes self-deprecating, mostly aggrandizing voice comes straight out of DEXTER, obviously not by chance his favorite show. Though the television character means to depict a loner, there’s a discordant charm which Breivik, probably like a typical Dexter fan, doesn’t have any idea is a horribly ironic incongruity.

Most relevant perhaps is that Breivik is a veteran of the occupation of Iraq. You wonder if Norway will now think hard about its role in the continuing occupation. Maybe sending its mercenary-mentality personalities to sow their oats in a war zone contaminates more than their young men’s consciences.

Breivik’s favorite computer game, a first person shooter, involves racially-variated combatants.

What the media is calling Breivik’s “manifesto” is mostly copy-and-pasted information he gathered from the net: the history of the Knights Templar and lots of how-to for aspiring allies. We’ve bypassed the explosives how-to to present the account of his day to day travails, including this gem, Day 70:

it is hard work for one person and I am really beginning to understand why Mr. McVeigh limited his manufacturing to 600kg. He probably encountered much of the issues I did and he probably had to learn everything the hard way just as I have done.

However psychologists will choose to describe him, Breivik isn’t stupid, or religious. We’ve annotated this excerpt by highlighting some of the cultural supplements with which Breivik was augmenting his diet, with intentional consequences and perhaps not.

April – 2011
On April 6th I leased a car (short term lease), from AVIS; a silver grey Fiat Doblo van with 735kg of carrying capacity. They would charge my credit card with 810 euro per month. I needed this car as I had an introduction meeting with a farm owner the next day. I removed all the AVIS insignias so the car would pass as my own.

I had previously made initial contact with the owner of an appropriate farm through an online real estate forum for farms etc. At this point in time I had regularly searched for farms with 30-100 decare of farmland the past 6 months and had around 10 potential leads, all within 4.5 hours driving from the capitol [Oslo].

I had an introduction meeting with the owner, Petter and his girlfriend Tonje, around April 7th. They were around 37 years old and it turned out Petter was renting out the farm for the next 2.5 years due to the fact that he was going to jail for the specified period. He was reluctant to state exactly what he was being incarcerated for but he mentioned something about renting the place to someone who had used it as a marijuana farm. So I assumed that he was somehow implicated. I presented myself in an optimal way and it paid off; the couple seemed to love me, considering me to be the ideal candidate. It is times like these that your acquired experience/competence in sales will pay off. A good salesperson is also a very talented psycho-analyst. So it’s all about identifying the persons pains/problems/worries and saying what the individual wants to hear.

I wanted to move in as fast as possible, for example from April 1st, but as he was scheduled to leave for prison on April 19th and Tonje wanted to live there until May 1st, this wasn’t a possibility. Petter came to Oslo on April 10th and we signed the contract. I was now significantly closer to initiating the manufacturing phase…!

At this point in time I lived with my mom, in order to conserve as much of my funds as possible.

On April 9th, I was inflicted with a virus by my mother and I came down with something that later appeared to be a very resilient throat infection. FFS, this is what happens when you live with people hanging out with hypochondriacs…! It was the third time she had infected me the last two years and I was very pissed off and frustrated. The manufacturing phase was SO close, in only 20 days and now I’m potentially neutralized for the next three weeks… I decided to ride the illness out as I thought it would pass within the week, but it proved to be very resilient. My energy levels dropped by more than 50% and I eventually ended up with an antibiotics treatment.

It was now April 25th and I was finally back to normal. I had spent the past couple of weeks playing through Dragon Age II and a couple of other newly released games. Awesome! The good news was also that I would be practically immune to any bacterias and viruses for the next 3 months, in the most critical of all phases, as my immunity system had been boosted and rejuvenated significantly by the virus. My training regime had suffered and I had lost a couple of kilograms of muscle mass but most if not all other practical things were now in place for the manufacturing phase.

On April 27th I made the order for the fertilizer which were to be delivered a week later. Prior to making this order I had officially registered my company as an agricultural entity, with emphasis on the growing of specific crops, and I had gotten my official production number (a farming number) allowing me to make orders from the national farming supplier. If they were to screen me they would see that my company was linked to a farm that had 90 decares of fertile land so all was well.

The last week in the capital I spent a lot of time with friends, partying and attending various social events. I knew that it would be the last chance, for a very long time, I would enjoy their presence.

I had somewhat of a liquidity problem though, as I had to transfer a deposit equivalent to three months rent – 3,750 euro in addition to the rent for May; 1,250 euro.

This payment ate up a great deal of my remaining liquidity so I would shortly solely rely on my 10 credit cards with a total of 29,000 credit… As the weekly cap on all credit cards are capped at around 800 euro, I started withdrawal of funds from 3 cards.

Events on the farm from May 2nd 2011 to June 23rd 2011

This log contains a lot of what can appear as “wining” but it serves to reflect my mental state during the stay, a relatively detailed log of events and how I overcame the obstacles that arose. It can also serve as an educational guide or a blueprint for which the goal is to create a more efficient time budget. Learning from other people’s mistakes is always preferable to making them all yourself. It should be possible to drastically reduce the time spent on preparation, assembly and manufacturing based on the experiences shared in this log.

Monday May 2 – Day 1:
I drove up to the farm (2-2.5 hours from the capitol) with my newly leased Fiat Doblo with all the equipment and gear/clothing I needed. I spent most of the day moving and getting my equipment and gear into place.

Tuesday May 3 – Day 2:
I built the fume hood from the PVC plates and screws that was enclosed in the box. It was like an IKEA set and after a few hours I had completed it. Despite of the suppliers assurances they had forgotten to include the 10 cm diameter plastic fume hood tube so I wasn’t able to plug in the dust collector fan. I placed the hood on a regular 50 cm wooden living room table. I placed the 25kg heavy fan on a 1.5 meter high shoe shelf that I just flipped over. I placed it next to one of the living room windows so that I could cut out a plastic sheet using the same measurements as the window. I opened up one of the windows and taped the plastic sheet with duct tape on the window frame and cut a 10cm diameter hole where the tube was supposed to come out. This is the optimal way of doing it as you won’t have to cut in the wall or other surfaces.I would have to pick up a bendable vent tube tomorrow. I also covered the rest of the windows with curtains to block anyone trying to peek through. The fume hood was a very simple construction so if I had more time I would probably just build one myself and save 500 euro in the process.

Wednesday May 4 – Day 3:
Finished creating the metal skeletons for the blast devices and completing other practical issues relating to gear and equipment.

Thursday May 5 – Day 4:
I started to grind the aspirin tablets today, at first using a mortar and pestle. After a few hours my hands hurt and I realized this method wasn’t going to work out for this quantity. I decided I wanted to try an untraditional method by pouring the tabs on a large plastic sheet on the floor, using gravity to crush them with my 20kg dumbbell. This method worked excellently and I was done in about 4 hours. Tonje, the owners girlfriend, called me that evening. Apparently she was taking a 2 week vacation to Gabon and she was leaving this Monday. What a blessing! She said she would come and pick up some equipment from their storage room in the barn once she came back. I reckon I can manage to complete everything within the next two weeks, providing I work hard and efficient!

Friday May 6 – Day 5:
Started to synthesize acetylsalicylic acid from aspirin. Failed badly and ended up with converting the acetylsalicylic acid to worthless salicylic acid goo (at this point in time I didn’t know it was salicylic acid but It seemed very difficult to dry the substance). The guide I was using was significantly lacking. I realized I didn’t have any other contingency plan and I began to somewhat panic. As I was unable to find any solution online the next two hours I began to lose heart. As I had discarded my digital library of explosives guides I tried to locate guides, searching online with anonymizer software, for a completely different booster compound. As I realized that this task could take a week or maybe two my motivation and morale at plummeted. If I couldn’t even synthesize the first phase of the easiest booster how on earth would I manage to synthesize DDNP?! My world crashed that day and I tried to develop an alternative plan. I went to a restaurant in the northern town that evening and enjoyed a three course meal. I later watched a few episodes of “the Shield”.

Saturday May 7 – Day 6:
The only rational approach to this problem is to search online until I find a proper guide to synthesize aspirin powder into pure acetylsalicylic acid. After several hours of research my findings were extremely discouraging. All the guides I had found; mainly university level chemistry projects, required a suction filter pump and a chemistry air dryer. The even more discouraging news was that even with this equipment none of the university students managed to get a better yield than 30%! Omfg, this would mean that even with the equipment I would never acquire, my total yield would not surpass 30% which would severely cripple the overall plan… I went to another restaurant that evening (I find it an effective method for getting my morale up) to create a new plan. In any case; I appear to be fundamentally fucked If I cannot manage to find a solution soon.

Sunday May 8 – Day 7:
Failure is not an option for me. I continued my search on methods for the purification of salicylic acid online. After many hours of searching the net, using various search phrases, I managed to locate a single YouTube clip, with very few hits, which explained in detail an unconventional method for synthesizing acetylsalicylic acid from aspirin. However, the guy was using a suction filter pump and a laboratory air dryer but I figured I could bypass this requirement by using more funnel filters and by using an air drying method. According to the guy on the movie, he managed to achieve a 70-80% yield! This method seemed to be viable and I would try to create a batch the next day.

Monday May 9 – Day 8:
I tried the unconventional method for synthesizing acetylsalicylic acid with a promising result. I couldn’t actually confirm that the product I had was in fact purified acetylsalicylic acid so should I take a chance and manufacture it all using this method? Considering the fact that I had wasted so much time, I decided that I had no other choice than to initiate mass production even though I risked ruining all my aspirin. Because if I were to wait for a small batch, It would simply take too long, so I had no other choice than to take this calculated risk.

Tuesday May 10 – Day 9:
Considering the fact that I had wasted so many days and literally been at a standstill I felt a sudden need to create an evacuation plan as I didn’t have any. What would I do if the owner’s wife caught me, or the neighbor or anyone else? I needed to work out a plan for this potential scenario. The evacuation plan involved a 10 minute evacuation. I would have to pack my largest backpack with survival gear and related equipment, including survival rations, 10L of water, weapons, ammo and suitable clothing. I started to prepare the above.

Wednesday May 11 – Day 10:
I completed packing an evacuation kit. I felt a lot more safe and prepared for any emergency once I was done. When I returned from the southern town later that day, I saw two military 12 man teams, armed to the teeth, just 2,000m south of my farm. The largest military base in the country is located just a few kilometers north-east of my farm and their territory extends almost all the way down to my property. They have notified all their neighbors, me included, that they are conducting a large military training session as to prepare a new division of soldiers for the war against the Taliban and al-Qaida in Afghanistan. It’s quite ironic being situated practically on top of the largest military base in the country. It would have saved me a lot of hassle if I could just “borrow” a cup of sugar and 3kg of C4 from my dear neighbor 🙂

Thursday May 12 – Day 11:
As the acetylsalicylic acid purification and the rest of the picric acid production required a substantial amount of mineral and distilled ice cubes I spent the whole day converting water to ice cubes; a total of 50L converted whereas 20% of it was from mineral water. I ended up completely filling up a very large freezer with ice-cube-plastic-pocket-sheets.

Friday May 13 – Day 12:
As the acid manufacturing went too slow I bought more funnels at the local store, to up the production rate. I continued to synthesize acetylsalicylic acid from aspirin that day.

Saturday May 14 – Day 13:
I continued to synthesize acetylsalicylic acid from aspirin.

It’s the Eurovision finale today. I just love Eurovision…! 🙂 It’s a lot of crap music but I think it’s a great show all in all. I’ve seen all the semi finals and will take the time of to watch it later today, online. My country has a crap, politically correct contribution as always. An asylum seeker from Kenya, performing a bongo song, very representative of Europe and my country… In any case; I hope Germany wins!

Sunday May 15 – Day 14:
At the last batch of preparing pure acetylsalicylic acid my hot plate stirrer broke down. The magnetic mechanism stopped working. Fuck, Chinese piece of shit equipment, I should have rather paid more to get good European quality machinery…! What should I do now? Creating picric acid and DDNP without a magnetic hotplate stirrer would be very labor intensive and difficult and ordering a new product from a national supplier would take at least two weeks… I really don’t have much choice in the matter. I’m ordering a new plate today and I can focus on the non-chemistry tasks until I receive it.

I managed to completed to synthesize the last batch of acetylsalicylic acid from aspirin without my hot plate stirrer. I now had to dry it. After scraping out all the content from the filter papers I spread the content evenly on several plastic boards. At first I put the boards in normal room temperature, but as this proved to be a very slow method I ended up placing the boards in a small room with a oven at maximum temperature (around 30ªC). In retrospect I realize I would have saved several days by just drying the purified acetylsalicylic acid in a Pyrex dish in the oven at 50-70ªC, but even now I am not sure what effect heat above 30ªC would have on the acid. I am 70% certain it would be the optimal method though as this oven method works (confirmed) on drying both PA and DDNP.

Monday May 16 – Day 15:
Mixing up and further drying all the acetylsalicylic acid on the plastic boards.

Tuesday May 17 – Day 16:
Since I cannot continue on the chemistry phase, due to the lack of a hot plate stirrer, I started boiling my sulfuric acid outside. I initially bought 3 specialty induction plates (flat porcelain) but they didn’t function as my 2L beakers didn’t cover the minimum diameter required for the induction plates to function. I began with one hot plate and created boiling stones by crushing a few small lab beakers. The boiling stones only made the boiling more difficult and complicated so ended up without the use of boiling stones.

Wednesday May 18 – Day 17:
Continued boiling, now with three regular plates for maximum efficiency. Boiled after dark as the smoke generated as the acid surpassed 70% was so thick and compact that it would surely alert neighbors even several miles away.

Thursday May 19 – Day 18:
Wanted to set on a plate, boiling sulfuric acid, while I did some shopping in the northern town. I noticed someone lurking outside the door and saw the neighbor. There was a BMW in the upper barn area he was going to fix up for the owner. As I was about to go outside in full protective suit, he almost saw me before I saw him. I helped him push out the car and gave him the gasoline required to drive it to his place. I’m going to stick to nighttime boiling from now on to reduce my exposure to any unwanted surprises. I was very lucky today, something I cannot take for granted in the future.

It’s essential to create as much goodwill you can from the neighbors. Use any opportunity to generate goodwill from them. This goodwill will be returned indirectly by them not probing and investigating. If you get a visit from neighbors, be polite and friendly, offer them sandwiches and coffee, unless it will jeopardize the operation. The goodwill generated is likely to be to your benefit later on.

Friday May 20 – Day 19:
Finished boiling sulfuric acid

Saturday May 21 – Day 20:
Went to the capital to pick up a few parcels; 5 large packages of micro balloons and 50 more liters of distilled water. I also purchased a 50kg weight dumbbell set for fertilizer grinding, costing 700 euro, as it would most likely be the best way to crush the fertilizer prills using this method.

On my way home to the farm I noticed what I believed to be a civilian police vehicle south of the southern town (30km from the farm). At this point in time I remembered I had forgotten to turn on the lights on the car since I tested out my blue LED lights the day before. Hmm, they should have stopped me for this violation. Very weird. As I came closer to the farm I noticed what I believed to be another civilian police car. Damn, I got a really bad feeling about this and my instincts told me I was about to be apprehended. Too many red flags were lit. I stopped 500 meters before the farm entrance and had a smoke, preparing mentally for a potential welcoming party at the farm. What should I do if I was about to be SWAT raped by a 6 or 12 man team? I didn’t have any weapons available as they were all inside the main house. Should I make a run for it, if so, where would I go? Would I have time to fetch my evacuation kit, and should I try to get it and shoot my way out?

