Most relevant perhaps is that Breivik is a veteran of the occupation of Iraq. You wonder if Norway will now think hard about its role in the continuing occupation. Maybe sending its mercenary-mentality personalities to sow their oats in a war zone contaminates more than their young men’s consciences.
What the media is calling Breivik’s “manifesto” is mostly copy-and-pasted information he gathered from the net: the history of the Knights Templar and lots of how-to for aspiring allies. We’ve bypassed the explosives how-to to present the account of his day to day travails, including this gem, Day 70:
However psychologists will choose to describe him, Breivik isn’t stupid, or religious. We’ve annotated this excerpt by highlighting some of the cultural supplements with which Breivik was augmenting his diet, with intentional consequences and perhaps not.
April – 2011
On April 6th I leased a car (short term lease), from AVIS; a silver grey Fiat Doblo van with 735kg of carrying capacity. They would charge my credit card with 810 euro per month. I needed this car as I had an introduction meeting with a farm owner the next day. I removed all the AVIS insignias so the car would pass as my own.
I had previously made initial contact with the owner of an appropriate farm through an online real estate forum for farms etc. At this point in time I had regularly searched for farms with 30-100 decare of farmland the past 6 months and had around 10 potential leads, all within 4.5 hours driving from the capitol [Oslo].
I had an introduction meeting with the owner, Petter and his girlfriend Tonje, around April 7th. They were around 37 years old and it turned out Petter was renting out the farm for the next 2.5 years due to the fact that he was going to jail for the specified period. He was reluctant to state exactly what he was being incarcerated for but he mentioned something about renting the place to someone who had used it as a marijuana farm. So I assumed that he was somehow implicated. I presented myself in an optimal way and it paid off; the couple seemed to love me, considering me to be the ideal candidate. It is times like these that your acquired experience/competence in sales will pay off. A good salesperson is also a very talented psycho-analyst. So it’s all about identifying the persons pains/problems/worries and saying what the individual wants to hear.
I wanted to move in as fast as possible, for example from April 1st, but as he was scheduled to leave for prison on April 19th and Tonje wanted to live there until May 1st, this wasn’t a possibility. Petter came to Oslo on April 10th and we signed the contract. I was now significantly closer to initiating the manufacturing phase…!
At this point in time I lived with my mom, in order to conserve as much of my funds as possible.
On April 9th, I was inflicted with a virus by my mother and I came down with something that later appeared to be a very resilient throat infection. FFS, this is what happens when you live with people hanging out with hypochondriacs…! It was the third time she had infected me the last two years and I was very pissed off and frustrated. The manufacturing phase was SO close, in only 20 days and now I’m potentially neutralized for the next three weeks… I decided to ride the illness out as I thought it would pass within the week, but it proved to be very resilient. My energy levels dropped by more than 50% and I eventually ended up with an antibiotics treatment.
It was now April 25th and I was finally back to normal. I had spent the past couple of weeks playing through Dragon Age II and a couple of other newly released games. Awesome! The good news was also that I would be practically immune to any bacterias and viruses for the next 3 months, in the most critical of all phases, as my immunity system had been boosted and rejuvenated significantly by the virus. My training regime had suffered and I had lost a couple of kilograms of muscle mass but most if not all other practical things were now in place for the manufacturing phase.
On April 27th I made the order for the fertilizer which were to be delivered a week later. Prior to making this order I had officially registered my company as an agricultural entity, with emphasis on the growing of specific crops, and I had gotten my official production number (a farming number) allowing me to make orders from the national farming supplier. If they were to screen me they would see that my company was linked to a farm that had 90 decares of fertile land so all was well.
The last week in the capital I spent a lot of time with friends, partying and attending various social events. I knew that it would be the last chance, for a very long time, I would enjoy their presence.
I had somewhat of a liquidity problem though, as I had to transfer a deposit equivalent to three months rent – 3,750 euro in addition to the rent for May; 1,250 euro.
This payment ate up a great deal of my remaining liquidity so I would shortly solely rely on my 10 credit cards with a total of 29,000 credit… As the weekly cap on all credit cards are capped at around 800 euro, I started withdrawal of funds from 3 cards.
Events on the farm from May 2nd 2011 to June 23rd 2011
This log contains a lot of what can appear as “wining” but it serves to reflect my mental state during the stay, a relatively detailed log of events and how I overcame the obstacles that arose. It can also serve as an educational guide or a blueprint for which the goal is to create a more efficient time budget. Learning from other people’s mistakes is always preferable to making them all yourself. It should be possible to drastically reduce the time spent on preparation, assembly and manufacturing based on the experiences shared in this log.
Monday May 2 – Day 1:
I drove up to the farm (2-2.5 hours from the capitol) with my newly leased Fiat Doblo with all the equipment and gear/clothing I needed. I spent most of the day moving and getting my equipment and gear into place.
Tuesday May 3 – Day 2:
I built the fume hood from the PVC plates and screws that was enclosed in the box. It was like an IKEA set and after a few hours I had completed it. Despite of the suppliers assurances they had forgotten to include the 10 cm diameter plastic fume hood tube so I wasn’t able to plug in the dust collector fan. I placed the hood on a regular 50 cm wooden living room table. I placed the 25kg heavy fan on a 1.5 meter high shoe shelf that I just flipped over. I placed it next to one of the living room windows so that I could cut out a plastic sheet using the same measurements as the window. I opened up one of the windows and taped the plastic sheet with duct tape on the window frame and cut a 10cm diameter hole where the tube was supposed to come out. This is the optimal way of doing it as you won’t have to cut in the wall or other surfaces.I would have to pick up a bendable vent tube tomorrow. I also covered the rest of the windows with curtains to block anyone trying to peek through. The fume hood was a very simple construction so if I had more time I would probably just build one myself and save 500 euro in the process.
Wednesday May 4 – Day 3:
Finished creating the metal skeletons for the blast devices and completing other practical issues relating to gear and equipment.
Thursday May 5 – Day 4:
I started to grind the aspirin tablets today, at first using a mortar and pestle. After a few hours my hands hurt and I realized this method wasn’t going to work out for this quantity. I decided I wanted to try an untraditional method by pouring the tabs on a large plastic sheet on the floor, using gravity to crush them with my 20kg dumbbell. This method worked excellently and I was done in about 4 hours. Tonje, the owners girlfriend, called me that evening. Apparently she was taking a 2 week vacation to Gabon and she was leaving this Monday. What a blessing! She said she would come and pick up some equipment from their storage room in the barn once she came back. I reckon I can manage to complete everything within the next two weeks, providing I work hard and efficient!
Friday May 6 – Day 5:
Started to synthesize acetylsalicylic acid from aspirin. Failed badly and ended up with converting the acetylsalicylic acid to worthless salicylic acid goo (at this point in time I didn’t know it was salicylic acid but It seemed very difficult to dry the substance). The guide I was using was significantly lacking. I realized I didn’t have any other contingency plan and I began to somewhat panic. As I was unable to find any solution online the next two hours I began to lose heart. As I had discarded my digital library of explosives guides I tried to locate guides, searching online with anonymizer software, for a completely different booster compound. As I realized that this task could take a week or maybe two my motivation and morale at plummeted. If I couldn’t even synthesize the first phase of the easiest booster how on earth would I manage to synthesize DDNP?! My world crashed that day and I tried to develop an alternative plan. 
I went to a restaurant in the northern town that evening and enjoyed a three course meal. I later watched a few episodes of “the Shield”.
Saturday May 7 – Day 6:
The only rational approach to this problem is to search online until I find a proper guide to synthesize aspirin powder into pure acetylsalicylic acid. After several hours of research my findings were extremely discouraging. All the guides I had found; mainly university level chemistry projects, required a suction filter pump and a chemistry air dryer. The even more discouraging news was that even with this equipment none of the university students managed to get a better yield than 30%! Omfg, this would mean that even with the equipment I would never acquire, my total yield would not surpass 30% which would severely cripple the overall plan… I went to another restaurant that evening (I find it an effective method for getting my morale up) to create a new plan. In any case; I appear to be fundamentally fucked If I cannot manage to find a solution soon.
Sunday May 8 – Day 7:
Failure is not an option for me. I continued my search on methods for the purification of salicylic acid online. After many hours of searching the net, using various search phrases, I managed to locate a single YouTube clip, with very few hits, which explained in detail an unconventional method for synthesizing acetylsalicylic acid from aspirin. However, the guy was using a suction filter pump and a laboratory air dryer but I figured I could bypass this requirement by using more funnel filters and by using an air drying method. According to the guy on the movie, he managed to achieve a 70-80% yield! This method seemed to be viable and I would try to create a batch the next day.
Monday May 9 – Day 8:
I tried the unconventional method for synthesizing acetylsalicylic acid with a promising result. I couldn’t actually confirm that the product I had was in fact purified acetylsalicylic acid so should I take a chance and manufacture it all using this method? Considering the fact that I had wasted so much time, I decided that I had no other choice than to initiate mass production even though I risked ruining all my aspirin. Because if I were to wait for a small batch, It would simply take too long, so I had no other choice than to take this calculated risk.
Tuesday May 10 – Day 9:
Considering the fact that I had wasted so many days and literally been at a standstill I felt a sudden need to create an evacuation plan as I didn’t have any. What would I do if the owner’s wife caught me, or the neighbor or anyone else? I needed to work out a plan for this potential scenario. The evacuation plan involved a 10 minute evacuation. I would have to pack my largest backpack with survival gear and related equipment, including survival rations, 10L of water, weapons, ammo and suitable clothing. I started to prepare the above.