After the break I approached the farm, and turned on the fog lights on the car so that I could have an advantage should they approach me from the front. I stopped 50 meters north of the main house and I was shocked at the sight that awaited me…! The barn door was wide open!!! Someone was here! They were probably circling me right now or waiting for me inside the main house! I waited 20 minutes with the fog light aimed straight at the direction I expected them to come from. Perhaps they are not here, maybe they just installed monitoring equipment like they often do? I entered the house, picked up the glock and searched the house and the barn. Nothing. I began searching for monitoring equipment, nothing…

Paranoia can be a good thing, or it can be a curse. The barn door had probably been opened by the wind. I decided then and there that I would not allow paranoia to get the best of me again. If they were to come for me one day, there was really nothing I could do about it, so it would not be constructive to worry about it.

Sunday May 22 – Day 21:
Started relocation of fertilizer. Broke down a 600kg bag into 13-14 x 50kg bags, loaded in the truck, drove 100 meters and carried them with a “carry trolley” into the barn. Did a full 600kg bag. Was exhausted.

Monday May 23 – Day 22:
Initiated the fertilizer grinding phase. I was unsure whether I had to pulverize the fertilizer or not. Most guides said it was a positive thing as some fertilizer prills are coated with an anti-absorbing layer. I crushing a small batch, placed it in a plastic bag and soaking it in diesel, I also prepared another small bag of prills and soaked that in fuel to see whether it would absorb any liquid. Updated log

Tuesday May 24 – Day 23:
The prills had not absorbed any diesel at all, during the last 24 hours, so I concluded that the only approach is to pulverize the 5 x 600 bags of 27-0-0 AN fertilizer. I cleaned the concrete floor in the barn thoroughly and poured 50kg of fertilizer prills on it, spreading it evenly so that I could roll the 50kg dumbbell back and forth to crush it, and then use a broom and spade to gather up the pulverized AN before it had absorbed a lot of moisture from the air. I was sure that this method would work as I managed to semi-crush the prills with my 20kg dumbbell. If a 20kg dumbbell almost could do it, then surely, a 50kg dumbbell would ensure excellent grinding. I estimated that I could grind 50kg within 20 minutes, 3 times faster than any other method I had heard of.

To my great disappointment, crushing the prills with the dumbbell failed miserably. The prills were only partially crushed and rolling the dumbbell proved to be an especially labor intensive experience. Also, the crushed prills absorbed moisture much faster than anticipated so the time required for me to crush 50kg (2 hours) would result in more or less AN powder fully saturated with water moisture… Fuck, why can’t anything go as planned???? And the dumbbell set cost me a total of 750 euro and now it has proven to be worthless… What do I do now?

Wednesday May 25 – Day 24:
As this was a big setback, I decided to seek comfort and attempting to erect my morale, which was currently in the toilet, at the restaurant in the northern town, ordering a three course meal while readjusting the plan. I had previously heard of a Marxist terrorist traitor in the early 70s. I believe he was called Baader or could it have been Meinhof, terror prostitutes for the Soviets and loyal dhimmi whores of the Islamic Ummah. Anyway; I remember reading about him using electrical mixers to crush AN prills in his apartment. Apparently, he had purchases several crates of these mixers and used several simultaneously for efficiency. I’m going to test this out shortly. If electrical mixers/blenders from the 70s could do it then surely; new modern blenders can!

Thursday May 26 – Day 25:
Shopping for blenders. Bought around 12 – stationary and handheld, different brands for testing.

Friday May 27 – Day 26:
Started crushing fert prills, testing out the various blenders. More than half of them where completely useless as the shape of the container prevented proper circulation of the prills after crushing them. A suitable blender will ensure flawless circulation and result in a fully crushed batch within a reasonable time frame. Found a perfect blender; Electrolux. which was able to fully crush 95% of the prills, in portions of 0.5-0.7kg within 20-35 seconds.

Saturday May 28 – Day 27:
They had the Electrolux stationary blender in limited supply so I had to drive all day to purchase 6 from three different cities.

Sunday May 29 – Day 28:
Continued relocation of the fertilizer. Did another 600kg bag.

Monday May 30 – Day 29:
Completed the third 600kg bag. I could hardly move my fingers and I was certain that I had damaged them permanently. I decided to limit the process to three bags as the work required to process 5 bags (3000kg) would simply be too exhausting for one person…

Tuesday May 31 – Day 30:
I had to rest the whole day as I was completely exhausted…

Wednesday June 1 – Day 31:
Updating log

Thursday June 2 – Day 32:
I saw a car driving through the property while I was surfing the net. As I went to greet him I noticed he was taking pictures of the farm. He, around 50-60, said he was a tourist wanting to take landscape pictures. His actions and body language indicated however that he was lying. My instinct told me that he was a police officer. I offered him coffee and suggested he should go down to the river bank as it was the optimal place for taking photos. I noticed that he continued to take pictures of the farm. When he approached the house I chatted with him again. From what I understood, reading his body language and between the lines, he worked for the police and he was following up on the “marijuana farm” case. He disclosed that his daughter was a drug-sniffer-dog trainer. He was probably taking pictures in relation to this case. I told him that some people had set up a marijuana farm here a few years back. He seemed surprise, although he probably knew that already. This encounter was a concern for me for a few days, but I decided to just forget it as it wasn’t anything to do about it if he was to return. I’m just glad I gave him a good impression.

I decided to begin crushing the fertilizer using four Electrolux blenders simultaneously. However, it made a lot of noise so I decided to do this work from 23:00 to 07:00. I managed to complete 5 x 50kg bags, mixing in diesel 4 times per bag to distribute it evenly, then closing both the inner and outer bags properly using 5 individual pieces of duct tape. It is essential to hurry to place the crushed AN into the bag as it will begin to draw moisture from the air immediately after it is crushed, even while being inside the blender container.

Friday June 3 – Day 33:
Continued crushing prills and mixing with diesel. I got into a good routine and managed to complete 10 bags. Very exhausting. I spent around 1 hour for each of the first few bags the day before, but managed to increase efficiency so that I completed 1 bag every 40 minutes (optimal achievement was 1 bag per 32 minutes). 20 bags to go… 2 of the blenders broke after processing 12 bags, even though I used it on the lowest power alternative. Replaced them with new ones.

Saturday June 4 – Day 34:
Completed 6 bags.

Sunday June 5 – Day 35:
Completed 4 bags. 2 more blenders broke down. I have to buy a couple of new ones tomorrow.

Monday June 6 – Day 36:
Bought two more blenders. Completed crushing 1,600kg of fertilizer prills and mixing with diesel. I’m going to save the last 200kg and possibly use it as an “inner charge” mixed with purified RC fuel (nitro methane). I will most likely only have enough nitro for 1 x inner charge though. After completion of the grinding, it was prills and AN dust all over the place :)) My green AN-crushing clothing were now grey… Surely, I’m going to die from cancer within 12 months as I must have gotten a lot of this crap into my lungs even though I used a 3M mask… It took a while to clean it all up to prepare for the next phase.

Watching “The Shield”, a couple of episodes each day on average. I downloaded all 7 seasons in the start of May.

Tuesday June 7 – Day 37:
Went to the capitol and picked up the new hot plate stirrer that had arrived.

Wednesday June 8 – Day 38:
Started synthesizing picric acid, completed 1 out of 10 batches.

Thursday June 9 – Day 39:
I heard someone parking their car outside the house today. It was one of the neighbors wanting to buy the current crop as animal food. As I hadn’t had the time to plant a crop of my own, the current one was primarily timotei [Timothy Grass] and clover – used for food to cows and sheep. We discussed the issue for a while and I explained my situation to him. We agreed that he could harvest the current crop. He would return within 14 days to initiate the harvesting. I offered him a good price. As we strolled down to the field I was somewhat concerned that he would notice the fume hood fan pipe sticking out of the living room window…

Continued synthesizing 2 and 3 of 10 batches of picric acid and placing the finished compound to dry. It took a long time to complete the nitration of the acid due to the fact that I only had 1 hot plate stirrer. If I had 3 I would be able to complete all the PA within 2-3 days. Damn, something went wrong with these two batches. The solution was red and it failed to nitrate properly. I concluded that I must have used a bottle containing 37% sulfuric acid, instead of the required 90% +…

Friday June 10 – Day 40:
Continued synthesizing 4 and 5 of 10 batches picric acid and placing the finished compound to dry. I placed 50g of my best batch in the oven to prepare for testing and to use it for DDNP manufacturing. Potent PA should burn when lit with flame.

To my great disappointment, nothing happened when I did the fire test…! What the hell, how is that possible, it was completely dry and that particular batch was manufactured perfectly according to specifications!? I did everything according to specifications… Could the compound I have manufactured be inert???? Unfortunate circumstances rams cock in arse once again…! I started to have serious doubts and my morale and motivation started to shatter…

I concluded that given the recent events, I would now have to move forward with operation B, at least continue to complete all preparations for this as the primary operation seemed to wither away.

Saturday June 11 – Day 41:
As I was doing research on the net, a thunder storm approached, but it was still very far away. I have never had any problems with electrical overcharges the last 15 years because I always use specialty electrical outputs with gas cylinder electrical overcharge protection. Suddenly my PC made a relatively large bang, and the electricity went out. Once electricity was back on I noticed that my PC was dead. FFS, not again… As it was in the evening, I couldn’t fix it until Monday…

I prayed for the first time in a very long time today. I explained to God that unless he wanted the Marxist-Islamic alliance and the certain Islamic takeover of Europe to completely annihilate European Christendom within the next hundred years he must ensure that the warriors fighting for the preservation of European Christendom prevail. He must ensure that I succeed with my mission and as such; contribute to inspire thousands of other revolutionary conservatives/nationalists; anti- Communists and anti-Islamists throughout the European world.

Sunday June 12 – Day 42:
Although highly demoralized, I decided to do one last test of the PA compound. I decided to create a batch of DDNP using my best batch of picric acid. This was to be my last attempt to move ahead with operation A. I didn’t have much faith in creating such a difficult compound as DDNP when I couldn’t even manage to create a decent batch of PA… I spent most of the day preparing that batch of DDNP, then drying it in the oven for 4 hours.

Monday June 13 – Day 43:
I prepared a test device today and drove off to a very isolated site. The test bomb was composed of a 3g DDNP primary and a 30g PA secondary. If this test would fail, I would abandon operation A and move forward with the non-spectacular operation B.

I lit the fuse, went out of range and waited. It was probably the longest 10 seconds I have ever endured…

BOOM! The detonation was successful!!! 🙂 I quickly drove away to avoid any potential unwanted attention, from people in the vicinity. I would have to come back a few hours later to investigate the blast hole, to see if both compounds had detonated.

A few hours later, after returning from a restaurant in the southern town to celebrate this success, I went back to the blast site to evaluate the detonation. The DDNP primary detonated successfully but the dry picric acid booster did not detonate at all. So I confirmed that the PA was not inert, just of a very low purity grade. This could be sorted as I would now move forward with purification after completion of the last PA batches. Today was a very good day as I really needed this success.

Tuesday June 14 – Day 44:
Continued synthesizing picric acid and placing the finished compound to dry.

Wednesday June 15 – Day 45:
Continued synthesizing picric acid and placing the finished compound to dry.

Thursday June 16 – Day 46:
Began purification of the PA compound.

Friday June 17 – Day 47:
At this point in time, considering that this project has taken much longer than anticipated, I was in a serious liquidity squeeze. The fertilizer invoice on 4,500 euro should have been paid on May 19th. I had called to the company and asked for an increase grace period and they said it was ok as long as I paid before June 8th. This was almost 10 days ago and I received a follow up notice today stating that they would forward the invoice to the credit collection company on June 22nd. In addition to this; the farm rent for July, 1,250 euro, was due on June 25th and the invoice for the fume hood, the hot plate stirrer and my secondary fan, which I wasn’t even going to use, 2,800 euro, was due on June 26th. This would mean that I would officially default on the payment and receive a credit warning, which would basically blacklist me and thus preventing me from renting a car, as the car rental companies always perform a credit check. Needless to say; this problem could sabotage the whole operation and I needed to sort this out asap or the operation would be over before it had even started… I needed to acquire 8,550 euro within a week! As I had 1,500 in cash and in my primary account, I decided my only choice was to aggressively withdraw funds from all my 10 credit cards but even that wouldn’t be enough because of the weekly capacity limit. I called the farming supplier and made an agreement where I would pay half the amount now and the rest in July. They agreed. After aggressive cash withdrawal I managed to acquire the necessary funds, which allowed me to keep my head above the water until mid July.

At first, I thought I would manage to create enough picric acid booster material (1.5kg in total) to disregard the addition of AL powder. But considering the fact that I would only manage to produce aprox 200-300g of booster I had no choice than to continue to prepare my 150kg of aluminium powder for addition in the ANFO.

The 150kg of AL came in 4 hermetically sealed drums each containing around 37kg of AL. After reading the “security precautions”, however, I was completely freaked out. The drum openings where wielded with a soft metallic substance so it would be difficult to open them without taking extreme risk. The warnings stated; contact with oxygen will risk detonation of the AL powder, contact with metal, concrete and even plastic will significantly increase the chance of static electricity which can cause a detonation. Friction and shock can also cause detonation. Close proximity of oxidizers (gas, diesel) or close proximity to electrical outputs etc. can cause detonation.

I first planned on creating an outdoor mechanism that allowed me to thrust a steel spear like object, by using gravity, creating a 3 cm hole in the top of the drum. However, I ended up taking a regular knife and starting to file down the wielded enclosement, even if it involved high risk. At this point in time I was very concerned for a potential detonation. If the barrel of AL powder was to detonate and I somehow survived, I would probably lose both arms instantly severely. The blast wave/flame would probably cauterize my wounds resulting in an extended and extremely painful death. The most pragmatical approach to solving this potential problem was to place my loaded glock 34 close to the work area. And if I survived a detonation, losing both my arms, I could still fire a round to my head, in order to prevent un-necessary suffering using my toe to trigger.

Eventually, I manage to file open the enclosement. I then considered putting the drum upside down in one of my empty fertilizer bags to prevent the presence of high levels of oxygen.

This method proved to be too exhausting since I had to hold up the 37kg drum with my hands. I ended up with putting a large 3 x 4m plastic sheet on the concrete floor and carefully pouring the AL powder out of the opening. Small clouds of dust began to generate but nothing happened. I carefully continued until the drum was empty rolling the side of the drum in a circular pattern from the center of the AL powder already poured out, until the drum was empty. There were small clouds of AL powder generated but the biggest one was aprox 20 cm in diameter, which settled down after a while. I continued after the small clouds had settled. It’s also worth noting that I had closed all the windows of the cellar basement so the humidity was relatively high, while oxygen level was below average.

In any case, this method worked well and I had gathered all the AL powder on the sheet, and thus preparing it for the addition to the ANFO.

Since I had solved the AL problem, I continued the purification of the PA.

Saturday June 18 – Day 48:
I woke up at 11:00 and checked my phone. There was an SMS sent 09:30 from Tonje, the owners girlfriend. She said she was ON HER WAY UP to pick up some equipment from the barn!!! Omfg; considering the fact that it’s a 2-2.5 hour’s drive from the capitol she would be here in about half an hour!!! I’m so fucked! She has a large storage room in the back of the barn and she would need to pass all my ANFO bags to get there. I would need 12 hours minimum to relocate the 1.2 tons of ANFO, not to mention de-construct my chemistry rig, fume hood, fan and clean up all the beakers etc spread all around. And the living room is full of yellow stains. It seems I will be left no choice than to use my glock and initiate the evacuation plan!

I called her up. Luckily she hadn’t left yet. Thank God! I fed her a story which resulted in us agreeing that she would come on Monday around 20:00. That was a real close one… I spent the rest of the day on purifying another batch of picric acid and relocating 1.2 tons of ANFO bags, storing them in the storage area between the corn silo and another room. I refer to this area as the spider cave or the spider room as there is no lighting there and it is spider webs all over the place. It is a lot of old junk in this room covered with spider webs.

Sunday June 19 – Day 49:
I spent much of the day relocating equipment and storing them in the second floor of the house. I covered all the stains on the floor with a rug and covered the living room table with a blanket.

Monday June 20 – Day 50:
I spent the day purifying a batch of PA and cleaning all the beakers for storage. I went all over the property to ensure that it would be presentable for today’s visit. There was a 37kg pile of aluminium powder on plastic sheet I was unable to move so I covered it up as best as I could. There was also a lot of stains on the work bench in the barn I was unable to do anything about. Then there was the 1.8 tons of ANFO bags and equipment stashed in the spider cave. I covered it up properly but she would easily notice the diesel smell from the bags and uncover it if she went in there… The fate of the whole operation relies on her not noticing. She came to the farm around 20:30. We talked for a while and she said she wanted to stay the night, sleeping in one of the outhouses. It was late in the evening so she wanted to spend the next day getting things from her storage room. I said it was fine and I fed her a story about me having to salvage much of the fertilizer for long term storage, seeing that I would not be able to sow the planned crop (sugar beets) due to too much rocks in the soil. I needed her to be prepared in case she went into the spider room. I just hope she would let me know if she got suspicious the next day so I could take necessary action…

Tuesday June 21 – Day 51:
I woke up earlier that day to ensure that she didn’t start sniffing around in the house without me being there. At this point in time I figured it was a 50% chance she would get suspicious enough to contact the authorities. I made her some sandwiches and coffee later that day and we chatted for a couple of hours in the living room of the main house. It would seem as she hadn’t noticed anything, at least this is how I interpreted her tone, body language and judging from the topics we discussed. She went off later that day, and I figured that I would very shortly get a visit from the authorities if she forwarded her potential suspicions. In any case; there was nothing I could do if it came down to that…

Wednesday June 22 – Day 52:
I reinstalled Windows 7 on my PC hoping that it would solve my network problems. It didn’t work and I figured it had to be the network card or the phone line itself. I drove to the PC-repair guy in the local town and delivered it. It should be ready by tomorrow. I continued to prepare the chemistry equipment for getting ready to manufacture all DDNP batches. When I was done I completed the last purification batch of the unpurified picric acid and ended up with several liters of PA liquid that had to be chilled. I then drove to the local town and bought three portions of Chinese takeaway. Beef with noodles and fried rice, yummy!. I took an early night as I didn’t have any PC.

Thursday June 23 – Day 53:
I went to the PC-repair guy in the local town today and he brought very good news. Apparently, it was only the network card that had short circuited so he had replaced it with a new one and I should now finally be able to get online. Once back at the farm I got online and paid the outstanding on the remaining of my 9 credit cards so I wouldn’t default on any of the outstanding amounts. When I was about to log into the site of the 10th and last credit card provider my PC went poof and the power went down in the house! Seconds later I heard a large thunder. What the hell, not again!!! And it isn’t even raining ffs. I was able to get the PC running again without problems but my DSL-modem short circuited from the lightning strike as an electrical surge went through the phone line again. How is it possible to be this unlucky?! Only two hours after I’ve had my PC fixed nature comes and rapes me again… Thank god it was only my DSL-modem was destroyed as I have two extra DSL-modems left… ;P Nevertheless, my morale took a small dent and I decided to get it back up by watching two episodes of Rome and enjoying nice Chinese takeaway. Later that day set up the fume hood and fan, carrying it down from the second floor, carried down the PA liquid in all the beakers down to the cold cellar, awaiting further chilling in the refrigerator. I then prepared for the first large batch of DDNP, halfway completing it before putting the semi finished product in the fridge.

Friday June 24 – Day 54:
I continued on the second stage of the first large DDNP batch today, relocated some of the containers with PA liquid from the cellar to the fridge and updated the log. I couldn’t start another badge due to the fact that I only have two 2 liter beakers, very annoying. The worst part about synthesizing formulas with a lacking amount of equipment is the downtime due to waiting for natural heating or chilling of compounds. The whole house is stinking of chems now. DDNP liquid smells like fresh egg fart… <3 And I had to close all the windows to contribute for the liquid to reach room temp faster. All these chemical fumes can't possible be very healthy... I would have probably died from cancer within the next 12 months ;P Saturday June 25 – Day 55:
Finished first large batch of the DDNP today. The result, after drying should be approximately 5-12g after purification. As the first half of the PA liquid had been chilled in the fridge for 18 hours I went ahead and funnel filtered out the crystals. As this was supposed to be the best batch of PA I was extremely disappointed to see that there had been minimal precipitation of crystals in the liquid. It should have been 15g of crystals for each liter but it turned out to be 2g per liter. The only rational explanation is that the purification method I am using is significantly flawed. However, considering the fact that I tried putting ice in the beakers and even putting them in the freezer with poor results, I really do not know what has gone wrong. The only alternative reason would be that I used a flawed manufacturing method of PA or that I should have purified the acetylsalicylic acid prior to initiating the PA manufacturing. As I can’t really do anything at this point regardless, I would like to think it’s the purification method and not the manufacturing method.

After I had scraped out the yellow PA crystals and the brown DDNP crystals putting them in plastic boxes and placing them in the cold cellar I went to do some shopping in the northern town. There is a festival and there was a lot of things happening, a fair, various food stands, concerts etc. Since this town has a limited variety of fast food I decided to drive down to the southern town, eat and pick up some Chinese takeaway. There was a relatively hot girl on the restaurant today checking me out. Refined individuals like myself is a rare commodity here so I notice I do get a lot of attention in both the southern and the northern town. It’s the way I dress and look. There are mostly unrefined/un-cultivated people living here. I wear mostly the best pieces from my former life, which consists of very expensive brand clothing, LaCoste sweaters, piques etc. People can see from a mile away that I’m not from around here.

Later that day I initiated a new batch of DDNP. As I completed the first phase I noticed one of my two 2L beakers had a large crack in the bottom and drops of liquid was coming out. I was very lucky the beaker hadn’t completely cracked open as it would have destroyed my hot plate stirrer for sure. I remember there was a tiny crack that appeared during sulfuric acid purification when I was boiling as a madman outside. Now the beaker is ruined. To be honest; I’m surprised this hasn’t happened earlier as I’ve abused these two beakers excessively. I made a mistake by buying only two 2L beakers instead of 4-5. That mistake has cost me at least 3-4 days in total. The loss of this beaker poses a significant problem as I relied on these two beakers to take me through the whole manufacturing process. If I go down a size and use the last 1L beaker I have left (I managed to break one during washing after boiling all the sulfuric acid outside. it will take me an extra day to complete the DDNP manufacturing. I’ll see what I’ll do later today.

While waiting for the liquid to reach 4ªC in the fridge I went to train for the second time since I came to the farm. I used two backpacks, one in front and one on the back, with a total weight of 27kg. In addition I filled a container with 5L of liquid and held it with my left and then right arm partly stretched out in front of me. I took a 20 minute walk with these weights and it was a great exercise. As always I take protein powder + creatine before and after the exercise to maximize the outcome. I’m almost out of my steroid/winstrol tabs now as this project has taken significantly longer than expected. I only have a few days left worth of tabs so I have to sort this out in the coming days. I was thinking of traveling back to the capitol and restock after I complete the DDNP production. Damn, the most annoying thing about synthesizing DDNP is that you have to wait 12 hours for the liquid to reach 4ªC in the fridge, later on you have to wait 3-5 hours for the compound to chill from boiling to room temperature and at the last phase you need to wait 12-18 hours for the liquid to go from 4ªC to room temperature. In other words, one batch of DDNP takes approximately 40 hours. If I had 6 x 2L beakers instead of 2, it would allow me to complete 3 batches in less than 2 days (45 hours), instead of having to spend more than 5 days (120 hours) due to lack equipment…

Sunday June 26 – Day 56:
Completed the second and third phase of the second batch of DDNP. I moved the last batch of PA liquid from the cellar to the fridge. Updating log.

I am noticing increased pressure from my friends and family to come visit me at the farm. I am countering by saying I will be done with this seasons work within x weeks, and that they are more than welcome to visit me then. This has worked for 2 months now, but this pressure will increase progressively as I delay.

Monday June 27 – Day 57:
Filtered out the pure PA crystals from the last batch of PA water after chilling it in the fridge for 12+ hours. Cleaned out all the beakers. Completed the last stage of the second batch of DDNP. Initiated the first stage of the last batch of DDNP. As I have now re-initiated my training I did a workout later that evening.

Tuesday June 28 – Day 58:
Continued on the last DDNP batch. Went to the northern town to do some errands. Updating log. Later when searching online for efficient DDNP purification methods; I just learned that when acidifying the sodium picramate solution during DDNP manufacture, H2S and SO2 is released, which is potentially deadly. Crap, and I’ve been inhaling that diarrhea gas for three days now! I didn’t even bother turning on the fan in the fume hood on a couple of occasions during that stage…

Wednesday June 29 – Day 59:
Completed last batch of DDNP. I was now facing the task of purifying it, but was uncertain how to approach this. Was it necessary to purify it at all? How much would the VOD (velocity of detonation) suffer from not purifying it? Would it cut the VOD in half? My whole operation depended on the VOD from my primary being able to detonate the secondary explosive. After a few hours of research online I found that mixing the unpurified DDNP in acetone, then filtering it to another beaker with a lab filter or alternatively two coffee filters and then boiling the acetone away over a hot water bath, would be the optimal approach as the precipitation method with ice cold water method apparently didn’t work for those that tried it. The problem now was that I only had one conical flask and one porcelain boiling dish (100ml) suitable for this type of purification method. I feared that this method would take a very long time with the lack of equipment. As I didn’t have much choice I began the purification process. I managed to purify 1/3 of a batch (I had three batches) in 3 hours. As I got the hang of it I managed to reduce the time spent to 2 hours. Watching Spartacus – Blood & Sand, a brilliant series :-). It’s my favorite one, in addition to Rome, Battlestar Galactica, Caprica and Stargate Universe! <3. The Shield, Dexter, Sleeper Cell, Vampire Diaries and True Blood are good as well. All the series adhere to the multiculti ideology but such is life for the time being.

Thursday June 30 – Day 60:
This house is infested with beetles. Just now I was about to reach for a chocolate in my goodie bag and a beetle had crawled in, ffs. And an hour ago, when I was putting on my nitril gloves to do another DDNP purification cycle, something was crawling in one of the fingers 🙁 Needless to say, I freaked out… After that I started killing every little insect in view. And I’m up to 18 just in the last hour… Parts of this house is from 1750 so it’s probably several bug colonies in the walls.

I haven’t slept at all since yesterday, trying to complete the last DDNP purification. That will complete the chemistry phase and I can move on to the last ANFO –>ANALFO phase. Addition of aluminium and micro balloons to the 1.8 tons of ANFO. But before I start the last phase, I need to travel to the capitol for resupply.

When I went inside the barn yesterday, a window had loosened and laid smashed on the floor. There are several signs of noticeable wear outside as well. Three large trees has blown down and two panels on the side of the barn has blown off. Anyone seeing this must think I don’t give a damn… I haven’t had the time or energy to sort that out yet. Perhaps when I’m done with the chemistry phase…

As I’ve now completed the purification process of 25g of DDNP (I will save an additional batch of unpurified 12g as backup), it’s time for me to wrap up the chemistry phase. I do have 50L of impure nitro methane (30% RC fuel) in the barn but it’s a bit tricky to purify it. I will see what I can do about it tonight. If I can’t find an appropriate purification method I’ll just skip the NM altogether. In any case; I can now dismantle the lab, again…

I talked to my friend, Peter, after missing one of his inc. calls earlier. He is visiting his girlfriend in a nearby town and wanted to stop by the farm… I fed him a story about me going to the capitol and it worked, for now… However, it would not be suitable to receive visitors here as anyone stopping by would eventually understand that things are not what they seemed. I have to be careful not to answer his calls while he is so close to the farm. Manipulation and deceit can quickly turn around and act in your disfavor, if you are not careful. I guess I have been somewhat reckless in regards to maintaining my social network. Choosing complete isolation and asocial behavior, in phases like these, would probably be a more pragmatical approach for ensuring secrecy. However, complete isolation and asocial behavior can also defeat the whole purpose if you end up losing the love for the people you have sworn to protect. Because, why would you bless your people with the ultimate gift of love if every single person hates you?

Friday July 1 – Day 61:
Ok, I have now completely dismantled the lab and stored all the equipment in boxes on the second floor. Removed all the glass from the broken window near the work bench in the barn and fastened a plastic sheet with duct tape.

It is now 8 days since I was forced to drastically reduce my winstrol intake and 2 days since I ran out of both winstrol and DBOL tabs. I’m noticing slight symptoms of withdrawal resulting in loss of muscle mass (down 3kg from my peak at 96kg). I’m also low on no-Xplode and protein powder. I need to restock in the capitol. Damn, Peter is visiting his girlfriends sister in central Norway and Marius is unavailable due to work.

Saturday July 2 – Day 62:
Going over the travel route for both plan A and B for the upcoming event, familiarizing myself with the driving routes and plotting in destinations in my Garmin GPS. I went to the gym and did a really hard workout. I was surprised I managed to lift as more or less as much as I could when I was at my best, in late April. However, I had to cancel the program half way because I was getting dizzy. Damn, just too long since I properly worked out.

Nice, I have enough winstrol for 20 more days (10mg x 100 tabs). I should have ended this cycle after 6-7 weeks though and I am now on my 9th week… Not healthy at all and I’m concerned about my liver values.

I took my mom out to dinner this evening, then hooked up with Axel for a coffee afterwards, discussing politics. Oh, how I missed these discussions… 🙂 Went back to the farm late in the evening.

Sunday July 3 – Day 63:
Raining again… I planned to extract the armor cache today (the Pelican 1620 case I buried July 2010) or initiate evaporation purification of my 50ish liters of nitro methane, RC fuel. But I will have to wait for the first sunny day. Will have to begin the final phase shortly, the mixing of AL and micro balloons in the ANFO. I think I’ll take a day off prior to the upcoming phase shift and just download some new trance tunes. Lange feat. Sarah Howells (amazing voice) has three songs I haven’t yet downloaded;

Lange Ft. Sarah Howells – Fireworks (Club Mix),
Lange Ft. Sarah Howells – Out of the Sky (Original Mix) and
Lange feat. Sarah Howells “Let It All Out” (Lange)

Noticing that the testo withdrawal is contributing to increased aggressiveness. As I’m now continuing with 50mg it will most likely pass. I wish it would be possible to somehow manipulate this effect to my advantage later on when it is needed. Because the state seems to very efficiently suppress fear. I wonder if it is possible to acquire specialized “aggressiveness” pills on the market. It would probably be extremely useful in select military operations, especially when combined with steroids and ECA stack…! It would turn you into a superhuman one-man-army for 2 hours! <3 Monday July 4 – Day 64:
Updated log for a few hours. I then began the preparations for a trip to extract the armor cache, I had dug down a year ago in July 2010. I am really concerned that someone has somehow found the cache. It would be a significant setback if that was to be the case. Or what if moisture had somehow penetrated the pelican case I used. It would be possible considering the fact that the area where the cache is located has permafrost during winter.