Wednesday May 11 – Day 10:
I completed packing an evacuation kit. I felt a lot more safe and prepared for any emergency once I was done. When I returned from the southern town later that day, I saw two military 12 man teams, armed to the teeth, just 2,000m south of my farm. The largest military base in the country is located just a few kilometers north-east of my farm and their territory extends almost all the way down to my property. They have notified all their neighbors, me included, that they are conducting a large military training session as to prepare a new division of soldiers for the war against the Taliban and al-Qaida in Afghanistan. It’s quite ironic being situated practically on top of the largest military base in the country. It would have saved me a lot of hassle if I could just “borrow” a cup of sugar and 3kg of C4 from my dear neighbor 🙂
Thursday May 12 – Day 11:
As the acetylsalicylic acid purification and the rest of the picric acid production required a substantial amount of mineral and distilled ice cubes I spent the whole day converting water to ice cubes; a total of 50L converted whereas 20% of it was from mineral water. I ended up completely filling up a very large freezer with ice-cube-plastic-pocket-sheets.
Friday May 13 – Day 12:
As the acid manufacturing went too slow I bought more funnels at the local store, to up the production rate. I continued to synthesize acetylsalicylic acid from aspirin that day.
Saturday May 14 – Day 13:
I continued to synthesize acetylsalicylic acid from aspirin.
It’s the Eurovision finale today. I just love Eurovision…! 🙂 It’s a lot of crap music but I think it’s a great show all in all. I’ve seen all the semi finals and will take the time of to watch it later today, online. My country has a crap, politically correct contribution as always. An asylum seeker from Kenya, performing a bongo song, very representative of Europe and my country… In any case; I hope Germany wins!
Sunday May 15 – Day 14:
At the last batch of preparing pure acetylsalicylic acid my hot plate stirrer broke down. The magnetic mechanism stopped working. Fuck, Chinese piece of shit equipment, I should have rather paid more to get good European quality machinery…! What should I do now? Creating picric acid and DDNP without a magnetic hotplate stirrer would be very labor intensive and difficult and ordering a new product from a national supplier would take at least two weeks… I really don’t have much choice in the matter. I’m ordering a new plate today and I can focus on the non-chemistry tasks until I receive it.
I managed to completed to synthesize the last batch of acetylsalicylic acid from aspirin without my hot plate stirrer. I now had to dry it. After scraping out all the content from the filter papers I spread the content evenly on several plastic boards. At first I put the boards in normal room temperature, but as this proved to be a very slow method I ended up placing the boards in a small room with a oven at maximum temperature (around 30ªC). In retrospect I realize I would have saved several days by just drying the purified acetylsalicylic acid in a Pyrex dish in the oven at 50-70ªC, but even now I am not sure what effect heat above 30ªC would have on the acid. I am 70% certain it would be the optimal method though as this oven method works (confirmed) on drying both PA and DDNP.
Monday May 16 – Day 15:
Mixing up and further drying all the acetylsalicylic acid on the plastic boards.
Tuesday May 17 – Day 16:
Since I cannot continue on the chemistry phase, due to the lack of a hot plate stirrer, I started boiling my sulfuric acid outside. I initially bought 3 specialty induction plates (flat porcelain) but they didn’t function as my 2L beakers didn’t cover the minimum diameter required for the induction plates to function. I began with one hot plate and created boiling stones by crushing a few small lab beakers. The boiling stones only made the boiling more difficult and complicated so ended up without the use of boiling stones.
Wednesday May 18 – Day 17:
Continued boiling, now with three regular plates for maximum efficiency. Boiled after dark as the smoke generated as the acid surpassed 70% was so thick and compact that it would surely alert neighbors even several miles away.
Thursday May 19 – Day 18:
Wanted to set on a plate, boiling sulfuric acid, while I did some shopping in the northern town. I noticed someone lurking outside the door and saw the neighbor. There was a BMW in the upper barn area he was going to fix up for the owner. As I was about to go outside in full protective suit, he almost saw me before I saw him. I helped him push out the car and gave him the gasoline required to drive it to his place. I’m going to stick to nighttime boiling from now on to reduce my exposure to any unwanted surprises. I was very lucky today, something I cannot take for granted in the future.
It’s essential to create as much goodwill you can from the neighbors. Use any opportunity to generate goodwill from them. This goodwill will be returned indirectly by them not probing and investigating. If you get a visit from neighbors, be polite and friendly, offer them sandwiches and coffee, unless it will jeopardize the operation. The goodwill generated is likely to be to your benefit later on.
Friday May 20 – Day 19:
Finished boiling sulfuric acid
Saturday May 21 – Day 20:
Went to the capital to pick up a few parcels; 5 large packages of micro balloons and 50 more liters of distilled water. I also purchased a 50kg weight dumbbell set for fertilizer grinding, costing 700 euro, as it would most likely be the best way to crush the fertilizer prills using this method.
On my way home to the farm I noticed what I believed to be a civilian police vehicle south of the southern town (30km from the farm). At this point in time I remembered I had forgotten to turn on the lights on the car since I tested out my blue LED lights the day before. Hmm, they should have stopped me for this violation. Very weird. As I came closer to the farm I noticed what I believed to be another civilian police car. Damn, I got a really bad feeling about this and my instincts told me I was about to be apprehended. Too many red flags were lit. I stopped 500 meters before the farm entrance and had a smoke, preparing mentally for a potential welcoming party at the farm. What should I do if I was about to be SWAT raped by a 6 or 12 man team? I didn’t have any weapons available as they were all inside the main house. Should I make a run for it, if so, where would I go? Would I have time to fetch my evacuation kit, and should I try to get it and shoot my way out?
After the break I approached the farm, and turned on the fog lights on the car so that I could have an advantage should they approach me from the front. I stopped 50 meters north of the main house and I was shocked at the sight that awaited me…! The barn door was wide open!!! Someone was here! They were probably circling me right now or waiting for me inside the main house! I waited 20 minutes with the fog light aimed straight at the direction I expected them to come from. Perhaps they are not here, maybe they just installed monitoring equipment like they often do? I entered the house, 
picked up the glock and searched the house and the barn. Nothing. I began searching for monitoring equipment, nothing…
Paranoia can be a good thing, or it can be a curse. The barn door had probably been opened by the wind. I decided then and there that I would not allow paranoia to get the best of me again. If they were to come for me one day, there was really nothing I could do about it, so it would not be constructive to worry about it.
Sunday May 22 – Day 21:
Started relocation of fertilizer. Broke down a 600kg bag into 13-14 x 50kg bags, loaded in the truck, drove 100 meters and carried them with a “carry trolley” into the barn. Did a full 600kg bag. Was exhausted.
Monday May 23 – Day 22:
Initiated the fertilizer grinding phase. I was unsure whether I had to pulverize the fertilizer or not. Most guides said it was a positive thing as some fertilizer prills are coated with an anti-absorbing layer. I crushing a small batch, placed it in a plastic bag and soaking it in diesel, I also prepared another small bag of prills and soaked that in fuel to see whether it would absorb any liquid. Updated log
Tuesday May 24 – Day 23:
The prills had not absorbed any diesel at all, during the last 24 hours, so I concluded that the only approach is to pulverize the 5 x 600 bags of 27-0-0 AN fertilizer. I cleaned the concrete floor in the barn thoroughly and poured 50kg of fertilizer prills on it, spreading it evenly so that I could roll the 50kg dumbbell back and forth to crush it, and then use a broom and spade to gather up the pulverized AN before it had absorbed a lot of moisture from the air. I was sure that this method would work as I managed to semi-crush the prills with my 20kg dumbbell. If a 20kg dumbbell almost could do it, then surely, a 50kg dumbbell would ensure excellent grinding. I estimated that I could grind 50kg within 20 minutes, 3 times faster than any other method I had heard of.
To my great disappointment, crushing the prills with the dumbbell failed miserably. The prills were only partially crushed and rolling the dumbbell proved to be an especially labor intensive experience. Also, the crushed prills absorbed moisture much faster than anticipated so the time required for me to crush 50kg (2 hours) would result in more or less AN powder fully saturated with water moisture… Fuck, why can’t anything go as planned???? And the dumbbell set cost me a total of 750 euro and now it has proven to be worthless… What do I do now?
Wednesday May 25 – Day 24:
As this was a big setback, I decided to seek comfort and attempting to erect my morale, which was currently in the toilet, at the restaurant in the northern town, ordering a three course meal while readjusting the plan. I had previously heard of a Marxist terrorist traitor in the early 70s. I believe he was called Baader or could it have been Meinhof, terror prostitutes for the Soviets and loyal dhimmi whores of the Islamic Ummah. Anyway; I remember reading about him using electrical mixers to crush AN prills in his apartment. Apparently, he had purchases several crates of these mixers and used several simultaneously for efficiency. I’m going to test this out shortly. If electrical mixers/blenders from the 70s could do it then surely; new modern blenders can!
Thursday May 26 – Day 25:
Shopping for blenders. Bought around 12 – stationary and handheld, different brands for testing.
Friday May 27 – Day 26:
Started crushing fert prills, testing out the various blenders. More than half of them where completely useless as the shape of the container prevented proper circulation of the prills after crushing them. A suitable blender will ensure flawless circulation and result in a fully crushed batch within a reasonable time frame. Found a perfect blender; Electrolux. which was able to fully crush 95% of the prills, in portions of 0.5-0.7kg within 20-35 seconds.
Saturday May 28 – Day 27:
They had the Electrolux stationary blender in limited supply so I had to drive all day to purchase 6 from three different cities.
Sunday May 29 – Day 28:
Continued relocation of the fertilizer. Did another 600kg bag.
Monday May 30 – Day 29:
Completed the third 600kg bag. I could hardly move my fingers and I was certain that I had damaged them permanently. I decided to limit the process to three bags as the work required to process 5 bags (3000kg) would simply be too exhausting for one person…
Tuesday May 31 – Day 30:
I had to rest the whole day as I was completely exhausted…
Wednesday June 1 – Day 31:
Updating log
Thursday June 2 – Day 32:
I saw a car driving through the property while I was surfing the net. As I went to greet him I noticed he was taking pictures of the farm. He, around 50-60, said he was a tourist wanting to take landscape pictures. His actions and body language indicated however that he was lying. My instinct told me that he was a police officer. I offered him coffee and suggested he should go down to the river bank as it was the optimal place for taking photos. I noticed that he continued to take pictures of the farm. When he approached the house I chatted with him again. From what I understood, reading his body language and between the lines, he worked for the police and he was following up on the “marijuana farm” case. He disclosed that his daughter was a drug-sniffer-dog trainer. He was probably taking pictures in relation to this case. I told him that some people had set up a marijuana farm here a few years back. He seemed surprise, although he probably knew that already. This encounter was a concern for me for a few days, but I decided to just forget it as it wasn’t anything to do about it if he was to return. I’m just glad I gave him a good impression.
I decided to begin crushing the fertilizer using four Electrolux blenders simultaneously. However, it made a lot of noise so I decided to do this work from 23:00 to 07:00. I managed to complete 5 x 50kg bags, mixing in diesel 4 times per bag to distribute it evenly, then closing both the inner and outer bags properly using 5 individual pieces of duct tape. It is essential to hurry to place the crushed AN into the bag as it will begin to draw moisture from the air immediately after it is crushed, even while being inside the blender container.
Friday June 3 – Day 33:
Continued crushing prills and mixing with diesel. I got into a good routine and managed to complete 10 bags. Very exhausting. I spent around 1 hour for each of the first few bags the day before, but managed to increase efficiency so that I completed 1 bag every 40 minutes (optimal achievement was 1 bag per 32 minutes). 20 bags to go… 2 of the blenders broke after processing 12 bags, even though I used it on the lowest power alternative. Replaced them with new ones.
Saturday June 4 – Day 34:
Completed 6 bags.
Sunday June 5 – Day 35:
Completed 4 bags. 2 more blenders broke down. I have to buy a couple of new ones tomorrow.
Monday June 6 – Day 36:
Bought two more blenders. Completed crushing 1,600kg of fertilizer prills and mixing with diesel. I’m going to save the last 200kg and possibly use it as an “inner charge” mixed with purified RC fuel (nitro methane). I will most likely only have enough nitro for 1 x inner charge though. After completion of the grinding, it was prills and AN dust all over the place :)) My green AN-crushing clothing were now grey… Surely, I’m going to die from cancer within 12 months as I must have gotten a lot of this crap into my lungs even though I used a 3M mask… It took a while to clean it all up to prepare for the next phase.
Watching “The Shield”, a couple of episodes each day on average. I downloaded all 7 seasons in the start of May.
Tuesday June 7 – Day 37:
Went to the capitol and picked up the new hot plate stirrer that had arrived.
Wednesday June 8 – Day 38:
Started synthesizing picric acid, completed 1 out of 10 batches.
Thursday June 9 – Day 39:
I heard someone parking their car outside the house today. It was one of the neighbors wanting to buy the current crop as animal food. As I hadn’t had the time to plant a crop of my own, the current one was primarily timotei [Timothy Grass] and clover – used for food to cows and sheep. We discussed the issue for a while and I explained my situation to him. We agreed that he could harvest the current crop. He would return within 14 days to initiate the harvesting. I offered him a good price. As we strolled down to the field I was somewhat concerned that he would notice the fume hood fan pipe sticking out of the living room window…
Continued synthesizing 2 and 3 of 10 batches of picric acid and placing the finished compound to dry. It took a long time to complete the nitration of the acid due to the fact that I only had 1 hot plate stirrer. If I had 3 I would be able to complete all the PA within 2-3 days. Damn, something went wrong with these two batches. The solution was red and it failed to nitrate properly. I concluded that I must have used a bottle containing 37% sulfuric acid, instead of the required 90% +…
Friday June 10 – Day 40:
Continued synthesizing 4 and 5 of 10 batches picric acid and placing the finished compound to dry. I placed 50g of my best batch in the oven to prepare for testing and to use it for DDNP manufacturing. Potent PA should burn when lit with flame.
To my great disappointment, nothing happened when I did the fire test…! What the hell, how is that possible, it was completely dry and that particular batch was manufactured perfectly according to specifications!? I did everything according to specifications… Could the compound I have manufactured be inert???? Unfortunate circumstances rams cock in arse once again…! I started to have serious doubts and my morale and motivation started to shatter…
I concluded that given the recent events, I would now have to move forward with operation B, at least continue to complete all preparations for this as the primary operation seemed to wither away.
Saturday June 11 – Day 41:
As I was doing research on the net, a thunder storm approached, but it was still very far away. I have never had any problems with electrical overcharges the last 15 years because I always use specialty electrical outputs with gas cylinder electrical overcharge protection. Suddenly my PC made a relatively large bang, and the electricity went out. Once electricity was back on I noticed that my PC was dead. FFS, not again… As it was in the evening, I couldn’t fix it until Monday…
I prayed for the first time in a very long time today. I explained to God that unless he wanted the Marxist-Islamic alliance and the certain Islamic takeover of Europe to completely annihilate European Christendom within the next hundred years he must ensure that the warriors fighting for the preservation of European Christendom prevail. He must ensure that I succeed with my mission and as such; contribute to inspire thousands of other revolutionary conservatives/nationalists; anti- Communists and anti-Islamists throughout the European world.
Sunday June 12 – Day 42:
Although highly demoralized, I decided to do one last test of the PA compound. I decided to create a batch of DDNP using my best batch of picric acid. This was to be my last attempt to move ahead with operation A. I didn’t have much faith in creating such a difficult compound as DDNP when I couldn’t even manage to create a decent batch of PA… I spent most of the day preparing that batch of DDNP, then drying it in the oven for 4 hours.
Monday June 13 – Day 43:
I prepared a test device today and drove off to a very isolated site. The test bomb was composed of a 3g DDNP primary and a 30g PA secondary. If this test would fail, I would abandon operation A and move forward with the non-spectacular operation B.
I lit the fuse, went out of range and waited. It was probably the longest 10 seconds I have ever endured…
BOOM! The detonation was successful!!! 🙂 I quickly drove away to avoid any potential unwanted attention, from people in the vicinity. I would have to come back a few hours later to investigate the blast hole, to see if both compounds had detonated.
A few hours later, after returning from a restaurant in the southern town to celebrate this success, I went back to the blast site to evaluate the detonation. The DDNP primary detonated successfully but the dry picric acid booster did not detonate at all. So I confirmed that the PA was not inert, just of a very low purity grade. This could be sorted as I would now move forward with purification after completion of the last PA batches. Today was a very good day as I really needed this success.
Tuesday June 14 – Day 44:
Continued synthesizing picric acid and placing the finished compound to dry.
Wednesday June 15 – Day 45:
Continued synthesizing picric acid and placing the finished compound to dry.
Thursday June 16 – Day 46:
Began purification of the PA compound.
Friday June 17 – Day 47:
At this point in time, considering that this project has taken much longer than anticipated, I was in a serious liquidity squeeze. The fertilizer invoice on 4,500 euro should have been paid on May 19th. I had called to the company and asked for an increase grace period and they said it was ok as long as I paid before June 8th. This was almost 10 days ago and I received a follow up notice today stating that they would forward the invoice to the credit collection company on June 22nd. In addition to this; the farm rent for July, 1,250 euro, was due on June 25th and the invoice for the fume hood, the hot plate stirrer and my secondary fan, which I wasn’t even going to use, 2,800 euro, was due on June 26th. This would mean that I would officially default on the payment and receive a credit warning, which would basically blacklist me and thus preventing me from renting a car, as the car rental companies always perform a credit check. Needless to say; this problem could sabotage the whole operation and I needed to sort this out asap or the operation would be over before it had even started… I needed to acquire 8,550 euro within a week! As I had 1,500 in cash and in my primary account, I decided my only choice was to aggressively withdraw funds from all my 10 credit cards but even that wouldn’t be enough because of the weekly capacity limit. I called the farming supplier and made an agreement where I would pay half the amount now and the rest in July. They agreed. After aggressive cash withdrawal I managed to acquire the necessary funds, which allowed me to keep my head above the water until mid July.
At first, I thought I would manage to create enough picric acid booster material (1.5kg in total) to disregard the addition of AL powder. But considering the fact that I would only manage to produce aprox 200-300g of booster I had no choice than to continue to prepare my 150kg of aluminium powder for addition in the ANFO.
The 150kg of AL came in 4 hermetically sealed drums each containing around 37kg of AL. After reading the “security precautions”, however, I was completely freaked out. The drum openings where wielded with a soft metallic substance so it would be difficult to open them without taking extreme risk. The warnings stated; contact with oxygen will risk detonation of the AL powder, contact with metal, concrete and even plastic will significantly increase the chance of static electricity which can cause a detonation. Friction and shock can also cause detonation. Close proximity of oxidizers (gas, diesel) or close proximity to electrical outputs etc. can cause detonation.