I did not look forward to this extraction trip as I had nightmarish memories from digging down the case in the first place, 12 months ago. The location is in a mosquito infested area and combined with the labor intensive nature of this sub mission, I remember it as a painfully exhausting and dreadful experience.

After packing the necessary supplies for the trip, I went by a hunting store and purchased upgraded ammunition (200 SP rounds, costing 300 euro) for my .223 Ruger Mini 14.

After a few hours driving I reached the destination. It took me around 30 minutes to locate the grave as I had camouflaged the dig sight very thoroughly, covering it with tree stumps etc. As expected, there was a big welcoming party waiting for me… Oh my, apparently, due to their great feast a year ago the mosquito population had seemed to triple for that particular spot… To counter this, I wore a raincoat which served to protect me from insect bites. However, laboring intensively in an air tight raincoat is extremely painful, even dangerous. I generated at least 2L of sweat by the time I was done so I had to constantly hydrate from my camel back. After two and a half painful hours I had extracted the armor crate and its content. Considering the fact that I do not have a secondary pistol, I disregarded filling up the crate with survival gear which was the original plan.

As for the content of the crate, it was in perfect condition. Not a single drop of liquid had penetrated the crate and no moisture had entered the rubber seal whatsoever. This means that one can bury electronic devices as well without it being affected at all!!! 🙂 These Pelican cases are simply amazing for this purpose. I’m sure you can bury it for several years, even below permafrost, perhaps up to 10 years, before the rubber seal rots away. I’m very impressed!

I arrived at the farm late in the evening. My neighbor had started harvesting my crops, as was the agreement made earlier.

Tuesday July 5 – Day 65:
Spent a few hours on ammunition administration. Replaced most of the .223 HP (hollow point) rounds with SP rounds. According to my research; HP rounds for .223 tend, 80-90% of the time, to not mushroom as intended, which defeats much of their purpose. SP (soft point) on the other hand, at least for the .223 caliber, are more suitable for the purpose of inflicting maximum damage to vermin. I did other practical tasks this day including coloring some of my equipment black with permanent markers of various sizes. Emptied the armor case. Lol, I forgot I had put a batch of DBOL, winstrol and ECA stack in the case :-). Nice, now I don’t have to make more ECA stack tabs from scratch.

I realize that if I am apprehended with all this equipment I will have serious problems trying to explain its intended usage…

Wednesday July 6 – Day 66:
Changed the tertiary charge setup, and planned the last manufacturing phase accordingly in regards to ANALFO mixing. I will be creating 19 x 50kg bags containing 43kg of ANFO, 6.45kg of AL (15%) and 1.2kg of micro balloons (2.7%). After that I will create 13 x 50kg bags containing 46kg of ANFO, 2.3kg of AL (5%) and 1.2kg of MB (2-3%). Re-located most of the ANFO from the spider cave to the processing bench.

Thursday July 7 – Day 67:
Re-distributed the micro balloons from the 16kg bags into 13 individual plastic bags each containing 1.2kg. Prepared 35 such bags – equivalent to 2.5% of the 50kg fertilizer bags. Started to do the same with the aluminium powder, re-distributing them from the 36kg metal drums to individual plastic bags each containing 6kg. Finished 6 such bags, but after further consideration I will use 5kg instead of 6. I realize now that many of the warnings concerning aluminum powder is nothing more than scare mongering, probably to limit the legal liability of the producer. It is much safer to handle than people might expect, even in the micro fine 400 mesh (63 microns) powder I have. I have generated multiple clouds of aluminium and nothing has gone wrong. Just be very careful and you’ll be fine.

As I was working on weighing the micro balloons on my gram weight, using my 3M full face mask, I noticed an itch on my nose. That’s when I saw a large black beetle on the inside of the mask…FFS. Freaked me out. I usually check for insects every time I wear gloves or the mask, but I must have missed it this time.

The neighbor is still harvesting my field outside. He originally told me it would only take 6 hours total but it’s the third day now… As long as he is lurking around on my property he is going to slow me down significantly as I have to take extra security precautions. Not to mention I have to delay the nitro methane evaporation outside until he’s done. I could probably have done it inside, but considering the fact that methane forms potentially explosive/flammable vapors I’m not readily keen on evaporating the RC fuel inside.

Friday July 8 – Day 68:
I opened the remaining two aluminium drums and re-distributed the content in plastic bags (regular shopping bags). I then completed to weigh the content of the bags on a gram weight resulting in 18 bags a 5kg (10-12%), 10 bags a 2.35kg (5-6%) and finally two bags a 6.5 kg for the inner drum charge.

Saturday July 9 – Day 69:
I started mixing the ANFO with the micro balloons and the aluminium powder. I completed 2 bags a 50kg. It was very labor intensive, much more than I imagined as I had to first open the ANFO bags, then distribute 12.5kg of the content into a plastic 50L masonry bucket. I then poured the content into a plastic 100L masonry bucket. As much of the ANFO was packed into hard lumps I had to crush them with a rubber hammer. I then started to crush the smaller lumps with my hands until the ANFO was powdered. I then poured 25% of the micro balloon bag inside the bucket and mixed it (it will create clouds of micro balloon dust as you mix it), following by doing the same with the aluminium powder. Clouds of aluminum powder will be generated and the whole area will be covered in AL dust including your clothing, your hair, and every item you might have in a 5m radius. This is problematic as you end up spread AL dust everywhere as you walk around. I ended up assigning “mixing clothing and shoes” which I took off every time I left the room. It’s the only thing you can do to prevent spreading it somewhat but you will still get stained by AL. I considered using a hazmat suit or my different kind of lightweight dust suit but the problem is that it gets too hot when combined with intensive labor like mixing.

As the ANALFO mix was complete I then poured the mix into an empty 50kg fertilizer bag. This took 30 minutes so processing a full 50kg bag of ANFO creating ANALFO took 2 hours. After I had prepared 2.5 bags of ANALFO I was exhausted and decided to take a break. Mixing ANALFO is very messy and it’s especially annoying that you get aluminium dust everywhere.

Later that day while I was enjoying a meal, the neighbor stopped by. As I had just completed the mixing session I still had AL stains in my face and powder in my hair. I tried the best I could to quickly wash it off but my hair still had a silver tone and it looked very weird. The neighbor asked if he could fertilize my fields and remove some rocks as this would increase the yield of animal fodder by 100% (the current crop). As this meant that he would get several people to work on my property for a week’s time I declined telling him that I had plans of my own.

Later that day, while I was watching an episode of True Blood, I saw a large van driving by the house and parking next to my car. There were at least 4 people inside. Nice, I thought; it’s probably a SWAT team coming to skull-fuck me. The farmer must have tipped them off… Thank God, it was only 4 Polacks looking for worked and I sent them on their way. It would have been tempting to hire them to mix my ANALFO… <3, hadn't it been for the fact that they would have understood what was up 🙂 Later that evening I put a large plastic container box with 8L of 30% nitro methane/18% oil/52% methanol outside to test the evaporation method. Theoretically; the methanol should evaporate before the nitromethane starts to evaporate. As such; you just let the mix evaporate down from 8L to aproximately 4L. This should leave you with aprox 60% nitro and 36% oil which is, according to my sources, 100% more efficient as an oxidizer as diesel when mixed with ANFO or ANALFO. According to my source; 25-40% nitro is as efficient as diesel, so anything higher purity is better. Sunday July 10 – Day 70:
I mixed one more bag of ANALFO manually. There must be a better way than this… One single bag in 2 hours!? I will try to use my electrical concrete mixer instead. I bought it second hand for 150 euro. I am just very worried about three things when using a concrete mixer; the friction caused by the electrical stirrer, ANALFO/ANFO/AL in direct contact with metal, a spark from the electrical system. As these three factors can cause a detonation, I will keep my glock 34 close by in case I somehow survive an explosion… I feel I don’t have a choice as mixing manually is just too fatiguing and time consuming. I need a method that allows me to mix at least 1 x 50kg bag every hour or faster. In any case; let me die another day…

The use of my electrical concrete mixer to blend the ANALFO went without much complication. As usual, I worry too much about safety… <3 I poured in 46kg of ANFO and activated the mixer. The large and small lumps would not be crushed so I had to crush them with my hands manually. I then went on to mixing in the 1.2 kg of micro balloons and the 5kg of aluminium powder (400 mesh/63 microns, leafed). It generated significant AL dust clouds and it didn't mix optimally. However, I was able to complete one bag of ANALFO in 90 minutes so I was able to improve my blending per bag by 30 minutes compared to the manual method. Also, using the concrete mixer is much less fatiguing. Perhaps with time, I will be able to reduce this to 60 minutes per bag. In any case; it is hard work for one person and I am really beginning to understand why Mr. McVeigh limited his manufacturing to 600kg. He probably encountered much of the issues I did and he probably had to learn everything the hard way just as I have done. My RC fuel (30% nitro methane, 18% oil, 52% methanol) has been allowed to evaporate for 26 hours now (average 20-25C daytime, 10-15C nighttime) and the mix has now reduced its mass by 50%, from 7.8 liters to 3.9 liters. I poured the liquid into a 4L container. I noticed that the evaporation took considerable longer during the night. I'm a bit concerned regarding the exothermic nature of methanol. Methanol absorbs moisture from the air and the water it absorbs has the same evaporation temperature as nitro methane. I have been unable to research exactly how much the absorption ratio is compared to the evaporation ratio as little information is found online regarding this purification method. If my assumptions are grossly incorrect, and the research I found was false, I will end up with an inert goo which will ruin the detonation completely. If I'm right, however, the oxidizer I will end up with will be more than twice as powerful than diesel and will reduce the need for a booster to detonate the ANFO/ANALFO. The inner charge I will end up with will be 50kg of ANALNM (Ammonium Nitrate ALuminium Nitro Methane). Regarding the purification of RC fuel; I did however find dozens of distillation methods from advanced to less advanced but the problem is that you need a decent distillation rig and even if you have the equipment, it is quite complicated and very dangerous to isolate the nitro methane that way. According to my overall research regarding nitro methane purification the most pragmatical approach, given my limited resources, is to just do an evaporation purification. I have a total of 72 liters of RC fuel with an average nitro methane percentage of 28%. In any case; I feel I've been really slacking the last week and I really need to step up the pace now. At least now, everything is set so I don't have to research any more techniques and methods. Monday July 11 – Day 71:
Mixing 3 bags (alr done 4)

I reserved a rental car today, from AVIS, the same company I’m already renting my primary car from. There was not enough credit on the card for a deposit so I had to go to the northern town and transfer 2000 euro to it.

Considering the fact that I am currently working on the most dreadful task, I bought a lot of exquisite food and candy today. I really need to recharge my batteries and increase my morale before initiating the ANALFO mixing. Good food and candy is a central aspect of my reward system which keeps me going. It has proven efficient so far. Occasionally, if I’m really not keen on doing a specific sub task, I take a red bull, a shake of noXplode or an ECA stack – to get a jump start before jumping into something I’m not looking forward to – f example extremely lame or labor intensive tasks or tasks involving great risk of injury or death.

I continued to purify, through evaporation, the RC fuel today, pouring 32L into four different plastic containers. I had marked the containers with a permanent marker for 2L, 4L and 8L which allows me to see how many percent it has evaporated. I put one in the outhouse, to test whether inside evap would be better, and three outside. I placed them all in the outhouse before I went to bed to prevent the batches from being ruined in case of rain during the night. I noticed the batch I left in the outhouse (at around 15C) had only evaporated by 1L, in comparison to the others (20-25C) which had evaporated by 3L, which indicates that outside evap is preferable.

The mixing of AL powder and micro balloons with the ANFO is a truly dreadful task. Not only is it extremely messy; it is very labor intensive as well, not to mention that you have to work using the 3M gas mask. I hate this task. It’s the most dreadful job I’ve encountered during the whole operation… However, I’ve finally managed to find a good mixing routine for the ANALFO. Basically; considering the fact that the whole process with mixing is extremely messy, I could not take any smoking breaks or leave the work bench area at all. As soon as I initiate the mixing I literally turn into the tin man…, with a layer of AL dust all over me. As it is really difficult to remove this dust from the surfaces it touches, I end up smearing the stuff on my face (it gets on the inside of my mask when it touches the rubber straps) and on my fingers etc. To keep an acceptable pace I am therefore forced to work without a break for 5 hours (or until I complete 4 x 50kg bags). I’ve managed to reduce the work needed to complete one bag from 1.5 hours to 1.2 hours. The most time consuming aspect are all the ANFO lumps I have to crush manually with my fingers. The electrical cement mixer is really helpful though, and not dangerous to use at all, and will reduce the amount of time spent on each bag by 40 minutes (from 2 hours manually, to 1.2 hours with a cement mixer). I realize this is a vulnerable phase though, as it will be hard to conceal AL dust and hard to clean surfaces with AL smearing.

Tuesday July 12 – Day 72:
Evaporated RC fuel outside and mixed 4 bags (200kg) of ANALFO.

Found a good method to determine nitromethane vs. methanol content:

The boiling point of methanol is aprox 63ªC while the BP of nitromethane is aprox 100ªC. However, there is an even easier way to determine NM content. Just weigh it! Methanol is extremely light and nitromethane extremely heavy.

Methanol = 800g per liter
Motor oil = 875g per liter (might be wrong)
Nitromethane = 1195g per liter
(Water = 1000g per liter)

A gallon of Methanol = 3.78L * 800 = 3024g
A gallon of Motor Oil = 3.78L * 875 = 3307.5g
A gallon of Nitromethane = 3.78L * 1195 = 4517g
(A gallon of water = 3.78L * 1000 = 3780g)

I added water just in case due to the exothermic nature of methanol (it absorbs water/moisture from the air). In any case; it will now be easier to figure out which of my completed 8 batches of purified RC fuel has the highest NM content, simply by using a gram weight.

Wednesday July 13 – Day 73:
I cleaned my 3M gas mask today. It was full of AL powder/smearing and the multifilter were full of AL dust. Unfortunately; these are my last multifilters (particle and vapor filter combined) so I can’t replace them. I do have a couple of sets of particle filters but I believe they won’t be of much use to filter the diesel fumes when mixing ANALFO.

Continued to evaporate RC fuel outside and mixed 2 bags of ANALFO. After mixing the second bag I began to experience dizziness, blood pressure elevation and nausea, classical symptoms of excessive short-term exposure of diesel. Diesel is a vicious substance as it is absorbed even through most glove material. Nitrile gloves are best, neoprene somewhat good but vinyl gloves provide little or no protection. At this point in time, the clothing I am using to mix ANALFO are more or less soaked in diesel and I knew it was not healthy. But the problem is that using a hazmat suit for mixing is problematic as it will be very hard to labor while wearing it. I have another chemical suit that are more comfortable than the hazmat suit so I will try using that for the last batch. Diesel poisoning isn’t lethal, but will weaken your body over time. However, excessive exposure over a long period of time can shut down your kidneys, which will obviously be lethal. To somewhat counter all the crap I’ve been exposed to the last two months I’m using anti-toxin tabs (herbal supplements strengthening the liver and kidneys), protein supplements, creatine and a multitude of mineral/vitamin supplements.