I first planned on creating an outdoor mechanism that allowed me to thrust a steel spear like object, by using gravity, creating a 3 cm hole in the top of the drum. However, I ended up taking a regular knife and starting to file down the wielded enclosement, even if it involved high risk. At this point in time I was very concerned for a potential detonation. If the barrel of AL powder was to detonate and I somehow survived, I would probably lose both arms instantly severely. The blast wave/flame would probably cauterize my wounds resulting in an extended and extremely painful death. The most pragmatical approach to solving this potential problem was to place my loaded glock 34 close to the work area. And if I survived a detonation, losing both my arms, I could still fire a round to my head, in order to prevent un-necessary suffering using my toe to trigger.
Eventually, I manage to file open the enclosement. I then considered putting the drum upside down in one of my empty fertilizer bags to prevent the presence of high levels of oxygen.
This method proved to be too exhausting since I had to hold up the 37kg drum with my hands. I ended up with putting a large 3 x 4m plastic sheet on the concrete floor and carefully pouring the AL powder out of the opening. Small clouds of dust began to generate but nothing happened. I carefully continued until the drum was empty rolling the side of the drum in a circular pattern from the center of the AL powder already poured out, until the drum was empty. There were small clouds of AL powder generated but the biggest one was aprox 20 cm in diameter, which settled down after a while. I continued after the small clouds had settled. It’s also worth noting that I had closed all the windows of the cellar basement so the humidity was relatively high, while oxygen level was below average.
In any case, this method worked well and I had gathered all the AL powder on the sheet, and thus preparing it for the addition to the ANFO.
Since I had solved the AL problem, I continued the purification of the PA.
Saturday June 18 – Day 48:
I woke up at 11:00 and checked my phone. There was an SMS sent 09:30 from Tonje, the owners girlfriend. She said she was ON HER WAY UP to pick up some equipment from the barn!!! Omfg; considering the fact that it’s a 2-2.5 hour’s drive from the capitol she would be here in about half an hour!!! I’m so fucked! She has a large storage room in the back of the barn and she would need to pass all my ANFO bags to get there. I would need 12 hours minimum to relocate the 1.2 tons of ANFO, not to mention de-construct my chemistry rig, fume hood, fan and clean up all the beakers etc spread all around. And the living room is full of yellow stains. It seems I will be left no choice than to use my glock and initiate the evacuation plan!
I called her up. Luckily she hadn’t left yet. Thank God! I fed her a story which resulted in us agreeing that she would come on Monday around 20:00. That was a real close one… I spent the rest of the day on purifying another batch of picric acid and relocating 1.2 tons of ANFO bags, storing them in the storage area between the corn silo and another room. I refer to this area as the spider cave or the spider room as there is no lighting there and it is spider webs all over the place. It is a lot of old junk in this room covered with spider webs.
Sunday June 19 – Day 49:
I spent much of the day relocating equipment and storing them in the second floor of the house. I covered all the stains on the floor with a rug and covered the living room table with a blanket.
Monday June 20 – Day 50:
I spent the day purifying a batch of PA and cleaning all the beakers for storage. I went all over the property to ensure that it would be presentable for today’s visit. There was a 37kg pile of aluminium powder on plastic sheet I was unable to move so I covered it up as best as I could. There was also a lot of stains on the work bench in the barn I was unable to do anything about. Then there was the 1.8 tons of ANFO bags and equipment stashed in the spider cave. I covered it up properly but she would easily notice the diesel smell from the bags and uncover it if she went in there… The fate of the whole operation relies on her not noticing. She came to the farm around 20:30. We talked for a while and she said she wanted to stay the night, sleeping in one of the outhouses. It was late in the evening so she wanted to spend the next day getting things from her storage room. I said it was fine and I fed her a story about me having to salvage much of the fertilizer for long term storage, seeing that I would not be able to sow the planned crop (sugar beets) due to too much rocks in the soil. I needed her to be prepared in case she went into the spider room. I just hope she would let me know if she got suspicious the next day so I could take necessary action…
Tuesday June 21 – Day 51:
I woke up earlier that day to ensure that she didn’t start sniffing around in the house without me being there. At this point in time I figured it was a 50% chance she would get suspicious enough to contact the authorities. I made her some sandwiches and coffee later that day and we chatted for a couple of hours in the living room of the main house. It would seem as she hadn’t noticed anything, at least this is how I interpreted her tone, body language and judging from the topics we discussed. She went off later that day, and I figured that I would very shortly get a visit from the authorities if she forwarded her potential suspicions. In any case; there was nothing I could do if it came down to that…
Wednesday June 22 – Day 52:
I reinstalled Windows 7 on my PC hoping that it would solve my network problems. It didn’t work and I figured it had to be the network card or the phone line itself. I drove to the PC-repair guy in the local town and delivered it. It should be ready by tomorrow. I continued to prepare the chemistry equipment for getting ready to manufacture all DDNP batches. When I was done I completed the last purification batch of the unpurified picric acid and ended up with several liters of PA liquid that had to be chilled. I then drove to the local town and bought three portions of Chinese takeaway. Beef with noodles and fried rice, yummy!. I took an early night as I didn’t have any PC.
Thursday June 23 – Day 53:
I went to the PC-repair guy in the local town today and he brought very good news. Apparently, it was only the network card that had short circuited so he had replaced it with a new one and I should now finally be able to get online. Once back at the farm I got online and paid the outstanding on the remaining of my 9 credit cards so I wouldn’t default on any of the outstanding amounts. When I was about to log into the site of the 10th and last credit card provider my PC went poof and the power went down in the house! Seconds later I heard a large thunder. What the hell, not again!!! And it isn’t even raining ffs. I was able to get the PC running again without problems but my DSL-modem short circuited from the lightning strike as an electrical surge went through the phone line again. How is it possible to be this unlucky?! Only two hours after I’ve had my PC fixed nature comes and rapes me again… Thank god it was only my DSL-modem was destroyed as I have two extra DSL-modems left… ;P Nevertheless, my morale took a small dent and I decided to get it back up by watching two episodes of Rome and enjoying nice Chinese takeaway. Later that day set up the fume hood and fan, carrying it down from the second floor, carried down the PA liquid in all the beakers down to the cold cellar, awaiting further chilling in the refrigerator. I then prepared for the first large batch of DDNP, halfway completing it before putting the semi finished product in the fridge.
Friday June 24 – Day 54:
I continued on the second stage of the first large DDNP batch today, relocated some of the containers with PA liquid from the cellar to the fridge and updated the log. I couldn’t start another badge due to the fact that I only have two 2 liter beakers, very annoying. The worst part about synthesizing formulas with a lacking amount of equipment is the downtime due to waiting for natural heating or chilling of compounds. The whole house is stinking of chems now. DDNP liquid smells like fresh egg fart… <3 And I had to close all the windows to contribute for the liquid to reach room temp faster. All these chemical fumes can't possible be very healthy... I would have probably died from cancer within the next 12 months ;P
Saturday June 25 – Day 55:
Finished first large batch of the DDNP today. The result, after drying should be approximately 5-12g after purification. As the first half of the PA liquid had been chilled in the fridge for 18 hours I went ahead and funnel filtered out the crystals. As this was supposed to be the best batch of PA I was extremely disappointed to see that there had been minimal precipitation of crystals in the liquid. It should have been 15g of crystals for each liter but it turned out to be 2g per liter. The only rational explanation is that the purification method I am using is significantly flawed. However, considering the fact that I tried putting ice in the beakers and even putting them in the freezer with poor results, I really do not know what has gone wrong. The only alternative reason would be that I used a flawed manufacturing method of PA or that I should have purified the acetylsalicylic acid prior to initiating the PA manufacturing. As I can’t really do anything at this point regardless, I would like to think it’s the purification method and not the manufacturing method.
After I had scraped out the yellow PA crystals and the brown DDNP crystals putting them in plastic boxes and placing them in the cold cellar I went to do some shopping in the northern town. There is a festival and there was a lot of things happening, a fair, various food stands, concerts etc. Since this town has a limited variety of fast food I decided to drive down to the southern town, eat and pick up some Chinese takeaway. There was a relatively hot girl on the restaurant today checking me out. Refined individuals like myself is a rare commodity here so I notice I do get a lot of attention in both the southern and the northern town. It’s the way I dress and look. There are mostly unrefined/un-cultivated people living here. 
I wear mostly the best pieces from my former life, which consists of very expensive brand clothing, LaCoste sweaters, piques etc. People can see from a mile away that I’m not from around here.
Later that day I initiated a new batch of DDNP. As I completed the first phase I noticed one of my two 2L beakers had a large crack in the bottom and drops of liquid was coming out. I was very lucky the beaker hadn’t completely cracked open as it would have destroyed my hot plate stirrer for sure. I remember there was a tiny crack that appeared during sulfuric acid purification when I was boiling as a madman outside. Now the beaker is ruined. To be honest; I’m surprised this hasn’t happened earlier as I’ve abused these two beakers excessively. I made a mistake by buying only two 2L beakers instead of 4-5. That mistake has cost me at least 3-4 days in total. The loss of this beaker poses a significant problem as I relied on these two beakers to take me through the whole manufacturing process. If I go down a size and use the last 1L beaker I have left (I managed to break one during washing after boiling all the sulfuric acid outside. it will take me an extra day to complete the DDNP manufacturing. I’ll see what I’ll do later today.
While waiting for the liquid to reach 4ªC in the fridge I went to train for the second time since I came to the farm. I used two backpacks, one in front and one on the back, with a total weight of 27kg. In addition I filled a container with 5L of liquid and held it with my left and then right arm partly stretched out in front of me. I took a 20 minute walk with these weights and it was a great exercise. As always I take protein powder + creatine before and after the exercise to maximize the outcome. 
I’m almost out of my steroid/winstrol tabs now as this project has taken significantly longer than expected. I only have a few days left worth of tabs so I have to sort this out in the coming days. I was thinking of traveling back to the capitol and restock after I complete the DDNP production. Damn, the most annoying thing about synthesizing DDNP is that you have to wait 12 hours for the liquid to reach 4ªC in the fridge, later on you have to wait 3-5 hours for the compound to chill from boiling to room temperature and at the last phase you need to wait 12-18 hours for the liquid to go from 4ªC to room temperature. In other words, one batch of DDNP takes approximately 40 hours. If I had 6 x 2L beakers instead of 2, it would allow me to complete 3 batches in less than 2 days (45 hours), instead of having to spend more than 5 days (120 hours) due to lack equipment…
Sunday June 26 – Day 56:
Completed the second and third phase of the second batch of DDNP. I moved the last batch of PA liquid from the cellar to the fridge. Updating log.
I am noticing increased pressure from my friends and family to come visit me at the farm. I am countering by saying I will be done with this seasons work within x weeks, and that they are more than welcome to visit me then. This has worked for 2 months now, but this pressure will increase progressively as I delay.
Monday June 27 – Day 57:
Filtered out the pure PA crystals from the last batch of PA water after chilling it in the fridge for 12+ hours. Cleaned out all the beakers. Completed the last stage of the second batch of DDNP. Initiated the first stage of the last batch of DDNP. As I have now re-initiated my training I did a workout later that evening.
Tuesday June 28 – Day 58:
Continued on the last DDNP batch. Went to the northern town to do some errands. Updating log. Later when searching online for efficient DDNP purification methods; I just learned that when acidifying the sodium picramate solution during DDNP manufacture, H2S and SO2 is released, which is potentially deadly. Crap, and I’ve been inhaling that diarrhea gas for three days now! I didn’t even bother turning on the fan in the fume hood on a couple of occasions during that stage…
Wednesday June 29 – Day 59:
Completed last batch of DDNP. I was now facing the task of purifying it, but was uncertain how to approach this. Was it necessary to purify it at all? How much would the VOD (velocity of detonation) suffer from not purifying it? Would it cut the VOD in half? My whole operation depended on the VOD from my primary being able to detonate the secondary explosive. After a few hours of research online I found that mixing the unpurified DDNP in acetone, then filtering it to another beaker with a lab filter or alternatively two coffee filters and then boiling the acetone away over a hot water bath, would be the optimal approach as the precipitation method with ice cold water method apparently didn’t work for those that tried it. The problem now was that I only had one conical flask and one porcelain boiling dish (100ml) suitable for this type of purification method. I feared that this method would take a very long time with the lack of equipment. As I didn’t have much choice I began the purification process. I managed to purify 1/3 of a batch (I had three batches) in 3 hours. As I got the hang of it I managed to reduce the time spent to 2 hours. Watching Spartacus – Blood & Sand, a brilliant series :-). It’s my favorite one, in addition to Rome, Battlestar Galactica, Caprica and Stargate Universe! <3. 
The Shield, Dexter, Sleeper Cell, Vampire Diaries and True Blood are good as well. All the series adhere to the multiculti ideology but such is life for the time being.
Thursday June 30 – Day 60:
This house is infested with beetles. Just now I was about to reach for a chocolate in my goodie bag and a beetle had crawled in, ffs. And an hour ago, when I was putting on my nitril gloves to do another DDNP purification cycle, something was crawling in one of the fingers 🙁 Needless to say, I freaked out… After that I started killing every little insect in view. And I’m up to 18 just in the last hour… Parts of this house is from 1750 so it’s probably several bug colonies in the walls.
I haven’t slept at all since yesterday, trying to complete the last DDNP purification. That will complete the chemistry phase and I can move on to the last ANFO –>ANALFO phase. Addition of aluminium and micro balloons to the 1.8 tons of ANFO. But before I start the last phase, I need to travel to the capitol for resupply.
When I went inside the barn yesterday, a window had loosened and laid smashed on the floor. There are several signs of noticeable wear outside as well. Three large trees has blown down and two panels on the side of the barn has blown off. Anyone seeing this must think I don’t give a damn… I haven’t had the time or energy to sort that out yet. Perhaps when I’m done with the chemistry phase…
As I’ve now completed the purification process of 25g of DDNP (I will save an additional batch of unpurified 12g as backup), it’s time for me to wrap up the chemistry phase. I do have 50L of impure nitro methane (30% RC fuel) in the barn but it’s a bit tricky to purify it. I will see what I can do about it tonight. If I can’t find an appropriate purification method I’ll just skip the NM altogether. In any case; I can now dismantle the lab, again…
I talked to my friend, Peter, after missing one of his inc. calls earlier. He is visiting his girlfriend in a nearby town and wanted to stop by the farm… I fed him a story about me going to the capitol and it worked, for now… However, it would not be suitable to receive visitors here as anyone stopping by would eventually understand that things are not what they seemed. I have to be careful not to answer his calls while he is so close to the farm. Manipulation and deceit can quickly turn around and act in your disfavor, if you are not careful. I guess I have been somewhat reckless in regards to maintaining my social network. Choosing complete isolation and asocial behavior, in phases like these, would probably be a more pragmatical approach for ensuring secrecy. However, complete isolation and asocial behavior can also defeat the whole purpose if you end up losing the love for the people you have sworn to protect. Because, why would you bless your people with the ultimate gift of love if every single person hates you?
Friday July 1 – Day 61:
Ok, I have now completely dismantled the lab and stored all the equipment in boxes on the second floor. Removed all the glass from the broken window near the work bench in the barn and fastened a plastic sheet with duct tape.
It is now 8 days since I was forced to drastically reduce my winstrol intake and 2 days since I ran out of both winstrol and DBOL tabs. I’m noticing slight symptoms of withdrawal resulting in loss of muscle mass (down 3kg from my peak at 96kg). I’m also low on no-Xplode and protein powder. I need to restock in the capitol. Damn, Peter is visiting his girlfriends sister in central Norway and Marius is unavailable due to work.
Saturday July 2 – Day 62:
Going over the travel route for both plan A and B for the upcoming event, familiarizing myself with the driving routes and plotting in destinations in my Garmin GPS. I went to the gym and did a really hard workout. I was surprised I managed to lift as more or less as much as I could when I was at my best, in late April. However, I had to cancel the program half way because I was getting dizzy. Damn, just too long since I properly worked out.
Nice, I have enough winstrol for 20 more days (10mg x 100 tabs). I should have ended this cycle after 6-7 weeks though and I am now on my 9th week… Not healthy at all and I’m concerned about my liver values.
I took my mom out to dinner this evening, then hooked up with Axel for a coffee afterwards, discussing politics. Oh, how I missed these discussions… 🙂 Went back to the farm late in the evening.
Sunday July 3 – Day 63:
Raining again… I planned to extract the armor cache today (the Pelican 1620 case I buried July 2010) or initiate evaporation purification of my 50ish liters of nitro methane, RC fuel. But I will have to wait for the first sunny day. Will have to begin the final phase shortly, the mixing of AL and micro balloons in the ANFO. I think I’ll take a day off prior to the upcoming phase shift and just download some new trance tunes. Lange feat. Sarah Howells (amazing voice) has three songs I haven’t yet downloaded;
Lange Ft. Sarah Howells – Fireworks (Club Mix),
Lange Ft. Sarah Howells – Out of the Sky (Original Mix) and
Lange feat. Sarah Howells “Let It All Out” (Lange)
Noticing that the testo withdrawal is contributing to increased aggressiveness. As I’m now continuing with 50mg it will most likely pass. I wish it would be possible to somehow manipulate this effect to my advantage later on when it is needed. Because the state seems to very efficiently suppress fear. I wonder if it is possible to acquire specialized “aggressiveness” pills on the market. It would probably be extremely useful in select military operations, especially when combined with steroids and ECA stack…! It would turn you into a superhuman one-man-army for 2 hours! <3
Monday July 4 – Day 64:
Updated log for a few hours. I then began the preparations for a trip to extract the armor cache, I had dug down a year ago in July 2010. I am really concerned that someone has somehow found the cache. It would be a significant setback if that was to be the case. Or what if moisture had somehow penetrated the pelican case I used. It would be possible considering the fact that the area where the cache is located has permafrost during winter.
I did not look forward to this extraction trip as I had nightmarish memories from digging down the case in the first place, 12 months ago. The location is in a mosquito infested area and combined with the labor intensive nature of this sub mission, I remember it as a painfully exhausting and dreadful experience.
After packing the necessary supplies for the trip, I went by a hunting store and purchased upgraded ammunition (200 SP rounds, costing 300 euro) for my .223 Ruger Mini 14.
After a few hours driving I reached the destination. It took me around 30 minutes to locate the grave as I had camouflaged the dig sight very thoroughly, covering it with tree stumps etc. As expected, there was a big welcoming party waiting for me… Oh my, apparently, due to their great feast a year ago the mosquito population had seemed to triple for that particular spot… To counter this, I wore a raincoat which served to protect me from insect bites. However, laboring intensively in an air tight raincoat is extremely painful, even dangerous. I generated at least 2L of sweat by the time I was done so I had to constantly hydrate from my camel back. After two and a half painful hours I had extracted the armor crate and its content. Considering the fact that I do not have a secondary pistol, I disregarded filling up the crate with survival gear which was the original plan.