Thursday July 14 – Day 74:
I’m not feeling so hot today. I’m in a weakened state atm. most likely due to diesel poisoning. It shouldn’t take more than 24 hours before my immune system has defeated the negative effects of this exposure. I hope I haven’t been overexposed as it may lead to acute kidney shutdown. Needless to say; I’m going to use my protective suit to mix the last 4 bags today. Finished the last 4 bags. Using the protective suit (fertilizer sprayer suit, used by farmers) proved to be better than expected, except the fact that I completely soaked my t-shirt and boxer with sweat by the time I was done.

Planning a train trip to the capitol tomorrow. I have to get up at around 06:00 tomorrow. Will do some errands while I’m there including picking up a van from AVIS car rental company (carrying cap 1340kg).

Damn, I was hoping the last 4 batches of RC fuel would be finished before the trip tomorrow.

Total weight of ANALFO, 18 bags = 900kg + 50kg ANALNM (inner charge) + 130kg (1 person + gear) + 80kg (mini MC) = 1160kg. The max carrying capacity of Volkswagen Crafter is 1340kg but it’s safer to leave a certain safety margin, just in case.

Friday July 15 – Day 75:
I took the train to the capitol today to pick up the car I had reserved. Took a taxi from the train station to the car rental company. Came back to the farm late in the evening.

Saturday July 16 – Day 76:
Took a taxi to the train station in the northern town to pick up the car. Did some errands and went back to the farm. Started removing the car rental sticker with the rubber-eraser-drill-bit. I had bought 4 of these specialty drill erasers which are designed to remove decor from cars. I used one and a half bit before I was done but there were significant traces left on the car. I treated the surface with a spray on de-greasing chemical three times but there were still some quite noticeable traces left. Will try a couple of more times tomorrow. Finished the last evaporation-purification of the RC fuel.

Sunday July 17 – Day 77:
Continued removing traces of the decor on the rental car. Washed twice with acetone then another round of degreasing. There are still significant traces but at this point I do not have time to take additional measures.

An unknown car drove in to the front yard today. As I went out to greet them I noticed it was just two women who had taken a wrong turn.

The neighbor started collecting the animal-fodder-balls from the field today. His activities delayed my work for several hours.

I weighed the 9 batches of purified RC fuel. I have a lot more than I need so I will just use two of the best batches.

Weighing 1.8L in a 2L beaker on a gram weight:

Batches 1-4 were evaporated from: 25% nitro, 12% oil, 63% methanol from 7.8L to 3L

Batches 5-9 were evaporated from 30% nitro, 18% oil, 52% methanol, from 7.8L to 3.9L

All the batches have an unknown water content (exothermic properties of methanol ftl.)

Batch 1: 1759g
Batch 2: 1753g
Batch 3: 1738g
Batch 4: 1730g
Batch 5: 1786g
Batch 6: 1779g
Batch 7: 1784g
Batch 8: 1771g
Batch 9: 1770g

Weight tests were somewhat inconclusive so decided to do an additional fire test, taking 20ml from the best batches and using a stop watch to see how long the flame burns.

Batch 1: 1:49 min Batch 5: 1:53 min

Fire test proved somewhat inconclusive but my gut feeling tells me that I should go for batch 5 and batch 7. It should be more than 50% nitromethane in the two batches.

Will create secondary detonator to be detonated from ANALFO, without booster in addition to the detonator with booster from the ANALNM inner charges). Will add a delay fuse of +30 sec for the secondary detonator. I feel this is the safest option if somehow the ANALNM mix proves to be a disaster.

Needless to say, I’m really not sure about the potency of the RC nitro oxidizer. My calculations indicate that the nitro content can be as low as 30% but I cannot confirm this as my weight estimate for the oil might be incorrect. In addition; I cannot verify the water content of the mix.

In any case; for the ANALNM material I will go for:

38kg AN 6L RC/nitro oxidizer 6kg AL 1.2kg MB

Total: 51.2kg of material

Monday July 18 – Day 78:
I completed the inner charge. However, the drum only had enough space for approximately 40kg of ANALNM. I poured the finished product into 2 x double plastic bags, the inner bags of the 50kg fertilizer bags. There were no problems at all mixing everything together in the concrete mixer. However, since I only made one inner charge I wish I had purchased pure AN (98%) from ice packs as it would be more potent than the 27-0-0 (85%ish) – farmer (C)AN.

Will have less time to update log from now on…

That night, after dark, I loaded in everything in the van. Still need to strap it properly in place though.

Tested gear.

Exhausted!!! Good workout though. I’m drinking 4 x protein shakes per day now to maximize muscle generation. At this point in time I should be fearful, but I’m just too exhausted to think much about it.

Placed PA to dry during the night.

Tuesday July 19 – Day 79:
Dried 1 out of 4 batches of PA/DDNP in the oven at 50-70ª C. First batch took 9 hours, wtf!! This is going to delay everything… Created anti-friction/shock stuffing by cutting up a madras and placing it in three layers in a card board box. I’ll use these to transport the booster and detonators separate from the main cargo.

Started packing down gear, filled diesel/gasoline on cars and mini-MC. Tested mini-MC. Treaded a fuse inside a surgical tube and tested it. There were 75 cm of fuse so it should burn for 75 seconds.

Due to the lack of oxygen in the tube it burnt in less than 2 sec!! Damn, I’m glad I checked this beforehand… No surgical tube then…

Went to a higher quality restaurant in the southern town and feasted. Yummy! Ive been working extremely hard the last few days and I’m completely exhausted. I have been using ECA stack to help keep this pace. Looks like I will have to take one more today…

Currently drying batch 2 out of 4. Hopefully I will complete it before I go to bed.

Dry PA etc. Test PA. Pack and load gear during day, Go to sleep at 22:00

06:30 – drive 1 Small, there 10:00 train back (11:00), there 14:00, taxi, there 14:30 drive 2. (there 17:00) Check area. Go to bed 18:30

Wednesday July 20 – Day 80:
Wake up at 02:30. Start downloading movie at 02:30, 05:30 Eat + pack, start seeding at 06:00. Done 08:30. Leave 08:30 Drive 1, Back 09:30 Drive 2 There 10:00 Leave There 10:45

Thursday July 21 – Day 81:
Drive 11 hours straight to Kautokeino, sort out cheap hotel

Friday July 22 – Day 82:
Initiate blasting sequences at pre-determined sites. Test dirt for gram of gold per kg. Have enough material for at least 20 blasts. Start capitalization of project as soon as I have results. Time is running out, liquidity squeeze inc. Call/email all my investor contacts with updated online prospectus/pdf.

This is going to be an all-or-nothing scenario. If I fail to generate acceptable precious metals yields, in combination with swift initiation of the capitalization for securing the areas I will be heavily indebted. I must complete capitalization of the mineral extraction project within August at latest! When I have the required seed capital I will have enough funds to employ the services of professional blasting engineers.

If all fails, I will initiate my career with a private security firm in conflict zones to acquire maximum funds in the shortest period of time to repay the debts.

First coming costume party this autumn, dress up as a police officer. Arrive with insignias 🙂 Will be awesome as people will be very astonished 🙂

Side note; imagine if law enforcement would visit me the next days. They would probably get the wrong idea and think I was a terrorist, lol :o)

Optimal time budget, one person –
ANFO: 3 x 600kg, PA: 3 x 0,5kg, DDNP: 3 x 10g

If I had known then, what I know today, by following this guide, I would have managed to complete the operation within 30 days instead of using almost 80 days. By following my guide, anyone can create the foundation for a spectacular operation with only 1 person in less than a month even if adding 2 “resting” days! 🙂

Day 1: Moving and getting your equipment and gear into place.
Day 2: Installing all equipment – fume hood, fan etc.
Day 3: Finishing the metal skeletons/cylinders for the blast devices and completing other practical issues relating to gear and equipment.
Day 4: Creating an evacuation/emergency strategy, packing an evacuation kit (survival gear etc.)
Day 5: Grinding 2.5kg of aspirin: 30 minutes with blender, manufacture of acetylsalicylic acid from aspirin (4 hours) + drying in oven (4 hours per batch x 3)
Day 6: Manufacture of acetylsalicylic acid from aspirin (4 hours) + drying in oven (4 hours per batch x 3)
Day 7: Boiling sulfuric acid using 4 cooking plates outside, from 23:00-07:00, 15-18L->5L of 90% +
Day 8: Boiling sulfuric acid using 4 cooking plates outside, from 23:00-07:00, 15-18L->5L of 90% +
Day 9: Creating Picric Acid (6 out of 12 batches using 3 x hot plate stirrers)
Day 10: Creating Picric Acid (12 out of 12 batches using 3 x hot plate stirrers). Completed
Day 11: Purification of Picric Acid
Day 12: Purification of Picric Acid
Day 13: Purification of Picric Acid. Completed
Day 14: Creating DDNP
Day 15: Creating DDNP. Completed
Day 16: Relocation of 27-0-0 fertilizer. Break down a 600kg bag into 13-14 x 50kg bags, load in the truck, drive to location where you are going to crush them if needed.
Day 17: Relocation of fertilizer. Break down another 600kg bag into 13-14 x 50kg bags.
Day 18: Relocation of fertilizer. Break down the last 600kg bag into 13-14 x 50kg bags.
Day 19: Initiate fertilizer grinding phase using 4 stationary blenders simultaneously. It will take aprox. 30-40 minutes to complete a full 50kg bag of ANFO, including the addition of the diesel and sealing the inner and outer bag with pieces of duct tape. It should be done nighttime between 23:00-07:00 as it’s quite noisy. The task also includes filling 20L plastic containers with diesel, and then breaking each 20L container down to 4L containers (empty distilled water containers) Complete 9 x 50kg bags of ANFO.
Day 20: Complete 9 x 50kg bags of ANFO.
Day 21: Complete 9 x 50kg bags of ANFO.
Day 22: Complete 9 x 50kg bags of ANFO. Completed.
Day 23: Mix in 2.5% (by weight) micro balloons and 10-15% (by weight) aluminium powder into the now hardened ANFO.
Day 24: Mix in 2.5% micro balloons and 10-15% aluminium powder into the now hardened ANFO.
Day 25: Mix in 2.5% micro balloons and 10-15% aluminium powder into the now hardened ANFO.
Day 26: Prepare trucks for transportation.
Day 27: Prepare trucks for transportation.
Day 28: Prepare trucks for transportation.
Day 29: Completed

The following chart illustrates labor required vs. risk of apprehension for individuals who are NOT already on any watch list.

Risk vs. Labor Time required to complete Risk of apprehension

1 person 30 days 30%

2 person 20 days 60%

3 person 16 days 80%

4 person 13 days 90%

5 person 12 days 90-95%

The old saying; “if you want something done, then do it yourself” is as relevant now as it was then. More than one “chef” does not mean that you will do tasks twice as fast. In many cases; you could do it all yourself, it will just take a little more time. AND, without taking unacceptable risks. The conclusion is undeniable.

I believe this will be my last entry. It is now Fri July 22nd, 12:51.

Sincere regards,

Andrew Berwick
Justiciar Knight Commander
Knights Templar Europe
Knights Templar Norway

In another section, Breivik anticipated the aftermath of his deed:

I have been thinking about my post-operational situation, in case I survive a successful mission and live to stand a multiculturalist trial. When I wake up at the hospital, after surviving the gunshot wounds inflicted on me, I realize at least for me personally, I will be waking up to a world of shit, a living nightmare. Not only will all my friends and family detest me and call me a monster; the united global multiculturalist media will have their hands full figuring out multiple ways to character assassinate, vilify and demonize. They will possibly do everything they can to distort the truth about me, KT and our true objectives, and attempt to make even revolutionary conservatives detest me. They will label me as a racist, fascist, Nazi-monster as they usually do with everyone who opposesmulticulturalism/cultural Marxism. However, since I manifest their worst nightmare (systematical and organized executions of multiculturalist traitors), they will probably just give me the full propaganda rape package and propagate the following accusations: pedophile, engaged in incest activities, homosexual, psycho, ADHD, thief, non-educated, inbred, maniac, insane, monster etc. I will be labeled as the biggest (Nazi-)monster ever witnessed since WW2.

I have an extremely strong psyche (stronger than anyone I have ever known) but I am seriously contemplating that it is perhaps biologically impossible to survive the mental, perhaps coupled with physical torture, I will be facing without completely breaking down on a psychological level. I guess I will have to wait and find out.

Slavoj Zizek Not Gaga for Pop

Posted on July 7, 2011 by Eric Verlo

Slovenian philosopher Slovaj Zizek has a cult following like Lady Gaga, but denied this weekend any romantic connection. I write this with tongue in cheek, Slavoj’s, because of his comic protestations. Zizek was cajoled by Amy Goodman at Saturday’s London Fronline Club event: did he categorically denied the rumor? Zizek said “Absolute denial on everything.” But he wasn’t dissing Gaga or the notoriety of the mischievous meme, even as he protested: “I didn’t even listen to not one of her songs!” The audience ate it up; how total a rejection. Except Zizek continued playfully: “My God, I listen to Schubert and Schumann songs. Sorry, I’m a conservative.” And there you have the reigning academic of pop cultural references, who cannot make a point without recalling a movie scene, rejecting not Lady Gaga, but Pop. Obviously Zizek’s pop culture isn’t yours.

It may escape the notice of average film goers that when themes evoke cinematic moments to Zizek’s memory, they’re not from There’s Something About Mary. Saturday’s discussion brought up Marx Brothers, yes, in the company of Lubitsch and Truffaut, moments of cinema verité, touches of social comment with Zizek’s nuance already scripted. Yes he’s famously evoked Tom & Jerry, and more recently tried to project Hosni Mubarak’s attention to Wiley Coyote’s fatal overrun of the cliff, but I think it’s clear, like Schubert and Schumann, we’re talking about classics. Academia may like to paint Zizek a populist, but his material is not plebeian.

For the curious, from the Marx Brothers: “My client may look like an idiot, and act like an idiot. That shouldn’t distract you, he is an idiot.” (About Rumsfeld being a liar.)

From Night And Day: A young lover finally yields unceremoniously to her suitor’s whining entreaties, to which he puts on the brakes like a reluctant prude. (About the West’s rejection of what it’s always pretended to want, a secular revolution in Egypt.)

From Ninotchka: Customer “May I have a coffee with cream?” Waiter: “We don’t have cream, we have milk. May I offer you a coffee without milk?” (About speaking the unspoken pretense.)

Where Zizek hits low perhaps are his wildly off-color jokes, gleaned from friends over drinks –I like to imagine– as opposed to circulated in morning emails. Zizek was full of sexism-loaded analogies on Saturday, and one joke in particular looks to have fallen between the edits which Democracy Now is re-airing, and even off the published transcript of the full event.

So I’ll retell it, and you tell me if Zizek could have made his point without getting so obscene. He’s addressing human nature’s desire for favorable news, even as by definition it masks atrocity.