As for the content of the crate, it was in perfect condition. Not a single drop of liquid had penetrated the crate and no moisture had entered the rubber seal whatsoever. This means that one can bury electronic devices as well without it being affected at all!!! 🙂 These Pelican cases are simply amazing for this purpose. I’m sure you can bury it for several years, even below permafrost, perhaps up to 10 years, before the rubber seal rots away. I’m very impressed!
I arrived at the farm late in the evening. My neighbor had started harvesting my crops, as was the agreement made earlier.
Tuesday July 5 – Day 65:
Spent a few hours on ammunition administration. Replaced most of the .223 HP (hollow point) rounds with SP rounds. According to my research; HP rounds for .223 tend, 80-90% of the time, to not mushroom as intended, which defeats much of their purpose. SP (soft point) on the other hand, at least for the .223 caliber, are more suitable for the purpose of inflicting maximum damage to vermin. I did other practical tasks this day including coloring some of my equipment black with permanent markers of various sizes. Emptied the armor case. Lol, I forgot I had put a batch of DBOL, winstrol and ECA stack in the case :-). Nice, now I don’t have to make more ECA stack tabs from scratch.
I realize that if I am apprehended with all this equipment I will have serious problems trying to explain its intended usage…
Wednesday July 6 – Day 66:
Changed the tertiary charge setup, and planned the last manufacturing phase accordingly in regards to ANALFO mixing. I will be creating 19 x 50kg bags containing 43kg of ANFO, 6.45kg of AL (15%) and 1.2kg of micro balloons (2.7%). After that I will create 13 x 50kg bags containing 46kg of ANFO, 2.3kg of AL (5%) and 1.2kg of MB (2-3%). Re-located most of the ANFO from the spider cave to the processing bench.
Thursday July 7 – Day 67:
Re-distributed the micro balloons from the 16kg bags into 13 individual plastic bags each containing 1.2kg. Prepared 35 such bags – equivalent to 2.5% of the 50kg fertilizer bags. Started to do the same with the aluminium powder, re-distributing them from the 36kg metal drums to individual plastic bags each containing 6kg. Finished 6 such bags, but after further consideration I will use 5kg instead of 6. I realize now that many of the warnings concerning aluminum powder is nothing more than scare mongering, probably to limit the legal liability of the producer. It is much safer to handle than people might expect, even in the micro fine 400 mesh (63 microns) powder I have. I have generated multiple clouds of aluminium and nothing has gone wrong. Just be very careful and you’ll be fine.
As I was working on weighing the micro balloons on my gram weight, using my 3M full face mask, I noticed an itch on my nose. That’s when I saw a large black beetle on the inside of the mask…FFS. Freaked me out. I usually check for insects every time I wear gloves or the mask, but I must have missed it this time.
The neighbor is still harvesting my field outside. He originally told me it would only take 6 hours total but it’s the third day now… As long as he is lurking around on my property he is going to slow me down significantly as I have to take extra security precautions. Not to mention I have to delay the nitro methane evaporation outside until he’s done. I could probably have done it inside, but considering the fact that methane forms potentially explosive/flammable vapors I’m not readily keen on evaporating the RC fuel inside.
Friday July 8 – Day 68:
I opened the remaining two aluminium drums and re-distributed the content in plastic bags (regular shopping bags). I then completed to weigh the content of the bags on a gram weight resulting in 18 bags a 5kg (10-12%), 10 bags a 2.35kg (5-6%) and finally two bags a 6.5 kg for the inner drum charge.
Saturday July 9 – Day 69:
I started mixing the ANFO with the micro balloons and the aluminium powder. I completed 2 bags a 50kg. It was very labor intensive, much more than I imagined as I had to first open the ANFO bags, then distribute 12.5kg of the content into a plastic 50L masonry bucket. I then poured the content into a plastic 100L masonry bucket. As much of the ANFO was packed into hard lumps I had to crush them with a rubber hammer. I then started to crush the smaller lumps with my hands until the ANFO was powdered. I then poured 25% of the micro balloon bag inside the bucket and mixed it (it will create clouds of micro balloon dust as you mix it), following by doing the same with the aluminium powder. 
Clouds of aluminum powder will be generated and the whole area will be covered in AL dust including your clothing, your hair, and every item you might have in a 5m radius. This is problematic as you end up spread AL dust everywhere as you walk around. I ended up assigning “mixing clothing and shoes” which I took off every time I left the room. It’s the only thing you can do to prevent spreading it somewhat but you will still get stained by AL. I considered using a hazmat suit or my different kind of lightweight dust suit but the problem is that it gets too hot when combined with intensive labor like mixing.
As the ANALFO mix was complete I then poured the mix into an empty 50kg fertilizer bag. This took 30 minutes so processing a full 50kg bag of ANFO creating ANALFO took 2 hours. After I had prepared 2.5 bags of ANALFO I was exhausted and decided to take a break. Mixing ANALFO is very messy and it’s especially annoying that you get aluminium dust everywhere.
Later that day while I was enjoying a meal, the neighbor stopped by. As I had just completed the mixing session I still had AL stains in my face and powder in my hair. I tried the best I could to quickly wash it off but my hair still had a silver tone and it looked very weird. The neighbor asked if he could fertilize my fields and remove some rocks as this would increase the yield of animal fodder by 100% (the current crop). As this meant that he would get several people to work on my property for a week’s time I declined telling him that I had plans of my own.
Later that day, while I was watching an episode of True Blood, I saw a large van driving by the house and parking next to my car. There were at least 4 people inside. Nice, I thought; it’s probably a SWAT team coming to skull-fuck me. The farmer must have tipped them off… Thank God, it was only 4 Polacks looking for worked and I sent them on their way. It would have been tempting to hire them to mix my ANALFO… <3, hadn't it been for the fact that they would have understood what was up :-)
Later that evening I put a large plastic container box with 8L of 30% nitro methane/18% oil/52% methanol outside to test the evaporation method. Theoretically; the methanol should evaporate before the nitromethane starts to evaporate. As such; you just let the mix evaporate down from 8L to aproximately 4L. This should leave you with aprox 60% nitro and 36% oil which is, according to my sources, 100% more efficient as an oxidizer as diesel when mixed with ANFO or ANALFO. According to my source; 25-40% nitro is as efficient as diesel, so anything higher purity is better.
Sunday July 10 – Day 70:
I mixed one more bag of ANALFO manually. There must be a better way than this… One single bag in 2 hours!? I will try to use my electrical concrete mixer instead. I bought it second hand for 150 euro. I am just very worried about three things when using a concrete mixer; the friction caused by the electrical stirrer, ANALFO/ANFO/AL in direct contact with metal, a spark from the electrical system. As these three factors can cause a detonation, I will keep my glock 34 close by in case I somehow survive an explosion… I feel I don’t have a choice as mixing manually is just too fatiguing and time consuming. I need a method that allows me to mix at least 1 x 50kg bag every hour or faster. In any case; let me die another day…
The use of my electrical concrete mixer to blend the ANALFO went without much complication. As usual, I worry too much about safety… <3 I poured in 46kg of ANFO and activated the mixer. The large and small lumps would not be crushed so I had to crush them with my hands manually. I then went on to mixing in the 1.2 kg of micro balloons and the 5kg of aluminium powder (400 mesh/63 microns, leafed). It generated significant AL dust clouds and it didn't mix optimally. However, I was able to complete one bag of ANALFO in 90 minutes so I was able to improve my blending per bag by 30 minutes compared to the manual method. Also, using the concrete mixer is much less fatiguing. Perhaps with time, I will be able to reduce this to 60 minutes per bag. In any case; it is hard work for one person and I am really beginning to understand why Mr. McVeigh limited his manufacturing to 600kg. He probably encountered much of the issues I did and he probably had to learn everything the hard way just as I have done.
My RC fuel (30% nitro methane, 18% oil, 52% methanol) has been allowed to evaporate for 26 hours now (average 20-25C daytime, 10-15C nighttime) and the mix has now reduced its mass by 50%, from 7.8 liters to 3.9 liters. I poured the liquid into a 4L container. I noticed that the evaporation took considerable longer during the night. I'm a bit concerned regarding the exothermic nature of methanol. Methanol absorbs moisture from the air and the water it absorbs has the same evaporation temperature as nitro methane. I have been unable to research exactly how much the absorption ratio is compared to the evaporation ratio as little information is found online regarding this purification method. If my assumptions are grossly incorrect, and the research I found was false, I will end up with an inert goo which will ruin the detonation completely. If I'm right, however, the oxidizer I will end up with will be more than twice as powerful than diesel and will reduce the need for a booster to detonate the ANFO/ANALFO. The inner charge I will end up with will be 50kg of ANALNM (Ammonium Nitrate ALuminium Nitro Methane). Regarding the purification of RC fuel; I did however find dozens of distillation methods from advanced to less advanced but the problem is that you need a decent distillation rig and even if you have the equipment, it is quite complicated and very dangerous to isolate the nitro methane that way. According to my overall research regarding nitro methane purification the most pragmatical approach, given my limited resources, is to just do an evaporation purification. I have a total of 72 liters of RC fuel with an average nitro methane percentage of 28%.
In any case; I feel I've been really slacking the last week and I really need to step up the pace now. At least now, everything is set so I don't have to research any more techniques and methods.