A man’s wife is treated in the hospital for a potentially fatal condition. The doctor comes out and tells the husband, there’s good news and bad news. The good news is, we saved your wife, she will live. The bad news is, well, due to circumstances we couldn’t avoid, her rectal muscles no longer function, so she’ll be shitting uncontrollably the rest of her life, and her vagina will be secreting a substance, very unpleasant, and so on, her mouth, her nose, disgusting, and so on. Noticing the husband’s discomfort increasing to an unbearable pitch, the doctor tells him: Relax, I’m kidding, don’t worry, your wife died.

Zizek was illustrating the new Wikileaks state of affairs, our corporate government and its press rejecting the truths which emerged from the leaks, preferring the more palatable, no matter the horrors it perpetuates. Between reality and Zizek’s joke, which was the more obscene?

I also love Zizek’s propensity to drop “and so on” between statements, like verbal checkmarks on the points he’s hit. It’s post-graduate lecture shorthand for “you know the rest.” Chomsky does it too, by fading into mumbles, and it is frustrating to those of us who haven’t covered the assigned reading. But it’s a reminder too, of how much out there we cannot hope to master. That shouldn’t stand in our way of trying to grasp the bigger picture.

Am I right, Slavoj Zizek big picture speaks to us using the vocabulary of the big picture show? It’s the silver screen to be precise, and as yet he’s limited himself to visuals, not lyrics. I think Zizek’s candid revelation about his musical preferences leaves a hint for us that the bigger picture isn’t to be found in today’s compression sculpted pop sound, no matter how politically clever or Gaga the music.

French craft DIGNITY breaks for Gaza, leads Flotilla II until rest allowed to go

Posted on July 5, 2011 by Eric Verlo

UPDATED– In a flurry of conflicting tweets, French Flotilla II member DIGNITE AL KARAMA made for the open sea, beyond the reach of Greek authorities currently detaining the AUDACITY OF HOPE, TAHRIR, LOUISE MICHEL, GUERNICA, JULIANO and others. Reporter Quentin Girard has been communicating the DIGNITY’s progress, its eight activists electing last night to complete their run all the way to Gaza.

The French vessel escaped Greece on a technicality, as a pleasure craft, the Dignity is not confined by the regulations being used to block the larger Flotilla participants. Aboard the Dignity with Girard, are Olivier Besancenot, Julien Rivoire, Omeyyaa Sedic, Nicole Kiil-Nielsen, Annick Coupé, Nabil Ennasr. (Both Coupé and Besancenot are registered on Twitter, but neither has communicated yet.)

Girard’s most recent tweets, translated:

July 5, 3:02
All is well thank you 🙂 but we were in an area where reception was bad.

July 5, 3:15
Despite what we can read, the Dignity is still in international waters. It will be there in one hour.

July 5, 7:41
The passengers of the Dignity have finally come to the decision (only now really) to go to Gaza.

July 5, 8:19
TF1 should attempt to rejoin Dignity and embark.

July 5, 8:43
We’re moving again after a “media” pause on the high seas. 15 hours of sea left before I might go silent. Kisses!

July 5, 12:19
Into the night the DIGNITY continues its advance. In the distance, small lights.

July 5, 13:38
Not really enough beds for everyone, so I sleep under the stars on the upper deck. beautiful sky.

In their original French:

05.07 3:02
tout va bien merci 🙂 mais on était dans un endroit où ça captait mal.

05.07 3:15
Malgré ce qu’on peut lire le Dignité n’est pas encore dans les eaux internationales. Il y sera dans une heure.

05.07 7:41
Les passagers du Dignité viennent de prendre enfin (seulement maintenant vraiment) la décision d’aller jusqu’à Gaza

05.07 8:19
TF1 devrait tenter de rejoindre le Dignité et embarquer dessus

05.07 8:43
On bouge à nouveau après une pause “média” en haute mer. C’est parti pour 15h de mer, où je risque d’être silencieux. Des bises.

05.07 12:19
Dans la nuit le dignité avance toujours. Au loin, des petites lumières.

05.07 13:38
Pas vraiment de couchettes pour tout le monde, donc je dors à la belle étoile, sur le pont supérieur. Beau ciel

Below is the Girard’s July 5 article in the LIBERTE.FR (auto-translated, sorry, until I can review it)

En route to Gaza, “Dignity” is appealing to the media

The French ship of the “freedom flotilla” sailing in international waters off the coast of Greece. The crew decided to go to Gaza.

By QUENTIN GIRARD special envoy on the “Dignity”

16 hours in Greece, somewhere in international waters, on Tuesday afternoon. After much discussion, the Dignity passengers finally made their decision. They will go to Gaza. A bit surreal moment where the middle of the sea, tossed by the waves, they set up banners and make an official statement.

When they left the industrial port of Salamina, Monday morning, they did not really know how far they try to go. There, as they finally arrived in international waters a little to 15 hours – after wet night in a small cove – they say they are determined. “We’re going to Gaza. The French and international community officially announced that they supported us regardless of our decision, “enthuses Julien Rivoire, one of the spokesmen of the campaign. “But to get there, we also need the media, as TV join us to show our work and safety issues,” he continues.

In the distance we see no island, not even a few freighters, these little black spots that usually reassuring scattered throughout the year. “We wanted to show that we could block the Greek blockade, says Julien Rivoire. It once was that we wondered what we were doing then. ”

Return to France? Impossible

That same morning, the discussion was intense as ever on the Dignity. What to do? Return to France? Impossible for them. Go to another country such as Tunisia symbolic to wait, to show that it is a stopover? Why not, it’s better, they say. But no. The only viable solution they think is necessary. Go to Gaza. “You have the dignity to the end represents French and international committees,” argues Olivier Besancenot.

“The important thing that determines the political feasibility, technical feasibility, must be as representative as possible and supported,” Nabil Esnari continues, President of the Association of Muslims in France. “We do not want to be seen as Islamic-leftist Khmer-green-act in our corner,” says the MP-Europe Ecology Nicole Kiil-Nielsen.

“My preference would be to go to Gaza without delay,” takes on Olivier Besancenot position as others. “Our protection is proof that we exist, we continue to move forward. We can not afford to become a ghost ship. ”

There remains the question of technical means. The Dignity is a small yacht of 15 meters long, categorized craft. It was originally one of the smaller boats in the fleet. He has no self to go off the ridge to Gaza. It would necessarily need to be refueled and water en route. Hence the difficulty that there will in the coming hours to coordinate the political ambitions and technical means.

A small creek, goats, and … Sea

But they want confident. The twelve passengers (1) are refreshed by their two days at sea after a week of pitfalls in Athens. Although the coup, the Greek landscapes provide a particular coloration to the adventure. In the capital locked up in meeting rooms to multiply the points and plan protests, the mood was serious and solemn. Not even have time to visit the Acropolis.
There hard to escape the Greek islands. On the night of Monday and Tuesday, the Dignity was anchored in a cove of a small island. In the morning, passengers were woken up by goats with bells tinkle merrily. A shepherd ran along the cliff, the whoop, some small white houses with blue shutters, of steep cliffs, the water so beautiful … “In the morning, you go through three stages,” said Olivier Besancenot. “First you wake up, you do not know where you are, then you look around you and you say,” oh yes, it’s beautiful. ” And just after you wonder what’s next meeting, what is the plan that will be put in place. ”

The Plan: Gaza, having embarked with TVs. Maybe he will change in the coming hours. Meanwhile, the Dignity vogue. Engine noise makes deaf. The smell of fuel oil a little drunk. In front, nothing. The sea, just the sea.

(1) On board were three crew members, eight activists – Olivier Besancenot addition there are Nicole Kiil-Nielsen, MP, Europe-ecology, Annick Coupe, spokesman for the union Solidarity trade union, or Nabil Ennasr, President the Collective of Muslims in France – and a journalist, the author of these lines.

The earlier July 4 Liberte.fr article:

On board the “Dignity”, en route to Gaza

A French ship with a few activists on board, including Olivier Besancenot and Annick Coupé, eventually left Athens and headed to Gaza despite the obstacles. The “flotilla to Gaza” is reduced to its simplest expression. The story of our special correspondent on the deck of “Dignity.”

By QUENTIN GIRARD special envoy on the “Dignity”

“The pins in the plastic, it will not be possible,” said Olivier Besancenot, in full session yourself. 11 hours on Monday, in a small Greek port. The Dignity Al Kamara, one of two ships of the French committee for Gaza, left at dawn the creek near the industrial town of Salamina, where he had hidden for three days. In another cove where he made a first step, the passengers – including Besancenot, so – try to install the satellite antenna to communicate with the outside world.

3 o’clock this morning, Julien Rivoire, a member of the NPA and a spokesman for the campaign called “Wake the captain, we’re back.” Between them and the small annex that links with the boat, watchdogs of the port or adjacent businesses. They bark violently at night. They fail to wake the whole neighborhood. Tunisian Omeyyaa Sedic and Julien Rivoire, equipped with the latest load required, can not pass. Latest in a series of tragicomic events that marked the week of the fleet. “We’re not James Bond, it is OSS 117” is trying to be amused Julien Rivoire finally climbing on Dignity.

Plaisance

Sunday evening, the decision was made. It was long in coming, interspersed with calls to Iniohos Hotel where the rest of the delegation. A consensus is emerging: the Dignity attempt to leave no matter what. This small yacht 13 meters long, having left France ten days ago, has a status of “craft” and is theoretically not subject to the same prohibition to start than other boats of the delegation.

On Friday, an American ship tried starting one. Saturday, the captain was imprisoned. It could several years in prison for having left without permission. After several announcements bullies, to show their determination and their will as strong as ever to go to Gaza to bring humanitarian assistance, the committees have defected last one after the other. Masters of Spanish ships and Canada have announced that they did not want to take as many risks as they were sure they could not be more than thirty meters. The former president of Greenpeace France, Alain Connan, captain of the main French ship Louise Michel, after long hesitation, agreed with this position, some attracted by the Greek jails.

He went to ask permission to start at the harbor. Refused of course. The passengers were then organized a demonstration on the deck of Louise Michel. They simulated a departure. They should all file a complaint for obstruction of freedom of movement in the afternoon.

Parano

5 o’clock this morning, the Dignity springs. The sun is not up yet. Some cargo ships moving in the distance. Around him, two or three carcasses that rust for too many years, the ferry may be ready to leave but which seem, at dawn, desperate still. Twelve boats, twenty-two different nationalities and several hundred passengers announced, the fleet is now reduced to three crew members, eight militants – Olivier Besancenot addition there are Nicole Kiil-Nielsen, MP europe-ecology, Annick Coupe, spokesman for the union Solidarity trade union, or Nabil Ennasr, president of the Collective of Muslims in France – and a journalist, the author of these lines.

The Dignity enters the channel. In the distance, lights, shadows indistinct, but no coastguard. Surprise among the passengers. They believed they were identified and a small star suddenly arise between two cargo ships to stop them. For two days, each gull, each fishing boat, each jet-ski with the big guys who spend every man piss in the night under the white lights of the port is an opportunity when paranoid.

To starboard there. A port, nothing. In the distance behind, already, the lights of Athens. The sun appears between two hills. After a week of failure or disruption, and the blows of fate have joined forces to keep them in port, for the first time the French committee actually managed something in Greece. They feel like defeat stress, even if they are tired, even if the tension is palpable at times between them, although discussions and waiting endlessly sometimes not.

Determination

Of course, they know that this little boat is not much. That Israel, obviously, has won the game this time and that the only issue that remains is to show that they have tried everything, it’s not a “fucking failure”, as stated Besancenot. Certainly they know that it is unlikely to go to Gaza, especially alone. Unless a Greek ship to join them. The committee led by Vengelis Pissias announced that they had a new, third, a “surprise” that the authorities do not know. But they have promised so many things since the beginning of last week …

The Dignity vogue. It will reach international waters in a few hours if not arrested by the Coast Guard before. There, passengers will make official statements. They expressed their determination against the blockade of Gaza and denounced the attitude of the international community against them. They then announce the next steps. If there is a sequel.

June 25 Le Monde article:

Gaza flotilla II imminent departure

A year after the arrest of a murderer off the first convoy of Israel, a new international fleet prepares to sail to Gaza to try to break the blockade imposed on the Palestinian enclave. Unlike last year, two French ships involved in the operation.

The first of these ships, the “Louise Michel”, is currently in Greece. The second, “Dignity-Al Karama” sailed this morning from the Ile-Rousse in Corsica. I get on one of them and try to deliver on this blog Monde.fr the story of the expedition.

A campaign launched in October 2010

This project, called “A French boat to Gaza” would not be possible without the 600,000 euros of the money raised during the campaign launched in October under the leadership of the combined platform of French NGOs for Palestine and the National Collective for a just and lasting peace between Israelis and Palestinians.

Nearly 70 organizations (associations, political parties and unions) were involved in mobilization. From Lille to Marseille via Strasbourg, Toulouse or Alencon, speakers and activists around the country. Three-week tour in February. “It was a real success,” testifies Julien Rivoire, a member of the New Anti-Capitalist Party and the coordinating committee of the campaign. “It happened in the markets with a sound truck, banners, leaflets and a bank. In Toulouse, the Mirail, 600 euros were collected in two hours. It was during the Tunisian and Egyptian revolutions. There was a particular climate, people were saying ‘it is possible to make a difference “.

SNOWBALL EFFECT

Driven by this momentum, mobilizing snowballed, quickly exceeding traditional activist circles. Events, exhibitions, film screenings or symbolic release of paper boats … In the end, more than 1,500 events are held across France. Donations tributary. “We never imagined that the movement would take on such a scale,” comments Maxim Guimberteau, communications officer of “A French boat to Gaza.”

“I feel that this campaign has awakened people. A real fervor has replaced the fatalism that had won many former activists involved in the pro-Palestinian,” observes Alain Bosc, and member of the Cimade Coordinating Committee of “A boat to Gaza”. Very relayed in associations, the initiative has been enthusiastically received in poor neighborhoods and in particular “to the French families of Arab origin, sensitive to the Palestinian question and the fate of the inhabitants of the Gaza Strip.”

90% of individual donations

Many structures such as the Christian Catholic Committee against Hunger and for Development (CCFD-Terre Solidarity) or the Christians of the Mediterranean have also mobilized their networks. An appeal, launched at the initiative of the Archbishop of Sens-Auxerre and bishops of Troyes and La Rochelle, was sent to all dioceses to encourage the faithful “to a special place in their personal prayer and a community for the second flotilla of freedom to achieve its objectives in the service of peace. ”

The result of all collected 600 000 euros, 90% of donations come from individuals. According to organizers, “most people participated at 5, 10 or 50 euros.” Added to the contributions of the signatory organizations, grants from several local and payment of the foundation “A world for all.” All support checks were made payable to the Movement against Racism and for Friendship between Peoples (MRAP), which opened a special account to centralize. “Everything was done in a transparent, ensures the collective. We have not accepted money from foreign countries or associations.”

46 PEOPLE IN FRENCH VESSELS

The funds raised were allocated to the purchase of two vessels, the formation of crews, and communications expenses. “Chartering vessels is what has been the most difficult in the end, recognizes Alain Bosc. We’re not owners, there have been some setbacks.”

Finally, 46 people are expected on board. Alongside the militants of the various associations involved in the campaign, carrying several personalities from the political or voluntary, as Olivier Besancenot (NPA), the Communist deputy in Le Havre, Jean-Paul Lecoq, MEP Nicole Kiil-Nielsen (EELV) the Breton sailor Jo Le Guen, or Julien Bayou, the collective “Out of colonialism.”