Monday July 11 – Day 71:
Mixing 3 bags (alr done 4)
I reserved a rental car today, from AVIS, the same company I’m already renting my primary car from. There was not enough credit on the card for a deposit so I had to go to the northern town and transfer 2000 euro to it.
Considering the fact that I am currently working on the most dreadful task, I bought a lot of exquisite food and candy today. I really need to recharge my batteries and increase my morale before initiating the ANALFO mixing. Good food and candy is a central aspect of my reward system which keeps me going. It has proven efficient so far. Occasionally, if I’m really not keen on doing a specific sub task, I take a red bull, a shake of noXplode or an ECA stack – to get a jump start before jumping into something I’m not looking forward to – f example extremely lame or labor intensive tasks or tasks involving great risk of injury or death.
I continued to purify, through evaporation, the RC fuel today, pouring 32L into four different plastic containers. I had marked the containers with a permanent marker for 2L, 4L and 8L which allows me to see how many percent it has evaporated. I put one in the outhouse, to test whether inside evap would be better, and three outside. I placed them all in the outhouse before I went to bed to prevent the batches from being ruined in case of rain during the night. I noticed the batch I left in the outhouse (at around 15C) had only evaporated by 1L, in comparison to the others (20-25C) which had evaporated by 3L, which indicates that outside evap is preferable.
The mixing of AL powder and micro balloons with the ANFO is a truly dreadful task. Not only is it extremely messy; it is very labor intensive as well, not to mention that you have to work using the 3M gas mask. I hate this task. It’s the most dreadful job I’ve encountered during the whole operation… However, I’ve finally managed to find a good mixing routine for the ANALFO. Basically; considering the fact that the whole process with mixing is extremely messy, I could not take any smoking breaks or leave the work bench area at all. As soon as I initiate the mixing I literally turn into the tin man…, with a layer of AL dust all over me. As it is really difficult to remove this dust from the surfaces it touches, I end up smearing the stuff on my face (it gets on the inside of my mask when it touches the rubber straps) and on my fingers etc. To keep an acceptable pace I am therefore forced to work without a break for 5 hours (or until I complete 4 x 50kg bags). I’ve managed to reduce the work needed to complete one bag from 1.5 hours to 1.2 hours. The most time consuming aspect are all the ANFO lumps I have to crush manually with my fingers. The electrical cement mixer is really helpful though, and not dangerous to use at all, and will reduce the amount of time spent on each bag by 40 minutes (from 2 hours manually, to 1.2 hours with a cement mixer). I realize this is a vulnerable phase though, as it will be hard to conceal AL dust and hard to clean surfaces with AL smearing.
Tuesday July 12 – Day 72:
Evaporated RC fuel outside and mixed 4 bags (200kg) of ANALFO.
Found a good method to determine nitromethane vs. methanol content:
The boiling point of methanol is aprox 63ªC while the BP of nitromethane is aprox 100ªC. However, there is an even easier way to determine NM content. Just weigh it! Methanol is extremely light and nitromethane extremely heavy.
Methanol = 800g per liter
Motor oil = 875g per liter (might be wrong)
Nitromethane = 1195g per liter
(Water = 1000g per liter)
A gallon of Methanol = 3.78L * 800 = 3024g
A gallon of Motor Oil = 3.78L * 875 = 3307.5g
A gallon of Nitromethane = 3.78L * 1195 = 4517g
(A gallon of water = 3.78L * 1000 = 3780g)
I added water just in case due to the exothermic nature of methanol (it absorbs water/moisture from the air). In any case; it will now be easier to figure out which of my completed 8 batches of purified RC fuel has the highest NM content, simply by using a gram weight.
Wednesday July 13 – Day 73:
I cleaned my 3M gas mask today. It was full of AL powder/smearing and the multifilter were full of AL dust. Unfortunately; these are my last multifilters (particle and vapor filter combined) so I can’t replace them. I do have a couple of sets of particle filters but I believe they won’t be of much use to filter the diesel fumes when mixing ANALFO.
Continued to evaporate RC fuel outside and mixed 2 bags of ANALFO. After mixing the second bag I began to experience dizziness, blood pressure elevation and nausea, classical symptoms of excessive short-term exposure of diesel. Diesel is a vicious substance as it is absorbed even through most glove material. Nitrile gloves are best, neoprene somewhat good but vinyl gloves provide little or no protection. 
At this point in time, the clothing I am using to mix ANALFO are more or less soaked in diesel and I knew it was not healthy. But the problem is that using a hazmat suit for mixing is problematic as it will be very hard to labor while wearing it. I have another chemical suit that are more comfortable than the hazmat suit so I will try using that for the last batch. Diesel poisoning isn’t lethal, but will weaken your body over time. However, excessive exposure over a long period of time can shut down your kidneys, which will obviously be lethal. To somewhat counter all the crap I’ve been exposed to the last two months I’m using anti-toxin tabs (herbal supplements strengthening the liver and kidneys), protein supplements, creatine and a multitude of mineral/vitamin supplements.
Thursday July 14 – Day 74:
I’m not feeling so hot today. I’m in a weakened state atm. most likely due to diesel poisoning. It shouldn’t take more than 24 hours before my immune system has defeated the negative effects of this exposure. I hope I haven’t been overexposed as it may lead to acute kidney shutdown. Needless to say; I’m going to use my protective suit to mix the last 4 bags today. Finished the last 4 bags. Using the protective suit (fertilizer sprayer suit, used by farmers) proved to be better than expected, except the fact that I completely soaked my t-shirt and boxer with sweat by the time I was done.
Planning a train trip to the capitol tomorrow. I have to get up at around 06:00 tomorrow. Will do some errands while I’m there including picking up a van from AVIS car rental company (carrying cap 1340kg).
Damn, I was hoping the last 4 batches of RC fuel would be finished before the trip tomorrow.
Total weight of ANALFO, 18 bags = 900kg + 50kg ANALNM (inner charge) + 130kg (1 person + gear) + 80kg (mini MC) = 1160kg. The max carrying capacity of Volkswagen Crafter is 1340kg but it’s safer to leave a certain safety margin, just in case.
Friday July 15 – Day 75:
I took the train to the capitol today to pick up the car I had reserved. Took a taxi from the train station to the car rental company. Came back to the farm late in the evening.
Saturday July 16 – Day 76:
Took a taxi to the train station in the northern town to pick up the car. Did some errands and went back to the farm. Started removing the car rental sticker with the rubber-eraser-drill-bit. I had bought 4 of these specialty drill erasers which are designed to remove decor from cars. I used one and a half bit before I was done but there were significant traces left on the car. I treated the surface with a spray on de-greasing chemical three times but there were still some quite noticeable traces left. Will try a couple of more times tomorrow. Finished the last evaporation-purification of the RC fuel.
Sunday July 17 – Day 77:
Continued removing traces of the decor on the rental car. Washed twice with acetone then another round of degreasing. There are still significant traces but at this point I do not have time to take additional measures.
An unknown car drove in to the front yard today. As I went out to greet them I noticed it was just two women who had taken a wrong turn.
The neighbor started collecting the animal-fodder-balls from the field today. His activities delayed my work for several hours.
I weighed the 9 batches of purified RC fuel. I have a lot more than I need so I will just use two of the best batches.
Weighing 1.8L in a 2L beaker on a gram weight:
Batches 1-4 were evaporated from: 25% nitro, 12% oil, 63% methanol from 7.8L to 3L
Batches 5-9 were evaporated from 30% nitro, 18% oil, 52% methanol, from 7.8L to 3.9L
All the batches have an unknown water content (exothermic properties of methanol ftl.)
Batch 1: 1759g
Batch 2: 1753g
Batch 3: 1738g
Batch 4: 1730g
Batch 5: 1786g
Batch 6: 1779g
Batch 7: 1784g
Batch 8: 1771g
Batch 9: 1770g
Weight tests were somewhat inconclusive so decided to do an additional fire test, taking 20ml from the best batches and using a stop watch to see how long the flame burns.
Batch 1: 1:49 min Batch 5: 1:53 min
Fire test proved somewhat inconclusive but my gut feeling tells me that I should go for batch 5 and batch 7. It should be more than 50% nitromethane in the two batches.
Will create secondary detonator to be detonated from ANALFO, without booster in addition to the detonator with booster from the ANALNM inner charges). Will add a delay fuse of +30 sec for the secondary detonator. I feel this is the safest option if somehow the ANALNM mix proves to be a disaster.
Needless to say, I’m really not sure about the potency of the RC nitro oxidizer. My calculations indicate that the nitro content can be as low as 30% but I cannot confirm this as my weight estimate for the oil might be incorrect. In addition; I cannot verify the water content of the mix.
In any case; for the ANALNM material I will go for:
38kg AN 6L RC/nitro oxidizer 6kg AL 1.2kg MB
Total: 51.2kg of material
Monday July 18 – Day 78:
I completed the inner charge. However, the drum only had enough space for approximately 40kg of ANALNM. I poured the finished product into 2 x double plastic bags, the inner bags of the 50kg fertilizer bags. There were no problems at all mixing everything together in the concrete mixer. However, since I only made one inner charge I wish I had purchased pure AN (98%) from ice packs as it would be more potent than the 27-0-0 (85%ish) – farmer (C)AN.
Will have less time to update log from now on…
That night, after dark, I loaded in everything in the van. Still need to strap it properly in place though.
Tested gear.