From June 25 FRANCE3

The “Dignity-Al Karama”, a 19-meter boat flying the French flag, left the waters of the Ile-Rousse to 11:15. It must join in the next ten to twelve days boats that make up the flotilla to Gaza.

“The entire fleet will sail next week from various Mediterranean ports,” Julien Rivoire told AFP a committee member coordinating the French countryside. Ships, including two freighters carrying medical supplies, “should reach the port of Gaza at the end of next week,” he added. Among them, a cargo bought a quarter of France and the rest of Sweden, Norway and France, making the “Dignity” the only boat in the fleet entirely French.

“We hope we can do it so as to breach the blockade,” said Omeyya Seddik, a passenger on the “Dignity”, reached by telephone by the AFP, for whom “joy is the feeling that dominates the time of departure. “This fleet is part of “the natural continuation of the revolution for freedom and democracy,” in Arab countries, said Seddik, of Tunisian origin.

Before taking off, a passenger on the boat at the stern hoisted a Palestinian flag and made the “V” for victory.

Morons at AFL-CIO say AT&T/T-Mobile merger will benefit union workers

Posted on June 25, 2011 by Eric Verlo

That’s the problem with unions. Collective bargaining is key to making capitalists heed the people, but the big unions are co-opted by back- peddling idiots. Aka, counter-revolutionaries. The AFL-CIO praised this merger because the unionized AT&T will absorb the non-union T-Mobile workforce? Yeah, what’s left of the jobs. Increased monopolization means streamlined payrolls, more pressure to force concessions, and less leverage. In offering this endorsement of a proposed antitrust offense, the AFL-CIO takes its members for chumps. Remember the UFCW betraying the P-9 meatpackers, or the SEIU taking out the nurses’ union? Of course the Democratic Party is chiming in, claiming a merger will help gays, by the same tortured moron math. Americans need their unions, their own political party, and advocacy groups, but they have to start with taking a guillotine to the top. Finding his pro-corporate support uncharacteristic GLAAD members unmasked their leader. This can be a one-strike litmus test. Favor AT&T, mistaken or not, you’re out.

Cartographic traces of Lake, Colorado

Posted on May 10, 2011 by Eric Verlo

Maybe like me you’re wondering how a landmark falls off the face of the earth, in particular Google Earth, assuming as we do that web crowdsourcing is archival, not perishable. A stagecoach watering hole in Kansas Territory, formerly Arapaho, was Hedinger’s Lake, between present day Limon and Hugo. Like the history of Colorado’s water, Lake became Lake Station, later a railway siding, today a creek.

First some back-story: 1750. When gold looked to become the carrot to drive white man’s Manifest Destiny, the Indian Territories of what would become Colorado were labeled simply the Gold Region.

Back in 1815, the West was still La Louisiane, and place names were native, French and Spanish. Taos was one of the oldest Spanish settlements, site of the First American Revolution, against the Spaniards, and another revolt when the US invaded. Camp de Baroney sits on the Arkansas River, eventually resettled as El Pueblo. And there’s La Fourche Republicaine, a fork of la Rivoire Missouri, soon to lead a prominent migration trail west.

By 1848, St. Vrain’s Fort and Grante Ft., Bent’s Fort, were already protecting Anglo trading interests. (Note by the way, Old Park and New Park, eventually to be become the “North” to South Park.)

By 1864, the Cheyenne and Arapaho found themselves bordered on the west by the “Military Department of Utah” and ceding their lands to the Kansas Territory. (On this map we can see Montana City, the original Denver City. Denver eventually overtook Auroria and the metropolis. Mineral Springs became Manitou and Colorado Springs at the foot of Pikes Peak.)

Note the curiously singular representation of a “Kansas Lake” depicted at the tip of the south fork of the Republican River, whose waters will originate in the later to be named Lincoln County, at whose heart will lie Lake, Colorado.

The Rocky Mountain region lost many lakes by the mid 1800s when beaver were hunted to near extinction and with them the beaver dams. Note just West of “Kansas Lake” lies Beaver Creek.

With the gold rush, settler trails crisscrossed the West, for wagon trains, stagecoach and mail carriers. Lake was a stage at the convergence of the Butterfield Overland Dispatch and Republican Fork Trails, where they crossed the Big Sandy Creek to join the Smoky Hill South and North Roads (after similarly named rivers which were starting points in Kansas) or the spartan Starvation Trail to Denver. Today’s I-70 follows Smoky Hill North.

Was Hedinger’s Lake the water which travelers sought at the end of the South Republican Fork Trail?

This 1868 Union Pacific map predicted the stops heading eastward from Denver to be Parkhurst, Beaver, which later became Deer Trail, and Coon Creek, which became Kit Carson, opposite Sand Creek.

By 1870, Kansas was a state and the Kansas Union Pacific RR reached Denver. (Beyond the mountains: North Park, Middle Park and South Park.)

By 1873, leaving for Denver from Fort Wallace, there were stops at Kit Carson, Aroyo, Lake, Agate (pronounced “A-Gate”) and Deer Trail. (Note: still no Colorado Springs.)

A map circa 1880s, shows Hugo, Lake, River Bend, Godfrey, Agate, Deer Trail, and Byers, named for the founder of the Rocky Mountain News, formerly Bijou.

When the Chicago Kansas and Nebraska Railroad sought a direct route to Colorado Springs, it decided to intersect the Kansas Pacific at a new stop called Limon and that was the end of Lake. At Limon the westbound trains performed what was called the “Limon Shuffle” where passenger and freight cars were separated depending on which were going to Denver and which to Colorado Springs.

Lake Station remained a stop for the Union Pacific, and on this map which accompanied the 1910 census, it’s gone, in favor of a late addition, Bagdad.

As trains no longer needed to take on water, and could reach their destinations more quickly, many stops were eliminated. This 1925 train Union Pacific train schedule lists only Cheyenne Wells, Kit Carson, Hugo and Limon before reaching Denver.

Lake is still marked on railroad maps, though there’s not even an access road to reach it.

On other maps it’s just Lake Creek, spanned by an impassable decaying bridge. It’s now a wetlands area that provides a bird sanctuary.

For the USGS, Lake still serves as namesake for the topographical map of the Lake Quadrangle.

To be continued…

Bahrain King Hamad fells monument at Pearl Roundabout to efface revolution, also so his hanging won’t be iconic

Posted on March 22, 2011 by Eric Verlo

The prevailing talking point on Bahrain’s King Hamad bin Isa Al Khalifa is that he’s a “good man.” So is his son the Crown Prince, apparently both “good men,” which stands at odds with the ongoing murderous repression of their fiefdom’s pro-Democracy demonstrators and the doctors trying to save them. How genteel an argument, to dismiss reports of massacres, arrests and beatings out of hand, because their reality would simply be too out of character to be believed. Media spokesman for the proto-Saudis and their Western Boyars assure viewers the news is inherently inconsistent with the much-self-beloved royals. How does that square with the sudden calculated move to tear down the monument at the center of the Pearl Roundabout which had become the iconic symbol of Bahrain’s popular uprising and its resilient demonstrators? Oh the sculpture resembled less political symbolism than cake decoration, the usual garish erection by born-in-a-tent nouveau riche. But what are we to conclude was the king’s benevolent motive? A sudden aesthetic enlightenment” I would advise the self-bolstered monarch to fell every structure in Bahrain from which his subjects might be able to string a noose.

Yahoo empire blinks on Libya!

Posted on March 18, 2011 by Eric Verlo

Saddling up, out of the shadows of covert participation in the Libyan rebellion against bogeyman Gaddafi might be the US misstep which the Arab movement has been looking for. It’s not enough that Barack Obama’s active suppression of public uprisings in Bahrain and Yemen unmasked his administration as anti-Democratic, now he’s deploying the brute force already visited on Iraq. Bombs against Gaddafi will soon enough yield innocent civilian deaths and America’s War on Islam not only expands in North Africa, it pits itself against the entire pan-Arab revolution. The Qatar-based Al Jazeera Network may have its own motives for beating the drums of war against the loose cannon madman Gaddafi, while sparing the House of Saud similar vilification, but AJ has succeeded in goading the Western powers to put their weapons where their oil is, effectively throwing fuel on a fire that was stalling against the firewall of the dictator’s repressive might. Forget Ben Ali, Mubarak and Gaddafi, the adversary to unite Arabia will be the USA. And while conventional wisdom for Western governance is to announce unpopular policy during the black hole Friday news cycle, our arrogance shows itself tone-deaf to Islam. We might have figured it out watching what happened in Egypt’s Tahrir Square. The secular week-end in the West can erupt as Days of Rage after the reflection of Friday Prayers.

At the feet of Pan-Arabian Revolution, US activists show their stripes: yellow

Posted on February 22, 2011 by Eric Verlo

So-called respected activists in the West are weighing in on what’s next for the pro-Palestinian struggle. Based on their informal survey of comments and tweets of unknown provenance, the conclusion being reached is that Egypt needs a breather, that Egypt’s new Junta needs time to show its hand, before international efforts to relieve Gaza should resume. This, in vivid contrast to the activists of Pan-Arabia who know to strike while the iron is hot. Not only do Americans and Europeans have naught a trace of the courage shown by our North African allies, we don’t even have the stomach to see them rise to the occasion again. Prudence we caution, but who are we to pretend expertise on the matter? Where have well respected organizers got the Gazans so far? No one’s questioning best intentions. Tahrir Square #Jan25 means you’ve been served. Stand the fuck up, or shut it.

If you have to ask for whom the fat lady sings, it is not for Tahrir Square.

Posted on February 14, 2011 by Eric Verlo

–And to really mix my malaprops, she sings for them that bought her. If there was one variable which got away from the underdogs of Egypt’s Jan25 Revolution, it was who would referee the endgame. While Hosni Mubarak’s stunning defiance Thursday night looked like a Hail Mary pass hoping to provoke the protesters to mayhem, as a defensive strategy he was moving the goalposts. Anticipating a capitulation, the Tahrir Square demonstrators made clear it was the entire regime which needed ousting, no Suleiman, no Emergency Law, an inviolate list of demands. Mubarak’s insulting buffoonery focused the great beast’s wrath like a rodeo clown. When the announcement came he was stepping down, who could not help but raise a cheer, drowning out the earlier precautions. Mubarak played Egypt like a fiddle, as he burned it, while the fat lady of state media called the game over.

It’s not over until the fat lady sings
So opera advises American football, in reality a game governed strictly by elapsed time. The expression describes the mutual sense that every competition has a natural denouement. Actually another false notion, as this feeling is not often shared by the side fallen behind at the final score.

I’ve convoluted ask not for whom the bell tolls– and if you have to ask how much it costs–, Hemingway and Bugatti I believe, to stress the obvious, that Wagnerian sopranos are kept in furs by the wealthiest of patrons. As epic as might be your struggle, unless you transcend the stage to torch the theater, the status quo raises and lowers the curtain. Without seizing the state media, if even that had been possible, and without staging a narrative to compete with Mubarak’s Greekest of tragic high dives, the Tahrir Square revolutionaries became mere players to please the king.

How could we have missed the grand theatricality of Mubarak’s televised last stands, lighting and makeup dialed to Bela Lugosi? Anyone who knows to dramatize a campfire tale by holding a flashlight under his chin also knows they don’t do that for their profile pic.

In all three of his televised responses to the Jan25 reformers, Mubarak could be paraphrased to have said “over my dead body.” It was a road map his adversaries probably should have heeded. Where is Mubarak now? He’s not gone, he hasn’t even left Egypt. We are informed Mubarak has stepped down by the same henchmen who told protesters “all your demands will be met,” then meeting none.

We learn now that Egypt’s Supreme Council of the Military is trying to clear Tahrir Square. It’s outlawing those who would cause chaos and disorder, and forbidding labor unions to assemble or strike. It’s refusing to end Egypt’s emergency law, or to release the unknown thousand detained during the protests. What of Suleiman and the regime’s other cronies? We have only Mubarak’s doppelganger in an army cap. Field Marshall “Happy” Tantawi, takes to the microphone with no other agenda it appears than to restore Egypt its accustomed sonorous normalcy. If Tibetan throat-singing has an antecedent we can wager now it was Pharaoh throat-talking.

Dance with the one who brought you
A mantra worth cursing out, when Americans wonder why their elected representatives answer only to their biggest campaign donors. So why would Egypt’s Jan25 upstarts have banked on winning the cooperation of the army? I almost said “their” army, but it’s bought and paid for by Mubarak, actually by the same interests who buy US politicians. Deciding not to challenge the army spared lives, but it’s left the military regime in place. Regime unchanged.

There’s a problem when you harness the protection of the military without knowing the intentions of its leaders. You can win a nonviolent revolution against the schoolyard bully if you’ve got the deterrence of “My Bodyguard,” but when the army does that on a national scale it’s called a “bloodless coup.” I’d be curious to know if nonviolence cultists rank bloodless coups among behaviors they condone.

Egypt’s April 6 Youth Movement, chief instigators of the Jan25 uprising, attribute much of their organizing skill to training with OTPOR, the famously successful Serbian youth rebellion which ousted a Balkan despot. OTPOR is now a “pro-Democracy” consultant group that tours the world to awaken nascent freedom-seeking insurgents aspiring to popular uprisings. OTPOR refutes insinuations rising from the disclosure that it has accepted CIA funding, but curiously OTPOR is more often by happenstance advising malcontents in Venezuela, Bolivia, Equador, Iran, the usual outspoken rivals to US hegemony. What are they doing in Egypt? Had Hosni Mubarak gone rogue and we didn’t know it?

When pan-Arabists think of events in Tunisia and Egypt igniting popular uprisings across North Africa and the Middle East, there’s a line to draw between the common dictators and those more hostile to the West, whose rule is autocratic by necessity of having to defend against CIA and Mossad activities designed to foment instability.

Whether against anti-US foes or pro, it might be safe to say that OTPOR talks a good game, without having yet had a victory. They too deposed a dictator, but not his regime. The problem with OTPOR’s advice has to do with the end game.

I sat in on an OTPOR seminar once. They make a yearly visit to Colorado College to lecture for the nonviolence program. At the conclusion of one lecture I witnessed a tremendously telling aside, which emerged during the Q&A, and definitely wasn’t in the nonviolence syllabus. I wonder if the A6YM got the memo.

This presenter, a veteran of the student uprising that deposed Slobodan Milosevic in 2000, contended that after this victory for Democracy, etc, etc, after the attention span of the media had moved on, the same Milosevic cronies who’d been driven to the shadows, assassinated the opposition leaders and crept right back to power. His lesson, a mere thesis, which I paraphrase to reflect his muted emphasis: we should maybe have taken it one step further and made sure to kill the fuckers.

A6YM is still gambling they can separate the lower ranks of the army from the brass. If Robert Fisk’s report that Egyptian tank commanders refused January 30 orders to make a Tiananmen Square out of Tahrir, there may still be hope in such a strategy. But it certainly won’t work if no one will announce that it has worked. If a tyrant falls in the forest and no one hears, his rule doesn’t fall. The funeral cortege of Genghis Khan killed everyone in its path to keep word of his death from spreading across the empire until his successor could consolidate power. If you’re not going to push him off the cliff literally, perhaps Slavoj Zizek is right to say you’ve got to create a Tom and Jerry moment where despots like Mubarak see that there is no longer any foundation beneath him, where visualizing his own demise brings it upon himself. But can that be done without having director’s cut over the narrative?

What kind of farce are we perpetuating to pretend that Hosni Mubarak must be granted a dignified exit? What dignity commanded firing on unarmed protesters? Are we to pretend men who torture to retain their power can be cajoled to release it?

Instead, the Egyptian rebels find themselves with no ground beneath their feet, their “victorious revolution” now a meme being used to rally dissenters against America’s chief adversary Iran.

Poetry of Barack Obama invokes MLK but pays true homage to Rod McKuen

Posted on February 13, 2011 by Eric Verlo

Jesus what a bore! Remember when SNL lampooned Sarah Palin’s first prime time TV interview by reenacting it verbatim? They could do that with Obama’ humorless addresses, I think it would make great theater, but the joke’s already abysmally old. Maybe we need a drinking game where everyone paying close attention could drink the moment President Obama mouthed a phrase that wasn’t a cliche or platitude. Alright, not a drinking game.

At least George Bush punctuated his utterances with inanities, funny ones. We appreciate Sarah Palin for the same preposterous gaffs. Obama’s meaningless drone is similarly inane really, divorced from meaning but colorless.

I had to revisit Obama’s Mubarak-steps-down speech to see if there was anything there. His usual podium bedside manner now hits me like chloroform. I’m not sure if Obama’s tennis ball red-state blue-state head swings aren’t calculated to hypnotize, or if the vacuity of his bombast is the prescribed anesthetic.

At first I was going to reprint the speech with the cliches highlighted. I opted to simply reformat it like a poem, putting the carriage return after each cliched platitude. I’ve parenthesized phrases which in Star Trek or ER scripts are called tech-speak, expository details whose particularities are actually irrelevant.

I’ve neither added, nor subtracted from this official transcript. I can hardly believe it myself.

There are very few moments in our lives where we have the privilege to witness history taking place.

The people of Egypt have spoken.

Their voices have been heard.

And Egypt will never be the same.

(By stepping down, President Mubarak)

responded to the Egyptian people’s hunger for change.

but this is not the end of Egypt’s transition. It’s a beginning.

I’m sure there will be difficult days ahead and

many questions remain unanswered.

But I am confident that the people of Egypt can find the answers,

and do so peacefully, constructively, and in the spirit of unity

(that has defined these last few weeks, for Egyptians have made it clear that)

nothing less than genuine democracy will carry the day.

Well, that’s just the opening paragraph. Obama follows it with more expository blah blah blah. He begins by crediting the nonviolence to Egypt’s military, instead of the incredible restraint of the student protesters.

The military has served patriotically and responsibly as a caretaker to the state and will now have to ensure a transition that is credible in the eyes of the Egyptian people.

You’ll note Obama is advising the military on appearances — very likely his definition of “meaningful.” He continues by listing the demands of the Tahrir Square demonstrators, without crediting them, as if this list was his own.

That means protecting the rights of Egypt’s citizens, lifting the emergency law, revising the constitution and other laws to make this change irreversible, and laying out a clear path to elections that are fair and free.

And then it’s a return to platitudes, encapsulating the admonition that Egyptian forums must give access to secular, “pro-democracy,” pro-Zionist pro-globalist concerns.

Above all this transition must bring all of Egypt’s voices to the table for the spirit of peaceful protest and perseverance that the Egyptian people have shown can serve as a powerful wind at the back of this change.

While he has you almost gagging Obama counterattacks with something to blow your drink through your nose. Obama promises to be the kind of friend to the newly free Egyptians that only the day before was supporting their oppressor Mubarak, and promising there’s more help where that came from.

The United States will continue to be a friend and partner to Egypt. We stand ready to provide whatever assistance is necessary and asked for to pursue a credible transition to a democracy.

And back to cliches:

I’m also confident that the same ingenuity and entrepreneurial spirit that the young people of Egypt have shown in recent days can be harnessed to create new opportunity, jobs and businesses that allow the extraordinary potential of this generation to take flight.

Isn’t this the same war-on-the Future speech he’s peddling to his domestic audience?

I know that a democratic Egypt can advance its role of responsible leadership not only in the region but around the world.

Oh you can read the rest for yourself. I’m bored.

Egypt has played a pivotal role in human history for over 6,000 years. But over the last few weeks the wheel of history turned at a blinding pace as the Egyptian people demanded their universal rights.

Alright, one more interruption. Below Obama describes watching events of the Egyptian Revolution, AS IF it was a shared American experience. The irony of course is that he watched it on Al Jazeera, while the rest of America could and did not. They would be at pains to draw the same sympathetic conclusions as he. Obama comes off quite the perceptive, humanitarian bastard.

We saw mothers and fathers carrying their children on their shoulders to show them what true freedom might look like. We saw young Egyptians say, for the first time in my life I really count. My voice is heard. Even though I’m only one person, this is the way real democracy works. We saw protestors chant… ‘We are peaceful, again and again.’

We saw a military that would not fire bullets at the people they were sworn to protect. And we saw doctors and nurses rushing into the streets to care for the wound. Volunteers checking protestors to ensure that they were unarmed. We saw people of faith praying together and chanting Muslims, Christians, we are one. And though we know the strains of faith divide too many in this world and no single event will close that chasm immediately, these scenes show us that we need not be defined by our differences. We can be defined by the common humanity that we share.?And, above all, we saw a new generation emerge, a generation that uses their own creativity and talent and technology to call for a government that represented their hopes and not their fears. A government that is responsive to their boundless aspirations. One Egyptian put it simply — most people have discovered in the last few days that they are worth something, and this cannot be taken away from them anymore. Ever.

This is the power of human dignity, and it can never be denied. Egyptians have inspired us, and they’ve done so by putting the eye to the idea that justice is best gained through violence. For in Egypt it was the moral force of nonviolence, not terrorism, not mindless killing, but nonviolence, moral force that bent the arc of history toward justice once more. And while the sights and sounds that we heard were entirely Egyptian, we can’t help but hear the echoes of history, echoes from Germans tearing down a wall, Indonesian students taking to the streets, Gandhi leading his people down the path justice. As Martin Luther King said in celebrating the birth of a new nation in Ghana while trying to perfect his own, there’s something in the soul that cries out for freedom.

Those were the cries that came from Tahrir square and the entire world has taken note. Today belongs to the people of Egypt, and the American people are moved by these scenes in Cairo and across Egypt because of who we are as a people and the kind of world that we want our children to grow up in. The word ‘Tahrir’ means liberation. It’s a word that speaks to that something in our souls that cries out for freedom. And forever more it will remind us of the Egyptian people, of what they did, of the things that they stood for, and how they changed their country and in doing so changed the world. Thank you.

Egypt revolution is victory 4 Democracy but credit for Tahrir goes to Anarchism

Posted on February 11, 2011 by Eric Verlo

For a few interminable minutes there, okay– days –and bloody, millions of Egyptians had taken to the streets rejecting the legitimacy of Egypt’s authoritarian regime. The despotic Mubarak refused to budge and experts deemed the outcome a “stalemate.” Really? A preponderance of citizens greater than most voter turnouts, versus an unmovable leader, and commentators want to call it a draw? Worse is overlooking the obvious about the leaderless opposition forces. Jan25 came together to demand freedom, which the West equates with Democracy. But the Egyptian activists accomplished it through Anarchism. The West fears the Muslim Brotherhood, but the real banned party is the anti-globalist youth movement whose name must not be spoken. When President Obama pretends the US will shepherd Egypt through its “transition” he is sidestepping the real epiphany of Tahrir Square, a people united by idealism, minus a government. “Anti-government” protesters, precisely.

Egypt’s protesters are owed 302 lives

Posted on February 11, 2011 by Eric Verlo

After Hosni Mubarak did his best last night to bite his thumb at his gaping-mouthed subjects, the heart of humanity aches in anticipation of the potential of angry bloodshed Friday in the streets of Cairo. Egypt’s JAN25 organizers have so far held steady to a winning strategy of nonviolent protest, in spite of the tremendous state repression, and as yet it’s only moved them forward. But Mubarak has proved that the success of demonstrations is not judged by public opinion. Revolutions very traditionally involve an overthrow. Despotic torturers rarely capitulate to appeals to their conscience. Before the revolutionaries can ensure the universal support of the Egyptian people, they will have to commandeer the state’s propaganda machine. Hopefully sympathetic employees will turn it over without forcing the demonstrators to compel its silence. While it might be prudent to guard against provocateurs inciting mayhem, public audacity wanes without momentum. Let’s not discount the gains which the brave youth of Jan25 have won with violence. Tahrir Square would not have been gained without wave after wave of assaults against the ranks of riot police. Returning the thrown stones was the only action which kept Mubarak’s goons from overtaking Tahrir and slitting everyone’s throats. Whether Egypt’s freedom-seekers this Friday take the high road or the low, under fire from Mubarak’s security goons, we must support them.

Egypt = Gaza

Posted on February 5, 2011 by Eric Verlo

It’s an open air prison, a police state where all opposition voices are arrested. Our press is reporting the arrest of foreign journalist, what about the murder or disappearance of the #Jan25 organizers. On Thursday after a leadership consultation with Mohamed ElBaradei, the internet coordinators of the Tahrir Square uprising were arrested as they left ElBaradei’s house, with four further members of the April 6 Youth, a list of missing which now includes: Amr Salah, Shady El Ghazaly Harb, Naser Abdel Hamid, Ahmed Doma, Amr Ezz, Mostafa Shawky, Mohamed Arafat, Amal Sharaf.

Crowd builds in Al Tahrir Square, Cairo, two million defy Mubarak intimidation

Posted on February 4, 2011 by Eric Verlo

Al Jazeera has reasserted live footage in Cairo today, for the Friday demonstration billed as “Day of Departure” meant to depose dictator Mubarak. Already gone are the US major network talking heads, fleeing in advance the predicted mayhem as if to dot the exclamation point of their Chaos in Egypt meme. Alas, they won’t be here to offer color commentary on the hundreds of dozens of demonstrators of indeterminate religious-political orientation massing for Egyptian on Egyptian rioting. For the rest of us, this is a veritable revolution before our eyes. Perhaps the monumental event of our lifetime. Regardless the outcome, most of us are probably so estranged from reality to recognize it. This is what Democracy looks like.

We only know representative democracy, warped beyond recognition by an electoral college system only a statistician’s mother could love. Switzerland is the only direct democracy we’re taught in school. But democratic participation in Switzerland is not much more complicated than a homeowners association in an affluent neighborhood. People power taking to the street, denouncing the illegitimacy of its authoritarian masters, leaderless, allied, that’s real democracy.

What a shame the American celebrities are missing the party. Williams and Couric fled with the expat community, Amanpour is already giving her veneer of respectability to the next interviewee, Zuckerberg not Assange, because the corporate media wants to call this a Facebook revolution sooner than Wikileaks’. Anderson Cooper is cowering on the hotel floor of an undisclosed location, unafraid to confess that he’s fearing for his life, working that [brown] people-are-revolting angle.

On the heroic independent media side, Democracy Now! correspondent Sharif Abdel Kouddous spent the night in Tahrir Square, sleeping among the activists, half of them with bandaged heads, waking at intervals by the alarm sounding for anticipated stone-throwers.

None of the network journos showed any hesitation to criticize the harassment they encountered on the streets, though blaming Mubarak’s thugs was never explicit, and none of them veered from celebrating the riots as “Egypts killing each other.” Even Al Jazeera pretended to confuse the Pro and Anti sides, failing to discriminate between the side which was armed from the side taking cover, the knife wielders from desperate stone throwers trying to keep their attackers at bay.

Finally this morning an AJ text crawl mentioned 300 fatalities since the protests began January 25th, otherwise there has been scant mention of innocent civilians killed, some of them shot in the head by nighttime snipers.

All of the networks, even Al Jazeera express their incredulity that the demonstrators project no central leadership, failing to speculate why that may be.

Al Jazeera takes care to mention, every time they consult one of their three correspondents on the ground, that they omit speaker identities “for their own safety.” Even when they interview activists, the AJ anchors thank them for being brave enough to reveal their real names. Not discussed is the certain probability that calling out a demonstration leader will direct the security apparatus to deploy their snipers, summary arrest, or detention of family members. As the media wax horrific the barbarity of Cairo’s street culture chaos, they maintain a rudely unrealistic civil pretense to mask Egypt’s cruel police state.

My nightmare scenario, now that I’m looking over millions of peaceful undaunted Egyptians chanting for deliverance from their uncaring dictator? I worry about the US advisors reported to have flown into Cairo this morning, reassuring their cabby, it was reported, that everything was going to be fine.

I worry that Washington has spot on advice to offer Mubarak about how to respond to a “million man march.” After all, that’s old hat for DC. Let ’em eat waffle cake.

American protesters get the same response from Obama as they did from Bush 43. Praise for the glorious display of citizens exercising their constitutional rights. Talk away, shout it to the rooftops. Feel better? I hear you America. Thank you for your faith in the system. You are the change you’ve been waiting for. Please collect your refuse on the way out. Be sure to leave something in the hat to cover the expense of the Port-a-Johns. Thank you America, I’m honored, really. Yes we can, see you at the polls in 2012. Thank you for flying Air of Democracy. Bu’bye.

	LL on Owl City writes lyrics most fo…
	lizzie on The ‘success maker…
	gary cummings on Common Dreams? Or is it censor…
	kennetha on The Stiles Unit of Beaumont
	Cristian on Shlomo Sand and shattering a n…
	Vic Currier on Why should you attend the Denv…
	Vic Currier on Sovereign constitutional oath…
	Robyn KenyaStar Prui… on White Native Americans
	Debra Gill on The Stiles Unit of Beaumont
	Xaldyn on The ‘success maker…

Not My Tribe

The Myth of Middle Ground

Tag Archives: Revolution

Revolution at 2112 RPM

Every dollar wants to be free of the Fed

Pseu Pseu Pseudo-Do-Dah-Day

#OccupyDenver gains speed in spite of counterrevolutionaries hitting brakes

Yer in the Army Now….

NY #OccupyWallStreet protest is going to be this generation’s Woodstock. Are you going to miss it?

The revolution will not be televised, emailed unfiltered, or allowed to trend on Twitter, but it’s starting without you

Organize, but think outside the school

Oslo bomber was less Christian Jihadist than Dexter, Arrested Development

Are you there God? it’s me Anders. The impersonal diary of Oslo Bomber and Mass murderer Anders Behring Breivik.

Slavoj Zizek Not Gaga for Pop

French craft DIGNITY breaks for Gaza, leads Flotilla II until rest allowed to go

Morons at AFL-CIO say AT&T/T-Mobile merger will benefit union workers

Cartographic traces of Lake, Colorado

Bahrain King Hamad fells monument at Pearl Roundabout to efface revolution, also so his hanging won’t be iconic

Yahoo empire blinks on Libya!

At the feet of Pan-Arabian Revolution, US activists show their stripes: yellow

If you have to ask for whom the fat lady sings, it is not for Tahrir Square.

Poetry of Barack Obama invokes MLK but pays true homage to Rod McKuen

Egypt revolution is victory 4 Democracy but credit for Tahrir goes to Anarchism

Egypt’s protesters are owed 302 lives

Egypt = Gaza

Crowd builds in Al Tahrir Square, Cairo, two million defy Mubarak intimidation