Exhausted!!! Good workout though. I’m drinking 4 x protein shakes per day now to maximize muscle generation. At this point in time I should be fearful, but I’m just too exhausted to think much about it.
Placed PA to dry during the night.
Tuesday July 19 – Day 79:
Dried 1 out of 4 batches of PA/DDNP in the oven at 50-70ª C. First batch took 9 hours, wtf!! This is going to delay everything… Created anti-friction/shock stuffing by cutting up a madras and placing it in three layers in a card board box. I’ll use these to transport the booster and detonators separate from the main cargo.
Started packing down gear, filled diesel/gasoline on cars and mini-MC. Tested mini-MC. Treaded a fuse inside a surgical tube and tested it. There were 75 cm of fuse so it should burn for 75 seconds.
Due to the lack of oxygen in the tube it burnt in less than 2 sec!! Damn, I’m glad I checked this beforehand… No surgical tube then…
Went to a higher quality restaurant in the southern town and feasted. Yummy! Ive been working extremely hard the last few days and I’m completely exhausted. I have been using ECA stack to help keep this pace. Looks like I will have to take one more today…
Currently drying batch 2 out of 4. Hopefully I will complete it before I go to bed.
Dry PA etc. Test PA. Pack and load gear during day, Go to sleep at 22:00
06:30 – drive 1 Small, there 10:00 train back (11:00), there 14:00, taxi, there 14:30 drive 2. (there 17:00) Check area. Go to bed 18:30
Wednesday July 20 – Day 80:
Wake up at 02:30. Start downloading movie at 02:30, 05:30 Eat + pack, start seeding at 06:00. Done 08:30. Leave 08:30 Drive 1, Back 09:30 Drive 2 There 10:00 Leave There 10:45
Thursday July 21 – Day 81:
Drive 11 hours straight to Kautokeino, sort out cheap hotel
Friday July 22 – Day 82:
Initiate blasting sequences at pre-determined sites. Test dirt for gram of gold per kg. Have enough material for at least 20 blasts. Start capitalization of project as soon as I have results. Time is running out, liquidity squeeze inc. Call/email all my investor contacts with updated online prospectus/pdf.
This is going to be an all-or-nothing scenario. If I fail to generate acceptable precious metals yields, in combination with swift initiation of the capitalization for securing the areas I will be heavily indebted. I must complete capitalization of the mineral extraction project within August at latest! When I have the required seed capital I will have enough funds to employ the services of professional blasting engineers.
If all fails, I will initiate my career with a private security firm in conflict zones to acquire maximum funds in the shortest period of time to repay the debts.
First coming costume party this autumn, dress up as a police officer. Arrive with insignias 🙂 Will be awesome as people will be very astonished 🙂
Side note; imagine if law enforcement would visit me the next days. They would probably get the wrong idea and think I was a terrorist, lol :o)
Optimal time budget, one person –
ANFO: 3 x 600kg, PA: 3 x 0,5kg, DDNP: 3 x 10g
If I had known then, what I know today, by following this guide, I would have managed to complete the operation within 30 days instead of using almost 80 days. By following my guide, anyone can create the foundation for a spectacular operation with only 1 person in less than a month even if adding 2 “resting” days! 🙂
Day 1: Moving and getting your equipment and gear into place.
Day 2: Installing all equipment – fume hood, fan etc.
Day 3: Finishing the metal skeletons/cylinders for the blast devices and completing other practical issues relating to gear and equipment.
Day 4: Creating an evacuation/emergency strategy, packing an evacuation kit (survival gear etc.)
Day 5: Grinding 2.5kg of aspirin: 30 minutes with blender, manufacture of acetylsalicylic acid from aspirin (4 hours) + drying in oven (4 hours per batch x 3)
Day 6: Manufacture of acetylsalicylic acid from aspirin (4 hours) + drying in oven (4 hours per batch x 3)
Day 7: Boiling sulfuric acid using 4 cooking plates outside, from 23:00-07:00, 15-18L->5L of 90% +
Day 8: Boiling sulfuric acid using 4 cooking plates outside, from 23:00-07:00, 15-18L->5L of 90% +
Day 9: Creating Picric Acid (6 out of 12 batches using 3 x hot plate stirrers)
Day 10: Creating Picric Acid (12 out of 12 batches using 3 x hot plate stirrers). Completed
Day 11: Purification of Picric Acid
Day 12: Purification of Picric Acid
Day 13: Purification of Picric Acid. Completed
Day 14: Creating DDNP
Day 15: Creating DDNP. Completed
Day 16: Relocation of 27-0-0 fertilizer. Break down a 600kg bag into 13-14 x 50kg bags, load in the truck, drive to location where you are going to crush them if needed.
Day 17: Relocation of fertilizer. Break down another 600kg bag into 13-14 x 50kg bags.
Day 18: Relocation of fertilizer. Break down the last 600kg bag into 13-14 x 50kg bags.
Day 19: Initiate fertilizer grinding phase using 4 stationary blenders simultaneously. It will take aprox. 30-40 minutes to complete a full 50kg bag of ANFO, including the addition of the diesel and sealing the inner and outer bag with pieces of duct tape. It should be done nighttime between 23:00-07:00 as it’s quite noisy. The task also includes filling 20L plastic containers with diesel, and then breaking each 20L container down to 4L containers (empty distilled water containers) Complete 9 x 50kg bags of ANFO.
Day 20: Complete 9 x 50kg bags of ANFO.
Day 21: Complete 9 x 50kg bags of ANFO.
Day 22: Complete 9 x 50kg bags of ANFO. Completed.
Day 23: Mix in 2.5% (by weight) micro balloons and 10-15% (by weight) aluminium powder into the now hardened ANFO.
Day 24: Mix in 2.5% micro balloons and 10-15% aluminium powder into the now hardened ANFO.
Day 25: Mix in 2.5% micro balloons and 10-15% aluminium powder into the now hardened ANFO.
Day 26: Prepare trucks for transportation.
Day 27: Prepare trucks for transportation.
Day 28: Prepare trucks for transportation.
Day 29: Completed
The following chart illustrates labor required vs. risk of apprehension for individuals who are NOT already on any watch list.
| Risk vs. Labor |
Time required to complete |
Risk of apprehension |
| 1 person |
30 days |
30% |
| 2 person |
20 days |
60% |
| 3 person |
16 days |
80% |
| 4 person |
13 days |
90% |
| 5 person |
12 days |
90-95% |
The old saying; “if you want something done, then do it yourself” is as relevant now as it was then. More than one “chef” does not mean that you will do tasks twice as fast. In many cases; you could do it all yourself, it will just take a little more time. AND, without taking unacceptable risks. The conclusion is undeniable.
I believe this will be my last entry. It is now Fri July 22nd, 12:51.
Sincere regards,
Andrew Berwick
Justiciar Knight Commander
Knights Templar Europe
Knights Templar Norway
YES, MORE CSI DIY CROWDSOURCING PHOTO-ANALYSIS! If you could anticipate that criminologists would scrutinize surveillance videos for who left what at the scene, or who behaved oddly after a bomb blast, you could probably plan to evade detection, by, for example, bringing a larger bag to conceal the bag you’re going to drop off. 
OCCUPIED COLORADO SPRINGS- Occupy CSprings occupied the Walmart on 8TH STREET for our first of 12 Walmart Days of Christmas. Slogans you can use for your own superstore boycott: WALMART: ROLLING BACK UNION GAINS, ALWAYS — WALMART KILLS MOM & POPS — SHOP LOCAL, NOT WALMART and HEALTHCARE FOR CHRISTMAS. Up next: POWERS BLVD! 
PUEBLO, CO – Self-published self-abuser 
The MV Rachel Corrie set off from Ireland in darkness, prohibiting a public sendoff and certainly any good pictures. Their strategy to confront the Israeli navy during daylight presumes they will be able to cache whatever footage they get of their interception. Without third party witnesses, whatever befalls the relief ship will never see the light of day, even in the light of day.
Photos of the Rachel Corrie have been so sparse that media outlets are still using the image used on the Corrie’s unveiling, featuring a Photoshopped logo on her stern. Her previous name was still the Linda, but enthusiastic activists no doubt wanted to get the ball rolling.
into port by Israeli pilots. If the IDF account is to be believed, the activists offered the boarding party a ladder. So there it was, broad daylight, not a reporter present, in international waters where observers would have had every right to be.
Did it happen? I was beginning to wonder if the MV Rachel Corrie existed at all. Imagine donors and well-wishers and even the seasick crew told this is about aid, not publicity. It’s about one shipload, not the hundred ships Gaza needs. It seemed a cruel joke to make Gazans hopeful based on an effort that was never tangable, and then ultimately would never reach them.
The Israeli press is already running circles. A fleet of Israeli sailboats from the Herziliya Marina is preparing to greet the relief convoy with banners that say 
The cargo ship which sailed from Algeria today is the 
Meanwhile Israeli border patrol gunships continue to 
According to the 
Semiotext(e)
As you come in from the cold spell, think of the Coal River Mountain tree-sitters who are passing their seventh night in drizzling cold, getting by with just what they could pack in the first day, their support crews arrested, their trees now blockaded by fences. Attempts to resupply their brave squats have been intercepted, yesterday Ben Fiorillo was arrested, this morning, David Baghdadi. A flyover today yielded great photos, but no means of reaching the sitters with food, water, heat, batteries or ear protection against the high decibel air horns with which the coal mine security men have been harassing the activists. If you can conjure any alternatives for support, contact 
CLIMATE GROUND ZERO activist enter their 
GFM activists still